Modules

On this forum you can discuss iRidium modules with other users. Please post here your questions, ideas or errors you find.

0
Completed
Xopyc (expert) 10 months ago in HDL Buspro / HDL Sensor in One • updated 10 months ago 1


HDL Sensor in One


Type: Sensor

Developer: iRidium mobile

Manufacturer: HDL


The module enables display of Sensor in One devices in the HDL Buspro bus with manual input of parameters. The HDL scanner can be used for automatic search of HDL Buspro devices. Also the scanner downloads and installs modules for required devices without requesting parameters. The module works by the HDL Buspro protocol.


Functions:

  • The module displays value of 7 sensors: Air, Motion, 2 Dry contact sensors, Gas, Brightness and Temperature.

Sets of Events and Conditions enables use of all module functions in macros and scenes (routines).


Events:

  1. Brightness has become higher - Brightness has become higher than the indicated value;
  2. Brightness has become lower - Brightness has become lower than the indicated value;
  3. Gas has become higher - Gas has become higher than the indicated value;
  4. Gas has become lower - Gas has become lower than the indicated value;
  5. Temperature rises above - Temperature has become higher than the indicated value;
  6. Temperature drops below - Temperature has become lower than the indicated value;
  7. Locked - Dry contact has just been locked;
  8. Unlocked - Dry contact has just been unlocked;
  9. Movement - Motion detected movement;
  10. No movement - Motion detected no movement;
  11. Air state has changed to - Air has changed to the selected state.

Conditions:

  1. Brightness is higher - Brightness is higher than the indicated value;
  2. Brightness is lower - Brightness is lower than the indicated value;
  3. Gas is higher - Gas is higher than the indicated value;
  4. Gas is lower - Gas is lower than the indicated value;
  5. Temperature is above - Temperature is higher than the indicated value;
  6. Temperature drops above - Temperature is lower than the indicated value;
  7. Locked - Dry contact is locked;
  8. Unlocked - Dry contact is unlocked;
  9. Movement - Motion displays detected movement;
  10. No movement - Motion displays detected no movement;
  11. Air state is - Air is equal to the selected state