If you have a system with two or more AMX processors ...

This system should work with two processor with different system number, even if they are on the same network. You can make the Site license work with both processors.

- If you have two panels, each of which connects to its own controller, then you will need 2 Site licenses (one for each processor). The panel connects to the licensed controller (by its IP), checks its serial number and works.

- If you have to set two panels connected to both processors at the same time, you cannot do it with TP4, but CAN do it with iRidium GUIEditor. The project configured to work with 2 processors need only one Site license (for one processor), the second one will work automaticly when the firstworks.

- If you just need a Device License then it doesn't matter what controller it connects to. The Device license is assigned to the ID of the control panel it works on.

Is this article helpful for you?