Welcome!

On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.


Please subscribe to the Change Log to know our news

0
Under review

[KNX] 2 bits feedback not work

Francesco Zangara 3 months ago in Products / KNX • updated by Dmitry - support (expert) 1 month ago 17

On my project have 10 presence sensors KNX. I need to force it with 2bits switch control and show the actual status.

I insert a command and a feedback on knx ip router driver (i not try with baos). Command work fine, but feedback not change when i send the command from iRidium or another device on KNX (for example an pushbutton).


Studio version 1.1.8.19555

Server version

0
Answered

[Server][KNX] How to set server physical address with KNX IP Router/Interface?

Francesco Zangara 5 months ago in Products / KNX • updated by Aleksandr Romanov (CTO) 4 months ago 7

If I have a project with KNX IP Interface or KNX IP Router, iRidium send command on KNX with address 15.15.250.

This is not correct if the interface/router stay on other line (for example 1.1.xxx).

How can I change the physical address used from iRidium?

0
Answered

Compatibility for Weinzierl KNX IPBaos774 and IP Interface 730/731

Francesco Zangara 5 months ago in Products / KNX • updated 1 day ago 39

iRidium Studio is compatible with IPBoas774, IP Interface 730 and 731?

Studio not find this devices during import.

0

Will USB KNX / Raspberry Pi Interface work with IR server?

Tanapol E. 5 months ago in Products / KNX • updated 4 months ago 8

Will USB KNX Interface work with IR server?

such as this one 

https://www.weinzierl.de/index.php/en/all-knx/knx-devices-en/knx-usb-interface-311-en

or this one

http://www.eelectron.com/prodotto/raspberry-pi-knx-interface/?lang=en
(
rPI will see this as /dev/ttyAMA0 not sure if I can use kBerry for this or not?)


0
Answered

how to run scenes in iridium

sachinb 8 months ago in Products / KNX • updated by Aleksandr Romanov (CTO) 8 months ago 2
0
Answered

button with 3 different status

Duncanvsmith996 11 months ago in Products / KNX • updated 10 months ago 3

I get 3 fan statuses low (0/1), med (0/1) and high(0/1). I want to change and indication of a button in 3 different states.What button type must I use (trigger)?

thanks!

0
Answered

Доступ к BAOS через интернет

i3pro работает с BAOS по внешнему статическому ip стабильно в Москве и области и из многих других мест (объект в Москве). Но, клиент перемещается по тем местам где он не работает (Сочи, Испания, США...). Там связи с BAOS нет, причем отображение ip камер на этом объекте в i3 работает везде. Как можно объяснить это, а лучше решить проблему? (Мысли: TTL маленький, ping большой, блокировка портов операторами...)

P.S. В Испании через прокси работает. Проблема на разных объектах

0

Is your KNX driver manufacturer specific?

Laynd 1 year ago in Products / KNX 0

Will Shneider MTN6500-0113 KNX IP Router work with Iridium KNX drivers? I am new to KNX platform, need some insight.

0
Waiting for user's reply

How to control KNX through internet by using knx ip router

Punith 1 year ago in Products / KNX • updated by Dmitry - support (expert) 1 year ago 4

We are using KNX - IP ROuter and HDL KNX devices are connected in the control panel , It works locally while we try to connect through internet it does not work, Kindly make a solution for it, Advanced thanks

0
Completed

KNX FT1.2 Serial/USB driver

Dmitrii P 2 years ago in Products / KNX • updated by Dmitry Shulgin 2 years ago 2
Драйвер для
Weinzierl KNX USB Interface 311
/330/USB других производителей
и
KNX Serial BAOS 870

то чо можно непосредственно воткнуть в сервер, исключив LAN