On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.

Please subscribe to the Change Log to know our news

Under review

[KNX] 2 bits feedback not work

Francesco Zangara 3 months ago in Products / KNX • updated by Dmitry - support (expert) 1 month ago 17

On my project have 10 presence sensors KNX. I need to force it with 2bits switch control and show the actual status.

I insert a command and a feedback on knx ip router driver (i not try with baos). Command work fine, but feedback not change when i send the command from iRidium or another device on KNX (for example an pushbutton).

Studio version

Server version


UMC Read on start?

Tanapol E. 4 months ago in Products / KNX • updated by Dmitry - support (expert) 2 months ago 6

V 1.1.8

Hi, I try to change my device from rPI + ip router to

UMC Device by change device type to 

then upload to cloud and re download project

but it look like UMC Device won't read anything on start ("read on start" is  set to "True")

of UMC server was restart everything will show as "OFF"?

On ETS5 pc, when use rPI + ip router, when restart irserver I can see GroupValueRead on bus monitor

like this: (1.1.99 is my ip router)

but no GroupValueRead when using umc server...


[Server][KNX] How to set server physical address with KNX IP Router/Interface?

Francesco Zangara 4 months ago in Products / KNX • updated by Aleksandr Romanov (CTO) 4 months ago 7

If I have a project with KNX IP Interface or KNX IP Router, iRidium send command on KNX with address 15.15.250.

This is not correct if the interface/router stay on other line (for example 1.1.xxx).

How can I change the physical address used from iRidium?

Under review

Compatibility for Weinzierl KNX IPBaos774 and IP Interface 730/731

Francesco Zangara 5 months ago in Products / KNX • updated by Mikel Bur 3 months ago 37

iRidium Studio is compatible with IPBoas774, IP Interface 730 and 731?

Studio not find this devices during import.


Will USB KNX / Raspberry Pi Interface work with IR server?

Tanapol E. 5 months ago in Products / KNX • updated 4 months ago 8

Will USB KNX Interface work with IR server?

such as this one 


or this one

rPI will see this as /dev/ttyAMA0 not sure if I can use kBerry for this or not?)


how to run scenes in iridium

sachinb 8 months ago in Products / KNX • updated by Aleksandr Romanov (CTO) 8 months ago 2

button with 3 different status

Duncanvsmith996 10 months ago in Products / KNX • updated 10 months ago 3

I get 3 fan statuses low (0/1), med (0/1) and high(0/1). I want to change and indication of a button in 3 different states.What button type must I use (trigger)?



Доступ к BAOS через интернет

i3pro работает с BAOS по внешнему статическому ip стабильно в Москве и области и из многих других мест (объект в Москве). Но, клиент перемещается по тем местам где он не работает (Сочи, Испания, США...). Там связи с BAOS нет, причем отображение ip камер на этом объекте в i3 работает везде. Как можно объяснить это, а лучше решить проблему? (Мысли: TTL маленький, ping большой, блокировка портов операторами...)

P.S. В Испании через прокси работает. Проблема на разных объектах


Is your KNX driver manufacturer specific?

Laynd 1 year ago in Products / KNX 0

Will Shneider MTN6500-0113 KNX IP Router work with Iridium KNX drivers? I am new to KNX platform, need some insight.

Waiting for user's reply

How to control KNX through internet by using knx ip router

Punith 1 year ago in Products / KNX • updated by Dmitry - support (expert) 1 year ago 4

We are using KNX - IP ROuter and HDL KNX devices are connected in the control panel , It works locally while we try to connect through internet it does not work, Kindly make a solution for it, Advanced thanks