Add your idea or search for answers in existing topics. The most popular ideas will be implemented faster!
0
Waiting for user's reply

modbus exception

Евгений Лешкив 1 year ago in Products / Modbus • updated by Dmitry - support (expert) 1 year ago 3

Вижу такую ошибку:

[16-08-2016 16:41:08.897] ERROR CAbstractModbusDevice(1): FC128 Exception: 0

Подскажите, что она обозначает

0
Answered

Modbus TCP Server нет информации

Andrei1980 1 year ago in Products / Modbus • updated by Ekaterina (head of support) 1 year ago 3

Здравствуйте, собственно проблема заключается в том, что контроллер работает только мастером, необходимо по Modbus TCP подружить его с панелью управления , может есть какие примеры или документация как это реализовать? Спасибо.

0
Under review

Connection between Beckhoff PLC I/O adress to Modbus adress

Michel Smeysters 2 years ago in Products / Modbus • updated by Nielsm 1 year ago 24

Hi all,


I 'm new to iRidium and i am working on my first project.

I have a Beckhoff PLC CX8090 and communication to iRidium over Modbus TCP. I am having trouble adressing my variables in Modbus. Because I have little to no experience with Modbus TCP ....

Below you can see what i have found:


ModbusTCP: commands:


Name MW0 as adress in the PLC (just as reminder)


Push button to activate M0.0


Settings:


Send number 1 (dec) -> bin 0000 0001 this is M0.0 in PLC


Push button to activate M1.0


Settings:


Send number 256 (dec) -> bin 0000 0001 0000 0000 this is M1.0 in PLC


I can't find a way how to connect with the I/O's directly to the PLC.

Can anyone give a concrete example to me how I can retrieve / send certain addresses ? The inputs of the PLC i am using is starting from I19.0 , the outputs from Q19.0.


Twincat manager:



Inputs:



Outputs:



Dimmer module:



Thanks in advanced


Michel

0
Answered

Работа с ModBus TCP. Time of waiting for data is over!

Евгений Лешкив 2 years ago in Products / Modbus • updated 2 years ago 16

Подскажите, пжст, есть на объекте ModBus TCP устройство.

Никак не могу подключиться к нему через iRidium.

Лог:

[26-02-2016 16:47:59.928] DEBUG CAbstractModbusDevice(1): StartConnect()

[26-02-2016 16:48:12.433] ERROR CAbstractModbusDevice::WorkSend() packet waiting time is over!

[26-02-2016 16:48:13.489] ERROR CAbstractModbusDevice(1): Time of waiting for data is over!

[26-02-2016 16:48:13.539] DEBUG CAbstractModbusDevice(1): StartConnect()

Не получает ответа.

При этом штатный софт работает, т.е. данные есть и оборудование "живое". Сниффер также показывает, что данные идут. Параметры подключения верные.

0
Completed

Division of low and high bytes in 16-bit word

Ekaterina (head of support) 3 years ago in Products / Modbus • updated by Sergey (expert) 3 years ago 8
We get a decimal number (2 bytes) have to be converted to HEX, the low byte have to be separated from high byte. Separeated bytes have to be converted back to DEC to get two decimal digits by 8-bit.

IR.AddListener(IR.EVENT_TAG_CHANGE,IR.GetDevice("Modbus TCP"),function(item,value) // listener of ModBus TCP tag change
{
   if(item == "Feedback 1") //register name
   {
// we have a DEC number of 16-bit saved as a string
var dec2byte = "27542";
// Convert it in digit, and then in the HEX string
var hex2byte = parseInt(dec2byte).toString(16);
// Get the first byte from this string
var hexfirst = hex2byte.charAt(0) + hex2byte.charAt(1);
// Get the second byte from this string
var hexsecond = hex2byte.charAt(2) + hex2byte.charAt(3);
// get the DEC numbers from this HEX strings
decfirst = parseInt(hexfirst, 16);
decsecond = parseInt(hexsecond, 16);

IR.Log(decfirst)
IR.Log(decsecond)
});
0
Answered

Maximum number of MODBUS commands/feedbacks

D-man 4 years ago in Products / Modbus • updated by Oksana (expert) 3 years ago 10
Hello,

is there a maximum of MODBUS commands/feedbacks in Iridium?
I'm workin on a project with about 4000 MODBUS objects.
Is this gonna work of could this give some troubles?
0
Answered

Modbus variables

Flyavik Design 3 years ago in Products / Modbus • updated 3 years ago 6
How can I chahge variable in Modbus PLC internal program? (I use Insyte Spyder2 PLC)
F.E. If it needed to switch off leak sensors from iPad. In program I check flag-variable.
Answer
You can find an instruction for Spyder2 in this artilcle (at Russian only, Insyte equipment was not used in other countries before). Please infrom if you need it in english.
And here u can download an example.

U can find our previous discussions in your profile, it could help.
0
Answered

Read Modbus Status

oggi katic 2 years ago in Products / Modbus • updated by Dmitry - support (expert) 2 years ago 8

Hello Everybody.


Can somebody explain me how to read a status from a modbus device/adress.


Right now i can toggle light on/off. but i want to read a feedback, then if status is 0 the state 1 of a button is active.


I have these informations from my modbus controller.


0

PEHA modbus

Jurgen de Meulenaere 2 years ago in Products / Modbus 0

Anyone ever tried to connect a Peha 941 stm an (PLC) with Iridium Mobile?

0
Under review

Use Bits out of Holding Register Beckhoff Modbus TCP

Jarryd Milissa 2 years ago in Products / Modbus • updated by Ekaterina (head of support) 2 years ago 4
Hello,

i'm searching how i can communicate with mij ipad with iridium mobile and my beckhoff cx8090 controller for a building automation project.

i'm searching for a simple way to control bits that i wanna use to control some lights etc...
but i don't wanna control the hardware outputs immediately , i first wanna control this request in the program with other conditions before i set the hardware outputs.

but i can't find how i set virtual variables from iridium to beckhoff.
from what i found now i think this has to me written in the holding registers 3000 and 4000 of modbus

so i made a variable in beckhoff as you can see in image below:




and then i made in iridium next variable in the modes tcp driver:








this works fine an the value in beckhoff of holding out[3] and holding out[4] changing when i change in iridium.

but this isn't what i exactly want because i wanna sen bit command separately
for example :

button light 1 => set bit 1 in beckhoff


sound simple but i can't find how to do this,


i hope someone can help me with this or has example how to test this


thanks a lot
Jarryd