Welcome!

On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.


Please subscribe to the Change Log to know our news

0

Hi,


for a touring project we need the ability to remotely control a some devices via a UDP command.

But theres no change to get them all together in a seperate LAN, so the idea came up to use one iRidium Server at the company office working as a "Command"-Server. And using additional iRidium Servers with each device that needs to get an UDP command, and that connected via the Internet.


Here's a schematic picture:


The number on the "Sub Servers" is not constant. So, the plan was to make 1 Sub-Server project that connects to the Main-Server. Is this a possible scenario? And, how to setup the Main iRidium Server to be connected by all of these Sub Servers?


The goal is that a iRidium Client that is connected to the Main iRidium Server (iPad) has a simple Interface and can trigger a Remote-Command to the Main-Server. Then the command should be sent out to all the Sub Servers, and they should send out that command via UDP to a connected MediaPlayer.


Ciao

Martin

0
Answered
Lukas Korsakas 4 months ago in Server Solutions / LogicMachine Server • updated by Aleksandr Romanov (CTO) 2 months ago 9

Hello, do You have iridium server package file ready for LM5?


Thank You.

0
Answered
Sorokin 7 months ago in Server Solutions / LogicMachine Server • updated by Oksana (expert) 3 months ago 8

Какой тип драйвера и какие настройки должны быть в настройке knx соединения сервера установленного на logic machine? (knx подключен соответственно к LM напрямую)

0
Answered
Lukas Korsakas 8 months ago in Server Solutions / LogicMachine Server • updated by Oksana (expert) 6 months ago 1

Hello, Is it possible to import ETS project with all the group addresses to irdium server, and so those commands would be like LMx KNX commands, not KNX IP router KNX comands?

Can't find any way how to do it and don't want to fill 600 grp addresses manually :/

Answer
Oksana (expert) 6 months ago

Hello Lucas,


You can transform a driver:


0

i have iridium server run on LM3-reactor 2.

Server+Visual License purchased and installed and it ran for about a day then it is disconnected. I have to log on web portal <ip address>:8888 and go to "restart server" to bring it back online. It happens to me 3 times in the last 3 days.


On the server web browser portal - > drivers -> logicMachine(Server) -> Driver Log -> Device Online field it says "online" but

On the server web browser portal - > drivers ->iridium Server-> Driver Log -> Device Online field it says "not online" (a day ago it says "online").

This is strange as Logic Machine (server) and iridium server are actually the same device on same IP address.


Anybody can shed somelight what happens?


aree_5.4_Server.sirpz




0
Completed
Lukas Korsakas 10 months ago in Server Solutions / LogicMachine Server • updated by Dmitry - support (expert) 10 months ago 1

is it possible to control DALI directly, with iridium server running on LM4?