0
Fixed
Tanapol E. 2 months ago in Products / KNX • updated by Dmitry - support (expert) 1 week ago 6

V 1.1.8


Hi, I try to change my device from rPI + ip router to

UMC Device by change device type to 

then upload to cloud and re download project


but it look like UMC Device won't read anything on start ("read on start" is  set to "True")

of UMC server was restart everything will show as "OFF"?


On ETS5 pc, when use rPI + ip router, when restart irserver I can see GroupValueRead on bus monitor

like this: (1.1.99 is my ip router)



but no GroupValueRead when using umc server...

But is working fine

If I add one KNXSN then enable routing mode


then another KNX IP

and setting IP to itself

like this: (192.168.1.222 is IP of UMC server, which mean UMC connect KNXIP to KNXSN within it self)



but it look like UMC Device won't read anything on start ("read on start" is  set to "True") of UMC server was restart everything will show as "OFF"?

Correction:

but it look like UMC Device won't read anything on start ("read on start" is  set to "True") 

when UMC server is restart everything will show as "OFF"?

Under review

Hello!


Thanks for the info! The problem described by you has been confirmed, we will try to fix it in the next versions

Started

Hello!


We fixed the problem you specified. Please check in beta version 1.2.0

Fixed

Hello!


We fixed the problem in version 1.2.0