+3
Martin Lang 3 months ago in Products / HDL-BUS Pro • updated 2 weeks ago 1

Hi,


ALL the new HDL Wireless devices have also a 4channel drycontact input. When an input is changed, the modules automatically send out a "Dry contact broadcast message". But iRidium does not recognize these messages. So you have to repeatly request the status of each channel on every wireless device over and over again. Please include the broadcast message datagram into iRidium PRO as soon es possible, so iRidium can react directly to an input change. And also decreasing the bus traffic!


I attached a screen shot. I have a status request for channel1 and channel2 running every 10 seconds. When the status changes, you see that the module automatically send out a broadcast of each channel that is changed (Line 39 and 51). In this case channel2 changed from closed to open and back again to closed.


So, iRidium has to process the OP-Code 15D0 correctly!


Best regards,

Martin Lang - MEB Austria