0
Answered
Paolo Scarpetta 6 months ago • updated by Thales Cavalcanti 2 weeks ago 12

How can I control the IR emiter in IRIDIUM LITE?

GOOD, I'M SATISFIED
Satisfaction mark by Paolo Scarpetta 6 months ago
Answered

The iRridium Store has a module "HDL IR" for this

How can I use it, because I tried to add it but the information is "is not  required"

What is the model of your device?

Sorry, I mean model of your HDL IR emitter. What shows HDL scanner? You have "is not required" text and model name with gray font. Type the model name.

Did you check the firmware versión?, if It is an old versión you have to add the UV in commands section :)

Thanks I will check it
How can I add the UV command?

I have tried with logic module as you did before but did not work

Thales Cavalcanti
Enviado via iPhone

HDL-MIR01F.20

 

logo Techdomus-word

 

Eng.Thales Massud Cavalcanti

12 3941-7748

Thank you. We will check the model in our device base. 


I need this information so you will be able to add it with scanner.


For now you can use HDL IR module from iRidium store. You need to enter device parameters manually. By default the module is empty. Add a remote by pressing the "+" button in the HDL IR module section and setup it.

OK, now I can do it work

 

Thanks

 

Is not possible to create the project in my windows 10 notebook?

 

I saw that many devices did not appear in Device list.

 

Thanks

 

logo Techdomus-word

 

Eng.Thales Massud Cavalcanti

12 3941-7748

This should be possible to work with i3 lite on windows 10.

Sorry, but this topic is about HDL IR. If you have some issues with i3 lite work on windows, please, create a new topic.

Sorry

Thales Cavalcanti
Enviado via iPhone