Modules

On this forum you can discuss iRidium modules with other users. Please post here your questions, ideas or errors you find.

0
Completed
Xopyc (expert) 9 months ago in HDL Buspro / HDL DLP Panel (AC, FC) • updated 9 months ago 1


HDL DLP Panel (Air Conditioner, Floor Heating)


Type: Panel

Developer: iRidium mobile

Manufacturer: HDL


The module enables control of DLP Panel (with air conditioner and floor heating control) devices in the HDL Buspro bus with manual input of parameters. The HDL scanner can be used for automatic search of HDL Buspro devices. Also the scanner downloads and installs modules for required devices without requesting parameters.The module works by the HDL Buspro protocol.


Functions:

  • Power control;
  • Mode control for air conditioner (available modes: auto, fan, heat, cool);
  • Mode control for floor heating (available modes: normal, day, night, away, timer);
  • Temperature control;
  • Fan speed control (only for air conditioner).

Sets of Actions, Events, Conditions enables use of all module functions in macros and scenes (routines).


Actions:

  1. Turn on - to turn on the air conditioner or floor heating;
  2. Turn off - to turn off the air conditioner or floor heating;
  3. Set mode - to set the selected mode for the air conditioner or floor heating;
  4. Set temperature - to set the desired temperature for the air conditioner or floor heating (air conditiner allows to set temperature only for a selected mode);
  5. Set fan speed - to set the selected fan speed for the air conditioner.

Events:

  1. On - the air conditioner or floor heating had just been turned on;
  2. Off - the air conditioner or floor heating had just been turned off;
  3. Temperature rises above - temperature has become higher than the indicated value;
  4. Temperature drops below - temperature has become lower than the indicated value;
  5. Mode has changed to - mode has changed to the selected value;
  6. Fan speed has changed to - fan speed has changed to the selected value (only for air conditioner).

Conditions:

  1. On - the air conditioner or floor heating is on;
  2. Off - the air conditioner or floor heating is off;
  3. Temperature is above - temperature is higher than the indicated value;
  4. Temperature is below - temperature is lower than the indicated value;
  5. Mode has changed to - mode is set up to the selected value;
  6. Fan speed has changed to - fan speed is set up to the selected value (only for air conditioner).