Modules

On this forum you can discuss iRidium modules with other users. Please post here your questions, ideas or errors you find.

+2
Dmitry Ryzhkov 6 months ago in Apple TV • updated by Aleksandr Romanov (CTO) 3 days ago 1

Hello everybody, moving projects in somebody:)))


New Apple TV Lite driver in the Cloud Store.


+1
Under review
Wouter Verbeeck 2 months ago in Domintell / Domintell Scanner • updated by Wouter Verbeeck 2 weeks ago 28

Today we tested scanning a Domintell infrastructure. Iphone 7; andriod on Huawai P9


Findings:

After scanning, we can find the serial numbers of the modules in the listing. Once selected eand imported, this serial number cannot be seen in the module overview nor in the module detail (i.e domintell relay).

Also, in the module detail, we cannot see the given names of each relay contact, name from Domintell on iPhone7, but we CAN on android (was ok in previous version of i3 lite).


Once assigned a few relay contacts (2 relmay modules, 2 contacts from each module) to a room, we found the following:

- We receive feedback from Domintell when the staatus of a relay is changedby a physical

button.

- We can not send command to Domintell relay module.


Please advice


regards,

Wouter

0
Answered
Vladimir Bykov 3 months ago in Other • updated by Ilya Markov (expert) 3 months ago 3

Please, tell me, how to make item of widget сonfigurable.Another words, what should I do to allow the user to change the text "Channel #1 title" in the widget.



0
Completed
Ilya Markov (expert) 3 months ago in BAS-IP • updated 3 months ago 1

The module enables control of BAS-IP outdoor panel.

When installing the module it is required to indicate parameters of the SIP server (the SIP server has to be set up in advance) and the device.
Functions:
  • Displaying video from camera;
  • Receiving call;
  • Opening door;
  • Calling to the outdoor panel (optional).
0
Under review
Theo Derks - NL (distributor) 3 months ago in Domintell / Domintell Scanner • updated by Ilya Markov (expert) 3 months ago 11

Hi,

when using the Domintell scanner with a DETH02 interface with a PASSWORD set OR a different portnumber set, the module is crashing.


Please add the possibility, to use a password on the DETH02 and add the possibility, to use passwords on the DETH02 interface.


Thanks


Theo


0
Under review
tol iwan 4 months ago in KNX / Blinds • updated 4 months ago 2

Добрый день.

Использую Berker 75310002 для управления роль-ставнями.

Загрузил указанные модули для управления.

Проблема в том, что данные модули в настройках на открытие/закрытие имеют различные адреса, а для остановки видимо отсылают отключение на оба адреса. А мое устройство имеет на открытие/закрытие один адрес и на остановку другой.

Т.е. я указываю в модулях для открытия и закрытия один и тот же адрес и эти функции работают, но остановить в нужном положении я не могу.

Может есть модуль с таким функционалом или стоит добавить в указанные модули еще поле адреса для установки?

Спасибо.

0
Answered
Jan Aage Dambo 4 months ago in HDL Buspro • updated by Aleksandr Romanov (CTO) 4 months ago 3

Hallo It Seams for me, that the server sync does not work Property. If i USE my Phone and sync, the last modifications to Cloud , IT does not show on my IPad.

0
Completed
Eivind Bø 5 months ago in HDL Buspro / HDL Sensor 12 in 1 • updated by Ilya Markov (expert) 4 months ago 5

How do we control the two relays?


12in1 relays are often used to control garage Doors. It is a impulse type where a closed AMD then opened relay will open or closed garage door. Can we make a button for that? In hdl panels we can use a momentary button

0
Ilya Markov (expert) 5 months ago in iBezel 0

iBezel

With this module you can control some of iRoom-iBezel features, such as volume value, relay state, input state.

Also you can receive feedbacks from device, like button pressing/releasing, digital input states, volume value, an so on.
Events like "Button 1 pressed" allows you to create rules that will trigger any actions.
0
Completed
Ilya Markov (expert) 5 months ago in Domintell / Domintell Sound Module • updated 5 months ago 1

Domintell Sound Module

The module enables control of Sound module in the Domintell bus. Enter the parameters to control the device:

Host, Port, Password (if set) of the bus, serial number of the device.
Supported modules: DAMPLI01.
Functions:
- Source control;
- Volume control;
- FM tuner.
A set of Actions, Event and Conditions allows you to use all module functions in macros and routines:
Actions:
1) Source - to select the source;
2) Volume - to set the volume;
3) Tuner (FM) - to tune the radio.
Events:
1) Source - the source has changed to the indicated value;
2) Volume higher - the volume has become higher than the indicated value;
3) Volume lower - the volume has become lower than the indicated value.
Conditions:
1) Source - the source is set up to the indicated value;
2) Volume higher - the volume is higher than the indicated value;
3) Volume lower - the volume is lower than the indicated value.