Welcome!On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.
Please send your questions to support team as a private messages.
It is not convenient to store the information in a separate text file. It would be good to have a tab on the right, next to Device, Project - Notes. When clicking on it the window with notes could appear. And you could add, delete notes and mark them done with indication of time.
Installers need the option, that end-users can change the scheduled timers/clocks that are defined in iRidium Server.
Also values, used in routines, have to be changeble by end-users. For example set-points for temperatures etc: end-users must be able to change them by theirself.
PLease implement this.
There is a great opensource Home Automation System, called openHAB available. The problem of those systems is actually lack of nice looking GUIs for users.
iRidium could solve that problem if there would be a feature available, which could connect to OpenHAB server over ethernet.
Did anyone try this? What options are available?
It would be great to have a similar property to Wrap Text in a Button item called Scroll Text. When this is enabled and the length of the text exceeds the size of the button then the text becomes scrollable.
i'am a user from the beginning, and i like whats going on with iRidium Mobile.
would it be possible to make a iRidiumServer version for the whole synology nas family too?
either as a normal programm package or as a docker? would be really really cool if it runs on the synology nas with two ethernet ports. so eth1 could be used as the normal "house"-lan port and eth2 could be connected to the ip/ethernet interface of the bus system. and in most cases, a nas is allready there and running 24/7, so why don't use it as the server? and its linux, and stable too...
with best regards,
We plan to support Synology and Qnap, but not in the first release
It has been implemented from iRidium Studio 184.108.40.20611 (beta)
Use the attached project,
Set the IP Address to the GC driver to local ip of the global cache device you have.
run the project
Device is shown online
Unplug the network connector from the global cache device
the device still shows in the emulator the device is connected.
Next, turn off\unplug the network cable on your system running the emulator so that there is no network access.
The emulator still shows that the global cache driver is connected.
Update::: I have tested this with KNX IP Router, this will timeout the connection when the timeout value is reached with both cases. It should put the driver into a offline state the moment the internet connection is down.
Then I tested this with the AV TCP driver, again the same as the GC Driver.
To conclude; firstly there should be a configurable timeout setting for all drivers like the KNX IP Router driver.
Secondly, the moment that the internet connection is lost, ie no wifi, wifi card turned off and with wired network connections, network card gets disabled or network cable unplugged then ALL drivers configured in the project should be pushed into an offline state.
Customer support service by UserEcho