Welcome!

On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.


Please subscribe to the Change Log to know our news

+7
Voting
Евгений Лешкив 1 year ago in Server Solutions / UMC Server • updated by Петр Андреев 10 months ago 2

At the moment reading of KNX channels on the UMC server is not supported.

How can the request for reading from the KNX system be processed by scripts?

Answer
Oksana (expert) 1 year ago

Здравствуйте, Евгений

Простите за длительное ожидание ответа. Данный функционал нельзя реализовать на скриптах, требуется доработка в серверном приложении.

Исправила ваше сообщение под идею и выставила ее на голосование

+5
Voting
Theo Derks - NL (distributor) 3 months ago in Server Solutions / UMC Server • updated 3 months ago 3

Hi,

i think it's a good idea to have the possibility to change the name of de iRidium Server (UMC/RPI) in the webinterface. Now, this is only possible in Linux, but installers wants the possibility to change this also by themself in webinterface.


Thanks


Theo


+4
Answered
Евгений Лешкив 1 year ago in Server Solutions / UMC Server • updated by Oksana (expert) 1 year ago 7

Как настроить дату и время на UMC сервере?

E меня сейчас 1970й год

Answer
Oksana (expert) 1 year ago

Добавим в вэб панель, этот функционал.


Выбор часового пояса и установка даты и времени.

+3
Theo Derks - NL (distributor) 3 months ago in Server Solutions / UMC Server • updated by Romain LE CAN 6 days ago 1

Hi

In The Netherlands and many other countries in Europe, we have daylightsavingtime now. (time is set 1 hour forwards).

Now, it's not possible to set the date and time correct in UMC Server.

For example:

It's 2th april 2017 now - 22:18 hour

If i set this time into UMC- server webinterface, the only possibility is to set it like this:



But then, the result of this, the time is changed to 23:18 !


Please correct this, this is a big bug for the server, because now time-based clocks are not working ok!


Thanks


Theo


+2
Completed
Lukas Korsakas 3 months ago in Server Solutions / UMC Server • updated by Aleksandr Romanov (CTO) 1 month ago 10

Hello,


I would like some help with server-side script, which would receive IP-notify from mobotix T25, so push notification could be sent.


This solution would be perfect as direct SIP call is not possible to iridium app, running in background mode.

+2
Completed
Theo Derks - NL (distributor) 1 year ago in Server Solutions / UMC Server • updated by Oksana (expert) 5 months ago 4

Hi,

Please make it possible to use the iRidium UMC KNX Server like an IP-interface for programming (with the ETS-software) the KNX-installation.


Thanks


Theo


Answer
Oksana (expert) 5 months ago

Hello,


You can check it from Server 1.1.1. Documentation.

+2
Voting
Евгений Лешкив 1 year ago in Server Solutions / UMC Server • updated by Oksana (expert) 1 year ago 7

Добрый день!

Запрос на чтение канала из KNX игнорируется.

Т.е. сервер подключается по IP к устройству, получает состояние.

После этого я подключаю KNX и отправляю запрос на чтение канала, ответа не приходит.

Это стандартная функция в KNX. Это очень нужно.

+1
Not a bug
Петр Андреев 10 months ago in Server Solutions / UMC Server • updated by Oksana (expert) 5 months ago 1

Добрый день.

Необходимо подключить ком порт к UMC иридиуму серверу.
На сервере UMC com to usb появляется как устройство /dev/ttyUSB0.

И миником спокойно подсоединяется

Но иридиум его не видит.
Хотя на расбери пи такие же настройки и работают

Готовы дать все доступы

0
Answered
AdG 1 week ago in Server Solutions / UMC Server • updated by Aleksandr Romanov (CTO) 1 week ago 4

I followed the manual: http://dev.iridiummobile.net/IRidium_Server_UMC/en

My question is: When should routing be turned "ON"?


Create an empty script file (JS icon on the top toolbar + New Script) and add the script in it:

IR.AddListener(IR.EVENT_START,0,function() 
{
   var KNXSerial = "KNXIPClientSerial";   // name of KNX Serial driver in your project
 
   if(IR.GetDevice(KNXSerial)) { 
      IR.GetDevice(KNXSerial).SetParameters({ServerDevice: "iRidium Server"});
   }
   IR.CreateDevice(IR.DEVICE_KNX_IP_SERVER, 
                  "iRidium Server", {Port: 3671, 
                  ClientDevice: KNXSerial,
                  Routing: false // true - to turn Routing on
                  });
});

After the project with the configured driver and script is launched on the UMC, you will be able to find the UMC in ETS and use it as an interface to access the bus.