Welcome!

On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.


Please subscribe to the Change Log to know our news

+5
Completed
Theo Derks - NL (distributor) 2 years ago in Server Solutions / OnBox Server • updated by Oksana (expert) 1 month ago 7
Hi,
Every installer knows: you have to use static IP-addresses in Home Automation devices.

This is one of the most important issues for a stable Home Automation configuration.

But in the current version, the OnBox can not be configured with a static IP-address. This is absolutely needed in the first public release of iRidium Server for OnBox. NO INSTALLER will use Unix commands to set a static IP-address in the OnBox. NO WAY.


Please add a graphical and easy-to-use module to configure ALL network settings of OnBox iRidium server:

Configure DHCP or Static

If choose static:
IP-Address
Subnet mask
Gateway
DNS1-ip-address
DNS2-ip-address

Thanks

Theo







Answer
Oksana (expert) 1 month ago

Hello Theo,


Now we have a the OnBox system image file for testing (static IP and ntp time):

http://www.iridiummobile.net/redirects/?go=OnBox_system_image_file


Instruction for OnBox Firmware Replacing:

http://support.iridiummobile.net/topics/8652-pereproshivka-onbox-cherez-operatsionnuyu-sistemu-windows/


You should use version server from 1.0.11

+1
Answered
Evgeny 4 months ago in Server Solutions / OnBox Server • updated by Oksana (expert) 4 months ago 3

Добрый день.

После обновления сервера до версии 1.0.11.10919 происходит частое переподключение i3 Pro на ПК с Win10 к OnBox'у со сменой портов, насколько я понял. Если подключаться к серверу на ПК такой проблемы не возникает. С чем это может быть связано? Логи прикреплены (взяты разные временные интервалы, но там все аналогично)

Лог с i3 pro

Лог с OnBox

Answer
Oksana (expert) 4 months ago

Здравствуйте Евгений

Исследовали ваш вопрос, проверьте пожалуйста работу в новой версии 1.1.0

+1
Answered
Jackie Roos 2 years ago in Server Solutions / OnBox Server • updated by Oksana (expert) 1 year ago 10

Hi

How can I check the onbox is working?


I cannot browse into it

I cannot find a reset button on it

I cannot find it in tranfser (raised separate private ticket for that)


I can ping it



But how do I know if it is working???



Answer
Oksana (expert) 1 year ago

Hello Jackie,


I cannot browse into it

What IP address do you use? http://IP_onBox:8888 Try with it, else not.

Did you wait 5 minutes after start onBox for generating sertificate?


0
Answered
Barry Jones yesterday at 4:55 a.m. in Server Solutions / OnBox Server • updated by Aleksandr Romanov (CTO) yesterday at 8:40 a.m. 1

hi looking for the most current onbox server IMG file for download

0

Hi


1.1.3 on OnBox

Question marks are not working.


Please fix

Thanks


Theo


0

Hi

Onbox

iRidium Server 1.1.3


When changing the log size limit, and press "Save Change" , the new size is not saved.


Please fix


Thanks


Theo


0
Fixed
Lukas Korsakas 5 months ago in Server Solutions / OnBox Server • updated by Oksana (expert) 4 months ago 5

My onbox keeps crashing after few hours of work. I only have KNX project without any scripts or logic. 190 KNX objects.

Firmware of IS is of Dec 2.



Answer
Oksana (expert) 4 months ago

Hello everyone,

You can check it from Server 1.1.1

0
Answered
Evgeny 7 months ago in Server Solutions / OnBox Server • updated by Oksana (expert) 4 months ago 14

При попытке отключить Test mode в web-интерфейсе сервера появляется окно:


При попытке обновить список проектов из облака ничего не происходит, при попытке деактивации сервера тоже выдает ошибку подключения к облаку. Подключение к интернету есть, не понятно в чем может быть причина.


Версия сервера:

iRidium Server (build 1.0.7.9812, Oct 12 2016 15:38:54) | Web-panel: v1.0.0.29 (Jul 19 2016)

Answer
Oksana (expert) 4 months ago

Здравствуйте Евгений,

Появился образ OnBox для тестов:

http://www.iridiummobile.net/redirects/?go=OnBox_system_image_file


Инструкция по перепрошивке:

http://support.iridiummobile.net/topics/8652-pereproshivka-onbox-cherez-operatsionnuyu-sistemu-windows/?lang=ru

0
Under review
Jackie Roos 8 months ago in Server Solutions / OnBox Server • updated 8 months ago 2

Hi

We have a driver that sends 3 x IR commands, eg 0,0,1 to change channels via a GC IP2IR.


When we put this driver on the OnBox, the IR is intermittent - sometimes, one flash, sometimes two flashes and sometimes three flashes


When this driver is sending from Server on a Windows laptop it is consistently sending three correct flashes, as we would expect.


We are guessing this is the processing power of the OnBox?


What can we do so improve the OnBox performance?


Thanks

0
Answered
VPS Jarryd 10 months ago in Server Solutions / OnBox Server • updated by Dmitry - support (expert) 10 months ago 2

where i can set the gateway adress of onbox server?

when i started in factory mode i could connect en see it appear in iridium transfer V3

but when i change it to static ip like explained in the documentation file then it doenst appear

anymore in the transfer list when i search.


this is what i tryed now setting up the gateway , hoping i can see it again appear:


# Configure Loopback

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 192.168.0.103
netmask 255.255.255.0
Gateway 192.168.0.1
auto usb0
iface usb0 inet static
address 192.168.42.1

netmask 255.255.255.0

Answer

solved thanks to Theo,



Seems Gateway has to be writen without Big G! so for other users


adress : 192.168.0.xxx

netmask: 255.255.255.0

gateway: 192.168.0.1