is er zicht op i3 lite met de domintell websocket connectie? (nieuwe master dgqg04)?

Works fine, except for quality of sip image. We bought the http license for 2N, which is one time investment.

if necessary you can always go trough linphone SIP server (free and online), but we did not create configuration for that one.

Kind regards,

Wouter

Hi again,

the scanner seems to work perfectly on windows, but not on IOS device or android. neither iphone nor ipad or huawei phone.

To program we are able to scan with wondows, save i ncloud and then download on ios or android device.

Please advise.

kind regards,

Wouter

if you use raspbx on a pi as sip-server, it works good. You can make contact, but last september we had an issue with poor image quality. Not sure if this is fixed yet.

kind regards

Wouter

Beste,

ik heb dit probleem ook al eerder ondervonden. Blij dat er een oplossing komt.

gr,

Wouter

Hello,

It has been a while since I have had the time to do some tryouts with i3 lite.

The scanner seems to be working perfect. It is important that the domintell DETH02 is correctly set-up:

- checkbox on timout should be checked!

This was the problem with my second eth02 module.

I've planned to do some more tests in the upcoming week.

Kind regards,

Wouter

Hi,

Last month we have tester and ran a setup with i3pro , 2n and  raspbx. Works fine except for image quality. 

Make sure that your pbx sip serveronly uses the richt codecs with richt prioriteit. See chan_sip settings. Also your proxy setting neef to be correct for your network. Have screenshots?

Kind regards,

Wouter Verbeeck

I get both.

On one deth02 module I have a server running. On the other one I can't connect

small question:

when using sip server, did you also have trouble getting the sip image quality to a decent level?

We have troubles getting the sip image to a quality image and can't seem to find a solution.

This is little off-topic, but we had to create a work-around.

I'm looking forward to your developpement.

best regards,

Wouter

Hi,

this is very good news for us too.

Nice job!

I hope you get it to work. Keep us posted!.

Kind regards,

Wouter V