Welcome!

On this forum you can discuss iRidium with other users.

iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.


Please subscribe to the Change Log to know our news

We have moved our support service to a new technical support system. Since 17.01.2022, we have disabled the ability to create appeals through the userecho personal account. Now all requests are processed via mail to support@iridi.com .

Thank you for your understanding and have a nice day.

0
Answered

How to emulate project?

evg 8 years ago in Server Solutions / UMC Server updated by Oksana (expert) 8 years ago 13

How to emulate project prepared for UMC?

I've downloaded one but can't understand that it is working.

0
Voting

UMC server can't found in Transfer when wrong Gateway IP-address is used

Theo Derks - NL (distributor) 8 years ago in Server Solutions / UMC Server updated 8 years ago 4

Hi,

When this is the situation in the configuration of the UMC Server:
IP-address: 192.168.1.57

Subnet mask 255.255.255.0

Gateway: 192.168.0.1


The Transfer is not able to find the UMC-server.


Please give a warning if the installer is using a Gateway IP-address that is not in the same subnet like the IP-address:


"Warning: the specified IP-address is not in the same subnet like your Gateway IP-address. Continue? "


Thanks


Theo


0
Answered

KNX драйвер на борту UMC

evg 8 years ago in Server Solutions / UMC Server updated by Oksana (expert) 8 years ago 46

Зашел на WEB. Теперь вопрос по работе KNX драйвера на борту UMC/

Добавил драйвер KNX Serial. В нем сделал одну команду и один канал ОС. Загрузил. На странице сервера переменные появились

Image 11143В сети KNX через ETS пишу значение в эти переменные - на WEB ничего не меняется. Если использовать Set на странице сервера, то в KNX тоже ничего не приходит.

Зашел во вкладку Драйверы и выбрал KNX.Пункт Device Online bvttn значение "offline". Так и должно быть?

Может что с настройками драйвера в Студии?

Image 11146

0
Under review

Не могу попасть на сервер через WEB

evg 8 years ago in Server Solutions / UMC Server updated by anonymous 8 years ago 6

Не могу попасть на сервер через WEB.

Какими средствами можно понять, что сервер запущен? Должна быть, наверное, команда через Putty.

Сервер пингуется, файловую структуру его вижу, по телнет доступ получаю.

Инструкций честно говоря маловато.


0
Answered

Есть ли у сервера функции KNX/IP?

evg 8 years ago in Server Solutions / UMC Server updated by Oksana (expert) 8 years ago 5

Есть ли у сервера функции KNX/IP?

ETS его не обнаруживает.