0
Under review

Error Delay Iridium

dungVN 8 maand geleden in Bugs and problems bijgewerkt door Vladimir Ovchinnikov 4 maand geleden 1

I am working on a project using iridium pro software, knx schneider. There is an error I am making:

Software iridium when running the simulation, when I impact on the object such as: turn on the light, open, close curtains But the system has to wait 2 minutes to execute the command: light on, curtain opening and closing.

But when I directly affected the object value (light on and off, curtains opened and closed) on the central control unit (homelinks), the maximum effect was to change the value immediately (lights on, off, blinds closed, open )

My iridium file is too large to upload here 

Does anyone know this error?file iridium pro

11111.png

File iridium pro

https://drive.google.com/file/d/1OoWfVKE8G1_vrZT2yW8GuDsx8y7rcTv2/view?usp=sharing

Under review

Hello.

Do you connect to KNX from the Internet? Check whether there will be a delay when connecting from the local network. If the delays are from the local network, leave 1 channel and feedback in the KNX driver, then check again whether there will be delays.