iRidium Pro. Change Log

RU: история версий iRidium Pro на русском языке

16/07/2025 iRidi Setup 1.3.80.42256

Studio (2.0.70.42256)

Bus77 Project:

I-CAN-MODBUS. Profile 8 (VAKIO): Added configuration and control capabilities for ventilation systems.
RGB Dimmer: Added color control from scenarious and schedules.
TW Dimmer: Added auto-turn-on for the dimmer when changing color temperature from a scenario.
Added detection of devices without firmware or offline.
Added automatic TCP port detection for control devices.
Added linking between a motorized curtain and a button/schedule: for opening/closing and changing the operating mode.
Unified wording for actions in schedules.
Removed automatic link creation between a script and the master switch.
Fixed crash when power is reapplied with the device settings popup open.
Fixed recovery after replacing a faulty device.
Fixed duplication of schedules after restoring from an "Error" state.
Fixed time recovery after replacing a faulty device.
Fixed schedule editing for Curtains.
Fixed action recovery in scripts for Leak Sensors.
Fixed action recovery in scripts for I-CAN-DALI-L1.
Fixed time display when opening projects.
Fixed freezing of the scanning popup when adding a previously configured CAN-DALI gateway.
Onokom: Bug fixes

Server project:

Added a new subdevice "VAKIO Ventilation" in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut.

Client (1.3.80.42256)

I-CAN-Modbus Gateway: Added support for VAKIO ventilation units.

08/07/2025 iRidi Setup 1.3.79.3.41948

Studio (2.0.69.41948)

Errors are fixed.

04/07/2025 iRidi Setup 1.3.79.2:41941

Studio (2.0.68.41941)

Errors are fixed.

02/07/2025 iRidi Setup 1.3.79.1:41934

Studio (2.0.67.41934)

Errors are fixed.

18/06/2025 iRidi Setup 1.3.79:41920

Client (1.3.79:41920)

Drivers:

Added support for the I-PX-IR3 Ethernet converter driver with 3 independent IR channels
Domintell. Added support for the 8-channel monopolar relay board DMR02.
Added support for the DigiSyntetic driver.
Added support for the Philips HUE driver.
Fixed register duplication issues in Modbus TCP Slave operation
Visca Over IP. Corrected feedback processing for multi-driver projects using Visca Over IP

Android (1.3.79:41920)

Android. Added warning message display when required app permissions are missing.

Server (1.3.79:41920)

HS Server. ProAV Control Processor. Added custom NTP server configuration via web interface
RPI. Resolved web-interface server update issues

Drivers:

Added support for the I-PX-IR3 Ethernet converter driver with 3 independent IR channels
Domintell. Added support for the 8-channel monopolar relay board DMR02.
Added support for the DigiSyntetic driver.
Added support for the Philips HUE driver.
Fixed register duplication issues in Modbus TCP Slave operation
Visca Over IP. Corrected feedback processing for multi-driver projects using Visca Over IP
Added an integration module for the external "AUVIX Pack" driver package with JSON-based import capability.

Studio (2.0.66.41920)

KNX Smart Import. Fixed the display of added/removed addresses when importing from ETS.
Hotkeys. Fixed functionality issues. link
Added the Collapse/Expand All buttons for tree lists.
Implemented project name display in the studio window title.
Fixed a crash when saving after project merging.
Fixed a crash during project synchronization.
Added functionality to save the position of all pop-ups and workspace splitters.
Expanded IR code database for iRidi devices: ProAV Control Processor, AV Remote Control, I-PX-IR3.

Scripts:

JS Editor. Fixed text scaling issue when using Ctrl + Scroll.

Drivers:

I-PX-IR3. Implemented the I-PX-IR3 Ethernet converter driver with 3 independent IR channels.
IR Learning. Added support for learning via I-PX-IR3 devices.
AV Remote Control. Touch Panel P3. Added the Key Programming tool for configuring physical button triggers.
AV Remote Control. Touch Panel P3. Added a quick setup tool for assigning a server project.
Domintell. Added support for the 8-channel monopolar relay board DMR02.

Panel project:

WorkSpace. Implemented functionality to open pages and popups in separate workspace tabs.
WorkSpace.Fixed the relation counter for graphical items.
Added text rotation capability for graphical items.
Synchronized "All States" values for text blocks between Properties panel and Text Editor window.
Fixed an issue with macro movement between programming window tabs.

Server project:

Fixed the addition of inputs for the Interlock block-schemes.
iRidi Server. Fixed server cyclic synchronization
Routines. Fixed the parameter name in the Then tab of the routine creation window.
Implemented a restriction mechanism preventing the use of iRidi Server tokens in Virtual driver command and feedback names

16/05/2025 iRidi Setup 1.3.77.41198

Server (1.3.78.41205)

Improved application performance and reduced PROCESSOR load by optimizing code, which ensures smoother operation and saves system resources.
Fixed an error that causes the server to reboot after updating the project.
The use of tokens for monitoring the status of servers has been optimized in order to increase system stability

21/04/2025 iRidi Setup 1.3.77.41198

Client (1.3.77.41198)

License. The incorrect recognition of the error response from the cloud when requesting a license is fixed.

Studio (2.0.65.41198)

Server project:

Routines. The errors saving schedules in "But Only If" are fixed.

Bus77 Project:

Fixed triggering of the connection when it is modified

16/04/2025 iRidium Setup 1.3.76.1.41185

Studio (2.0.64.41185)

Bus77 Project:

Added "Schedule" mode for Thermostat.
Improved scheduling functionality for Dimmer, RGB Dimmer, and Voltage Regulator.
Optimized UX of the Master Button relation settings
Changed value update animation in settings
Fixed a firmware update issue for the Master Button
Fixed an infinite connection loop when closing a project with an active search query
The error of updating values in scenes is fixe

Server and Panel project:

Fixed a sync issue between panel and server projects when renaming devices/subdevices in a .bus77 project.
Fixed a bug causing deselection of multiple items when moving elements in the device tree.

Server project:

The error that caused the system database settings to be reset when synchronizing with the bus77 driver in the server project is fixed

02/04/2025 iRidium Setup 1.3.76.0.41081

Studio (2.0.63.41079)

An error with displaying the Event tab in the main menu is fixed.

31/03/2025 iRidium Setup 1.3.76.41079

Client (1.3.76.41079)

Added support for the Touch Panel P3 platform.
BlurDepth Effect. Synchronized blur intensity in the application on Windows and iOS.
License. Improved handling of license receiving errors.

Drivers:

ODBC. Implemented methods for working with Cyrillic characters.
AV&CS HTTP. Fixed data loss during repeated sending with Digest authentication.
AV&CS HTTP. Fixed header case sensitivity preservation
Yealink. Added commands for controlling additional remote buttons.
Added a driver for the Intrend video switching equipment.
Lutron (LEAP). Increased the value passed to ID Area.

Android (1.3.76.41079)

AV-R. Fixed the functionality of the Back button.

Server (1.3.76.41079)

Improved synchronization between transport streams and drivers to enhance server stability.
Tokens. Implemented a set of tokens for monitoring server status and integration with iRidi SCADA.
License. Improved handling of license receiving errors.
Fixed saving a tag’s zero value to the database.
Added support for loading custom SSL certificates for Secure Connection (HTTPS) to the web interface.

Drivers:

MS EWS. Fixed request freezing during CallBack function execution

Studio (2.0.62.41079)

Drivers:

Yealink. Added commands for controlling additional remote buttons.
Z-Wave.me. Fixed an issue with feedback settings reset when modifying command settings.

Panel project

Programming. Added a relation to the Limit parameter for the Up/Down Button item to edit limit values.

Server project

Script Modifier. Fixed the import of server projects where Script Modifier is assigned.
Schedule. Fixed the simple schedule configuration to display the scheduled execution date.

Bus77 project:

The logic of the Reset Alarm button for Thermostats in Error Mode has been changed.
Fixed the data receiving mechanism for connection establishment and recovery.

10/03/2025 iRidium Setup 1.3.75.40781

Client (1.3.75.40781)

I-CAN-MODBUS. Onokom. A possibility to configure and control air conditioners is added.
A new subdevice "Thermostat with AC" is added in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut
Line Chart. The "object is not callable" error is fixed when using SetCurveTag method.

iOS (1.3.75:40760)

-URL schemes. A call error on iOS is fixed.

Studio (2.0.61.40781)

Bus77 Project:

I-CAN-MODBUS. Onokom. A possibility to configure and control air conditioners is added.
Thermostat. A possibility to keep the temperature in the specified range is added.
Touch screen thermostat. Configuration and control of the thermostat touch panel are added.
Relay. The channel for setting up automatic relay switching is added.

Server and Panel project:

A possibility to scroll the device tree when moving items using the Up/Down buttons is added.

Server project

A new subdevice "Thermostat with AC" is added in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut
The error of missing previously configured relations in projects with the Bus77 driver is fixed

20/02/2025 iRidium Setup 1.3.74.0.40531

Studio (2.0.60.40531)

Server project

Routines. An error with saving routines in a server project is fixed.
Routines. An error with moving commands in the routines editing window is fixed.

18/02/2025 iRidium Setup 1.3.74.40523

Client (1.3.74.40522)

The bug with automatic focus on the EditBox item is fixed

04/02/2025 iRidium Setup 1.3.73.40515

Client (1.3.73.40515)

Line Chart. The ability to view the value at a selected point on the item's curve is added.
Adaptation of the client for devices with small screens is added.
Navigation of buttons and hotkeys in the project is fixed.
Stability of i3Pro client connection via iRidi Cloud Gate is improved.

Drivers

Microsoft Exchange. New version of the native Microsoft Exchange Web Services (EWS) driver is added.
Modbus TCP Network. The error of receiving data in the feedback of the Single poll mode for the Modbus TCP Network driver is fixed.
Lutron Homeworks QS. Temperature deviation parameters are added to the Get/set single setpoint driver command.

Server (1.3.73.40515)

Support for the Wiren Board 8.4 platform is added.
The error of saving status of edited schedules is fixed.
Serial transport version for KNX driver is updated

Scripts

The error of outputting XML objects to the server log is fixed.

Drivers

Microsoft Exchange. New version of the native Microsoft Exchange Web Services (EWS) driver is added.
Modbus TCP Network. The error of receiving data in the feedback of the Single poll mode for the Modbus TCP Network driver is fixed.
Lutron Homeworks QS. Temperature deviation parameters are added to the Get/set single setpoint driver command.
Yandex Alice Platform. Limiting log output for the driver.

Studio (2.0.59.40515)

AMXProject. A studio crash is fixed when opening a TP5 format project.

Drivers

Limit for creating driver feedbacks and tokens of the same name is added.
Error with obtaining SSL certificates in HTTP drivers when starting the emulator is fixed.

Scripts

Layout of quick action buttons panel in the Script Editor window is fixed.

Panel project

Programming. The localization package for the new Programming tab is updated.
Programming. The ability to go to an object through a relation/macro in the Programming tab is added.
Navigating around the workspace using the "Hand" cursor is improved.
Shifting of the workspace when resizing the popup beyond the page boundary is fixed.
The error of saving colors to the project palette is fixed.
The typo in the name of the graphic items parameter is fixed.

Server project

Routines: the error of the empty line in the Feedback column after deleting the associated channel is fixed.
Schedule. In the advanced schedule, the name of the "End of repetition" item is corrected.
Schemes. The size of blocks of the "From Channel", "To Channel", "From Tag" and "To Tag" type is fixed.
Schemes. The error when transfering block schemes to XML of a panel project when merging a server project is fixed.

Bus77 Project:

The error of reflashing a device with the same profile and firmware version is fixed.
A studio crash is fixed when replacing a faulty device by clicking the "Replace device" button.
The error of displaying a popup when replacing a faulty device is fixed.
A studio crash is fixed when reading a device after flashing to replace the faulty device.
DM-1400. The error of displaying subdevices when changing the type is fixed.

18/12/2024 iRidium Setup 1.3.71.1.40074

Studio (2.0.58.40074)

Bus77 Project:

I-CAN-DALI. The ability to broadcast on/off devices on the line is added;
Leakage sensor. Scenarios and relations with Relay and LED are added;
Button. The "Locked Button" mode is added;
Thermostat. Silent mode is supported;
The function of replacing a faulty device is added;
Errors are fixed.

Server and Panel project:

Bus77 driver. The ability to hide subdevices is added.

Panel project:

The error related to moving macros using arrows when programming items is fixed.

27/11/2024 iRidium Setup 1.3.71.0.39753

Client (1.3.71.39753)

The i3 Pro application has been rebranded.
Routines. Custom translation of the page interface for editing routines is added.
The error of receiving the device orientation system token is fixed.

Drivers:

Support of the Casambi driver is added.
Support of the Televic Conference (Secured API) driver is added.
Support of the driver for the WiiM Pro network players is added.
Optimizing and speeding up processing queue of the serial port query.

Android (1.3.71.39753)

AV Remote Control. The ability to control the base station backlight from the system menu is added.
AV Remote Control. The i3 Pro app restart when KIOSK Mode running is fixed.

Server (1.3.71.39753)

The iRidi Server application has been rebranded.
AV&Custom Systems (SSH). The parameter for reconnection interval in case of long response from equipment is added.

Studio (2.0.57.39753)

A vulnerability in project protection is fixed. Since version 1.3.71, it is recommended to update the password for project editing access (Project setting -> Passwords -> Change password).
The iRidi Studio application has been rebranded.
The error that caused the application to freeze when synchronizing projects is fixed.
The error that caused items to disappear into external code editors when drag&dropping is fixed.
The problem with moving in the tree using keys is solved.
The problem when sorting with expanded search in windows is solved.

Panel project:

Trigger Button. The ability to change state from the "Channel only" feedback is added.
The error with moving internal windows when deleting a graphic item is fixed.
Programming. The error with the "Delete all links and commands" from the graphic item functionality is fixed.
Programming. The problem when copying relations between items is solved.

Drivers:

MyHome Network (Beta). The error of displaying the A, PL parameters when changing the Type parameter is fixed.
The error of copying devices from the network to the tree is fixed.
The error of numbering in subdevice names when copying is fixed.
The error when channels can't be drag&dropped from the device tree is fixed.

7/11/2024 iRidium Setup 1.3.70.1.39360

Server (1.3.70.39360)

Bugs fixed

30/10/2024 iRidium Setup 1.3.70.0.39357

Client (1.3.70.39357)

A new graphic item is added: Line Chart. link
Ability to set negative values relative to sunset/sunrise when editing schedules is added.

Scripts:

Work of image indent parameters when cloning graphic items is fixed.

Drivers:

BacNet: driver stability when sending the ReadProperty requests is improved.
Domintell. Equipment reconnection errors are fixed.
Yamaha Network. Ability to control the "tv" input is added.

Project menu:

Work of the SCAN QR-CODE button is fixed.

Android (1.3.70:39357)

The lowest supported version of Android is changed from 4.4 to 5.0

Server (1.3.70.39357)

Support of the IEEE 802.1x access control and authentication protocol is added to the ProAV Control Processor hardware platforms.
Logging of authorization events to the iRidi Server web interface with offline licensing is added.
System for auto-cleaning logs is implemented. link

Drivers:

BacNet: driver stability when sending the ReadProperty requests is improved.
Domintell. Equipment reconnection errors are fixed.
Yamaha Network. Ability to control the "tv" input is added.

Studio (2.0.56.39357)

The search and display of tree items in the device panel is fixed.

Panel project:

A new graphic item is added: Line Chart.

Server project:

A tool for quickly assigning the Bus77 driver and devices to the Alice voice assistant (Yandex Alice Platform) is added.

Scripts:

Work with external script editors is improved.

Drivers:

Ability to update the Source ETS Project file in existing KNX IP Router drivers is added.
The Synchronization button is removed from the context menu of the iRidium Server driver if there is no project file in the Source Project parameter.
Movement of channels between subdevices of the ProAV Control Processor, AV Remote Control and DigiBird UniManager drivers is limited.
Copying channels to the device tree area from AV & Custom TCP/UDP Network and AV & Custom HTTP Network is limited.
Movement of subdevices within the ProAV Control Processor, AV Remote Control and Digibird UniManager networks is fixed.

8/10/2024 iRidium Setup 1.3.69.0.38442

Client (1.3.69.38442)

I-CAN-Modbus gateway. Support of the Royal Clima ventilation units of the SOFFIO PRIMO model range is added

Studio (2.0.55.38442)

Bus77 Project:

I-CAN-Modbus gateway. Support of the Royal Clima ventilation units of the SOFFIO PRIMO model range is added
Support of light alarm clock functionality is added for TW Dimmer
Errors are fixed

Server project:

A new sub-device "Royal Klima Ventilation" is added for voice assistants:
- Yandex Alice Platform
- VK Marusya
- Sber Salut

16/09/2024 iRidium Setup 1.3.68.0.38344

Client (1.3.68.38344)

Support for I-CAN-Modbus gateway.
The Minibox ventilation system with Zentec automation. Support for a new sub-device has been added to the I-CAN-Modbus: Zentec M100 air handling unit.
Hisense air conditioners. Support for a new subdevice has been added to I-CAN-Modbus: Hisense air conditioner through B544(E) adapter.

Studio (2.0.54.38344)

Bus77 project:

Support for I-CAN-Modbus gateway.
The Minibox ventilation system with Zentec automation. Support for a new sub-device has been added to the I-CAN-Modbus: Zentec M100 air handling unit.
Hisense air conditioners. Support for a new subdevice has been added to I-CAN-Modbus: Hisense air conditioner through B544(E) adapter.
Bug fixes

Server project:

Added a new “Ventilation” sub-device in voice assistants:
- Yandex Alice Platform
- VK Marusya
- Sber Salut

31/07/2024 iRidium Setup 1.3.67.0.38221

Client (1.3.67.38221)

JavaScript:

ToTimeString() and ToDateString() methods for the iDate class are implemented. link

Drivers:

Bus77 driver. The "Frequency of line requesting" parameter for prompt display of the Online/Offline statuses of devices in projects is added. link
Stability of the Global Cache driver is improved

Android (1.3.67.38184)

The amount of information displayed in Push notifications is increased

Server (1.3.67.38221)

JavaScript:

ToTimeString() and ToDateString() methods for the iDate class are implemented.link

Drivers:

Bus77 driver. The "Frequency of line requesting" parameter for prompt display of the Online/Offline statuses of devices in projects is added.
Digibird. iRidium Server integration on UniManager-B Control Processor (Digibird) is implemented. link
Digibird. The IR.EVENT_RECEIVE_TEXT, IR.EVENT_RECEIVE_DATA function using the Subdevice pointer of the driver on UniManager-B Control Processor (Digibird) are implemented. link
Stability of the Global Cache driver is improved
Yandex Alice. Different dimmer options to the Yandex Alice Platform driver are added.

Offline licensing:

Offline License. Web interface for downloading projects and estimating free storage space is fixed.

Studio (2.0.53.38221)

Delay. Units of measure are added to delay in server project routines and panel project programming. link

JavaScript editor:

ToTimeString() and ToDateString() methods for the iDate class are implemented.

Panel project:

Programming. Panel project. New view of the Programming tab: the length of the connection is shorter
Programming. Saving the focus of the selected parameter when opening macro editing is fixed.
Programming. When you copy a connection or macro from one item to another, the link to the original item is replaced by a link to the new one
Fonts. A problem with adding fonts which family name does not match the main name is fixed.
Fonts. The font is automatically highlighted when focus is placed on the field, scrolled through with arrows and searched for by typing.
Fonts. The "Delete" option for fonts used in the project is hedden from the context menu.

Server project:

Virtual. A tool for mass creation of virtual feedback with the ability to automatically link commands in the Devices>Virtual tab is added

Bus77 project:

Bus77 driver. The "Frequency of line requesting" parameter for prompt display of the Online/Offline statuses of devices in projects is added.
Fixed the appearance of duplicate events in schedules after flashing the device.

23/07/2024 iRidium Setup 1.3.66.1.37613

Studio (2.0.53.37613)

Bus77 project:

Support for the I-CAN-DALI-L1 gateway has been added
- Broadcast button
- Support for 127 iRidi scenarios
The project storage format has been changed from *.irb77 to *.b77.

25/06/2024 iRidium Setup 1.3.66.1.37567

Studio (2.0.53.37562)

Bus77 project:

Support for OCS leak sensors (FS-WT-OCS-BIF, FS-WT-OCS-OTF)
Bugs fixed

06/06/2024 iRidium Setup 1.3.66.0.37494

Client (1.3.66.37494)

Bus77:

Added support for devices with 127 scenarios, new interface for scenario configuration link
Added support for devices with improved button functionality link

Server (1.3.66.37494)

Bus77:

Added support for devices with 127 scenarios, new interface for scenario configuration link
Added support for devices with improved button functionality link

Studio (2.0.52.37494)

Bus77 project:

Added support for devices with 127 scenarios, new interface for scenario configuration link
Added support for devices with improved button functionality link

17/04/2024 iRidium Setup 1.3.65.0.37309

Client (1.3.65.37309)

Drivers:

Sonos. The connection between the driver and the equipment is restored

Server (1.3.65.37309)

Drivers:

Yandex Alice. Stability of connection to the cloud service during periods of increased load is increased

Studio (2.0.50.37309)

Bus77 project:

TW dimmer. New subdevice is added: TW dimmer
FS-BT6-OLED. New sub-device FS-BT6-OLED (Thermostat Screen) is added
Curtains. Support for phase and pulse control is added
Voltage regulator. Control from Bus77 buttons and sensors is added
UMC. Function for automatic sockets closing while working with a line is added
Process of flashing devices that leads to errors during flashing (disabling ping and second connection) is fixed
Warning popups about the need to update the firmware and about the impossibility of updating the firmware is added

10/04/2024 iRidium Setup 1.3.64.0.37089

Client (1.3.64.37089)

Drivers:

SIP. SIP client connection via Linphone SIP Service to make audio/video calls is configured
SIP. Video communication with the Akuvox panel is improved: for transmitting a video stream and when making video calls

Server (1.3.64.37089)

Drivers:

AV & Custom System (WebSocket). Passing values when using the Headers parameter is fixed. Now, when adding the Headers parameter, the logic for sending data will not break
Modbus RTU. The Modbus RTU driver, TCP Gate protocol, for the HSS server is improved. Now the HSS server will be able to receive data from Modbus devices
Domintell. The Domintell driver for the DISM20 module is improved. Now the DISM20 channel addresses will be read in full and in the correct order

Offline licensing:

Offline License. The encryption method for the client-server connection to increase the level of data security is changed

Studio (2.0.49.37089)

Drivers:

KNX. The scene numbering has been changed in accordance with ETS5 (from 1 to 64) and now there is no need to match the numbers when working in iRidium Studio
iRidium Server. Remote Cloud Control connection type was renamed to Direct & Remote Cloud Control for greater information content
AV Remote Control / ProAV Control Processor. New Data type for the IR subdevice - “Pronto Hex” is added. It allows you to configure the type of data used, IR.Hex or Pronto Hex.
Virtual. Back copying of Commands and Feedbacks from the Virtual driver between projects is added. That will help you to create new projects based on old ones

Panel project:

Master Project. It is no longer possible to create a new master project, you can only edit previously created ones
Relations. Creation of a connection to the state of the Trend / Bar Chart / Pie Chart elements to avoid critical errors is removed
Automatic selection of a text field by transition with "Tab" is removed

Web-panel (1.0.10.0)

Drivers:

iRidium server. On the server web interface, in the iRidium server driver parameters, new counters “Virtual Channels”, “Virtual Tags”, “All channels” and “All Tags” is added. That will help to form an understanding of the number of tags in the project without returning to editing in iRidium Studio and quickly form an understanding of license costs

05/03/2024 iRidium Setup 1.3.63.0.36872

Client (1.3.63.36872)

Features:

When downloading a project from the cloud, the application interface is not blocked

Drivers:

Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added
ITC. Driver for managing ITC conference system controllers is added
AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added
MyHome. Command formation when using single digit numbers in A-PL settings is fixed

Mac OSx (1.3.63.36868)

Window scaling bug in i3Pro application is fixed

Server (1.3.63.36872)

Features:

Ability to update iRidium Server application for the EU region is implemented
Web interface. A checkbox for disabling SSH access to the device on iRidi hardware platforms
Web interface. The page header now displays the current OS version and microcontroller firmware on ProAV Control Processor Basic and ProAV Control Processor Advanced devices

Drivers:

Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added
ITC. Driver for managing ITC conference system controllers is added
AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added
MyHome. Command formation when using single digit numbers in A-PL settings is fixed
KNX Router (KNXnet/IP) / Serial. The "KNX IP Gateway" setting to enable KNX gateway mode (to replace the script) on platforms: HSS, AV Processor and UMC
AV & Custom System (Serial). Added Delimiter, Packet length, Interval time settings for filtering and shaping of incoming data

Offline licensing:

Changes have been made within the framework of information security: the ability to use Transfer has been disabled, unnecessary HTTP traffic has been excluded

Studio (2.0.48.36872)

FBD: For Logic AND, Logic OR, Bin AND, Bin OR blocks, the number of inputs/outputs is expanded to 16
FBD: "Interlock" and "Multiple NOT" blocks with the ability to create up to 16 inputs and outputs is added

Features:

The list of prohibited characters for use in names is expanded. Slash symbol '/' is added.

Drivers:

Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added
ITC. Driver for managing ITC conference system controllers is added
AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added
MyHome. Command formation when using single digit numbers in A-PL settings is fixed

07/02/2024 iRidium Setup 1.3.62.0.36281

Client (1.3.62.36281)

Navigation and interaction with items in the project interface with the help of hotkey combination on Windows are improved
The system of project autoupdate from the cloud is improved: a notification popup about the new version of the project, a window with the update progress and a notification window about completion of the update are added

Drivers:

AVCiT. The ability to select video codec when switching a video signal source is added
Bus77. Thermostat. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetState and ThState = State, SetStatePID and ThStatePID = StatePID
Bus77. Blinds. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetPosition = Position
KNX Router Serial. The "ACK all telegrams" parameter for turning on the ACK response function from the server to all incoming telegrams from the KNX bus is added
Domintell. Support of the "DIN10V02" analog input module subdevice is added
Yealink. Support of the driver to control "Yealink meeting eye 600" is added
Yeelight. Support of the driver to control "Yeelight Pro S20 Mesh" is added

Android (1.3.62:36245)

Support of navigation and interaction with items in the project interface using hardware keys of the AV-R device is added
The ability to intercept keystrokes on the AV-R device for use in a project is implemented

System menu:

The setting of turning on/off the "Lift to wake" function is added for the AV-R device, this function controls automatic unlocking the device when it is picked up

Server (1.3.62.36281)

AV Processor PX-VP100 (Advanced). The ability to scan devices from both Bus77 buses in iRidium Studio is added
Support of Cyrillic characters in the path to the server documents folder, which could lead to the impossibility of starting the server is added
The ability to use server events for tracking sunrise and sunset in scripts and project tokens is added
The frequency of launching schedules on the server, which could lead to the schedule being disabled is fixed

Drivers:

AVCiT. The ability to select video codec when switching a video signal source is added
Bus77. Thermostat. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetState and ThState = State, SetStatePID and ThStatePID = StatePID
Bus77. Blinds. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetPosition = Position
KNX Router Serial. The "ACK all telegrams" parameter for turning on the ACK response function from the server to all incoming telegrams from the KNX bus is added
Domintell. Support of the "DIN10V02" analog input module subdevice is added
Yealink. Support of the driver to control "Yealink meeting eye 600" is added
Yeelight. Support of the driver to control "Yeelight Pro S20 Mesh" is added

Studio (2.0.47.36281)

Universal import. Setting of Comunity control channel when importing SNMP driver is added

Drivers:

Network drivers. The FullName parameter in the settings of control channels and feedback channels, displaying the full name of the channel with subdevices is added

JavaScript editor:

Setting of the external script editor is moved to the Script tab in the iRidium Studio settings
Search for all scripts, including closed, case-insensitive ones is implemented
System of group password protection/removal of scripts is implemented

Panel project

When changing the coordinates of a group of graphic items, relative positions between them are saved

Server project

The SunRise and SunSet tokens with the help of which you can get the time of sunrise and sunset for the current coordinates are added
Routines. Adding a new condition or action below the highlighted line, not at the end of the block
Scheme editor. The ability to select the String data type in the IF(SEL) block is added

Bus77 project:

The ability to scan both Bus77 lines connected to one AV Processor PX-VP100 (Advanced) is added
Valve. The "Tap controlled contacts" setting is added
Curtains/shutters. The "Stop" button and the "Control is blocked" state are added
Light sensor. After reflashing the device, the calibration value of the sensor is restored

22/12/2023 iRidium Setup 1.3.61.0.35556

Studio (2.0.46.35556)

Bugs fixed

15/12/2023 iRidium Setup 1.3.61.0.35551

Client i3 Pro (1.3.61.35551)

Bugs fixed

13/12/2023 iRidium Setup 1.3.60.0.35545

Studio (1.3.60.35545)

Drivers

HDL Buspro Network. The Dry Contact 51Z subdevice is added link
Import from CSV files. At the next import settings of the channels which are already added will be renewed if the names of the channels are the same

Panel project

The tool for adapting images to the item size to remove "the ladder" when showing in i3 Pro is added
Workspace. Switching to the «Hand» (dragging) mode with the help of the «Spacebar» hot key is added
Highlighting the content of the box when navigating in Tab in the tabs of item properties, commands and drivers is added
The remote control «AV-R» when selecting the project resolution is added
An image can be dragged from Gallery without highlighting it first
Static list. The following settings are added: HIT, ScrollBar (deactivation of scrolling the list of popups), End Indent (space from the bottom edge to the last popup)

Server project

The «DB» tab is added for summary analysis of all tags written in the database

JS editor

Editor workspace focus retention when switching between multiple projects is added
Ability to download several ready-made JS files simultaneously is added

Bus77 project:

CO2 Sensor. Ability to configure the connection “When the CO2 norm is exceeded” with relays and binary indicators is added
Dimmer. Ability to create an On/Off dimmer connection with a master button is added
Thermostat. Settings for upper and lower temperature limits for modes is added
Restoring device mechanism configuration in case of unsuccessful firmware and after resetting the device updated
Сolor contrast between online and offline devices for easier identification increased
Sorting in the device tree occurs by the channel number on the device, and not alphabetically
The “+” button for adding events is no longer hidden, when changing the width of the “Connections” tab
Update of the gateway IP address in the project after clicking on the “Find device” button is added

Client i3 Pro (1.3.60.35545)

For the debugging convenience messages about the end of the license validity period is shown not more frequently than once in a second

Graphic items

ITEM_PICKER. The Position parameter is added. It enables receipt of the current position of the first visual item of the drum link

Drivers

HDL Buspro Network. Codes for controlling the light temperature when working with the HDL/DALI gateway are added
Kramer 3000. Support of the driver is implemented
Lutron Homeworks QS. The OUTPUT link and HVAC link commands are added
MyHome Network (Beta). The range of values for A and Pl parameters is extended which widens the range of control devices link
SIP. The Preview status is added when using the Preview Mode
URRI. Support of the driver is implemented
HTTP. Digest authentication is improved: support of "qop" is added

JavaScript

In the IR.HideAllPopup() method you can inicate the animation you want to use when closing a group of popups link
Functionality of the IR.IsModuleLicensed() method is extended to check if there is support of the AV&Custom System driver in the license when implementing custom drivers on the basis of AV&Custom System link

Server (1.3.60.35545)

Drivers

Google home. Support of the Curtain subdevice is added link
HDL Buspro Network. Codes for controlling the light temperature when working with the HDL/DALI gateway are added
Kramer 3000. Support of the driver is implemented
Legrand Netatmo. Support of the driver is implemented link
Lutron Homeworks QS. The OUTPUT link and HVAC link commands are added
MyHome Network (Beta). The range of values for A and Pl parameters is extended which widens the range of control devices link
URRI. Support of the driver is implemented
Yandex Alice Platform. Possibility to stop the curtains with the comand «Pause the curtains» and the «Pause»feedback channel for monitoring the curtains are added
ZONT. Support of the driver is implemented link
HTTP.Enhanced Digest Authentication has been implemented, with support for the qop parameter

18/10/2023 iRidium Setup 1.3.59.0.34184

Client (1.3.59.34184)

Licensing

The possibility to select Offline licence mode for objects without internet access is added link

Server (1.3.59.34184)

Licensing

Licensing. The possibility to select Offline licence mode for objects without internet access is added link

Web-interface

The possibility to select a local file to update the server if the link update is not available is added link

Offline licensing

The possibility to deactivate the server via the web-interface is added link
The delay mechanism between attempts to enter PIN and PUK codes to prevent quick blocking of the web-interface as a result of unsuccessful attempts is added link

11/10/2023 iRidium Setup 1.3.58.0.33856

iRidium Studio 2019 (2.0.43.33856)

Bus77 проект:

Assignment of individual device identifiers (LIDs) during scanning is fixed

26/09/2023 iRidium Setup 1.3.58.0.33844

iRidium Studio 2019 (2.0.43.33844)

Drivers:

Displaying of parameters of Modbus Network driver is fixed

21/09/2023 iRidium Setup 1.3.58.0.33839

iRidium Studio 2019 (2.0.43.33839)

Bus77 project:

The setting for calibration of the Leak Sensor is added link

18/09/2023 iRidium Setup 1.3.58.0.33811

iRidium Studio 2019 (2.0.43.33811)

Drivers:

AV & Custom Systems. Ability to copy and paste commands and feedback between AV drivers is added
BlueSound. Additional index parameter for inputs is added
Bus77 Network. Saving Bus77 driver parameters when synchronizing with the Bus77 project is implemented
HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added link
Helvar NET. Ability to create a driver from a CSV file uploaded from the Designer application is added link

Panel project:

When you select a page or popup in the Projects tree, all commands and feedbacks used on them in the Devices tree are highlighted
Alignment of elements relative to one element / group of elements, selected last with Ctrl (requires enabling in settings) is added link
Ability to select preset project resolutions for iRidi panels (P6, P8, P10) is added

Server project:

Routines. Saving the width of the columns inside the Routine between openings is added
Routines. Bus77 Network. Ability to use the events of the Bus77 driver in conditions is added (for example, by double tapping Bus77 button, turn on KNX lamp) link

Bus77 project:

Support for customizing the HSV indicator (RASIM and COURTIER devices) is added link
Arrows for moving Bus77 devices to change the sorting of devices in the tree is added
By default, the Device tree in the "Connections and Logic" tab and in the "Connections" window is collapsed to the device level
The Studio stops polling the Bus77 bus when switching to another project
Thermostat. Manual selection of the "Error" mode is blocked, now it will only appear with a real error from the device
FM-808. The behavior at start can be either «On» or «Off» only
Global scenes. Minor changes are made

Client (1.3.58.33811)

Drivers:

HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added link

Items:

Editbox. The error of showing the cursor on the wrong (not highlighted) line is fixed

Server (1.3.58.33811)

Drivers:

BlueSound. The parameter of setting up commands for selecting the number of the input on the device (Index) is added link
HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added link
Yandex Alice Platform. The support of the "Alice for Hotels" add-on enabling binding of up to 25 different accounts to 1 server project is added link

Web interface:

The Connect / Disconnect button for drivers in the "Drivers" tab is added link
The possibility to update the iRidium Server application by the redirect link from the iRidi web site is added

22/08/2023 iRidium Setup 1.3.57.0.33241

iRidium Studio 2019 (2.0.42.33241)

Support of ProAV Control Processor (PX-VP100-Advanced) is added link
Bus77 Network driver. The Keep alive parameter which sets the frequency of checking the connection with the gateway is added link

Client (1.3.57.33241)

Support of ProAV Control Processor (PX-VP100-Advanced) is added link

Server (1.3.57.33241)

Support of ProAV Control Processor (PX-VP100-Advanced) is added link
Bus77 Network driver. The Keep alive parameter which sets the frequency of checking the connection with the gateway is added link

17/07/2023 iRidium Setup 1.3.56.0.33144

iRidium Studio 2019 (2.0.41.33144)

Bus77 project. The "Make Brighter/Darker from 1 Button" link for Dimmers and DALI Dimmers is added link
Server project. An option is added to quickly configure drivers using Serial protocol on iRidi equipment link
Server project. Routines. Saving of column widths when editing rules is added
Drivers. The "AVCiT" driver is added link
Drivers. The "BSS Harman" driver is added link

Client (1.3.56.33144)

Drivers. Support of the "AVCiT" driver is added link
Drivers. Support of the "BSS Harman" driver is added link

Android (1.3.56.33117)

Touch Panel P6. Support of the panel is added
Touch Panel P6 P8 P10. An option is added to change project orientation from system menu

Server (1.3.56.33144)

Drivers. Support of the "AVCiT" driver is added link
Drivers. Support of the "BSS Harman" driver is added link
Drivers. Support of the "ProAV Control Processor" driver is added link
Support of the AV Processor PX-VM20-Basic device is added link
Drivers. AV&Custom System (Serial). Support of the "HRDW Flow Control" for RS-232 on the AV Processor PX-VM20-Basic device is added link
Drivers. Yandex Alice Platform. An option is added to edit the device track range in "Media" devices is added link

20/06/2023 iRidium Setup 1.3.55.0.32640

iRidium Studio 2019 (2.0.40.32640)

Drivers. The Somfy driver is added link
Drivers. Lutron QS Beta. The Set Current Temperature (°C) command is added link
Panel project. The ability to move the workspace left-right with the touchpad is added
Server project. Routines. The saving of the position of the Delay macro in the Then field is fixed
Script Editor. The highlighting of paired brackets after the "/" symbol is fixed
Bus77 project. I-CAN-DALI. The ability to set up connections for groups, without any devices in them yet, is added link
Bus77 project. I-CAN-DALI. The Blink parameter logic is changed link
Bus77 project. I-CAN-DALI. The support of DT8 subdevices is added: TW, RGB, RGBW link
Bus77 project. The schedule settings window for Thermostat, Blinds, Relay is added
Bus77 project. The option to indicate minutes and seconds for the «Shutdown delay» setting of the Movement sensor is added
Bus77 project. The Bus77 mechanism for scanning the bus is improved
Bus77 project. The Date and time column is added to the Firmware window, firmware is sorted by date and organized by firmware profiles

Client (1.3.55.32640)

Drivers. Lutron QS Beta. Support of the "Set Current Temperature (°C)" command is added link
Drivers. BACNet. The "SetSubDeviceParam" and "GetSubDeviceParam" script methods are added link
Drivers. Bus77. Support of the CAN-DALI gateway is added: DT8 control: TW, RGB, RGBW link

Server (1.3.55.32640)

Drivers. Lutron QS Beta. Support of the Set Current Temperature (°C) command is added link
Drivers. BACNet. The SetSubDeviceParam and GetSubDeviceParam script methods are added link
Drivers. Support of the Somfy driver is added link
Drivers. Bus77. Support of the CAN-DALI gateway is added: DT8 control: TW, RGB, RGBW link
Drivers. Bus77. Support of the CAN-DALI gateway is added: display of device and lamp errors link
Drivers. Yandex Alice Platform. Improvements of the service to use sensors in Alice scenes
Database. The ability to activate the automatic cleaning of the database is added link

03/04/2023 iRidium Setup 1.3.54.0.31549

iRidium Studio 2019 (2.0.39.31549)

Panel project. Work with a group of items. Attaching items to guidepath and moving items when holding on any point within the highlighted area link
Panel project. Routines. New macros are added: Edit routine settings (to edit without showing the whole list of routines), Show list of all routines (available for editing) link
Server project. Routines. Search by routines is added
Server project. Routines. General properties for the «Edit from panel» and «Active on server» routines are added
Panel and server projects. Fast jumping to a device in the Bus77 project from the projects which are related to the device by using the RMB link
Bus77 project. Support of the CAN-DALI gateway is added: setting up and control of LED dimmers and groups link
Bus77 project. Support of subdevices is added: Current sensor, Resistance sensor, Voltage sensor, Voltage regulation link
Bus77 project. Movement sensor. Support of minutes (old firmware versions) and seconds (new firmware versions) for the «Shutdown delay» setting is added link
Bus77 project. Movement sensor. Sections are added in the «States» settings: «State for lighting», «Value»

Client (1.3.54.31549)

Drivers. Support of the Vinteo driver is added link
Drivers. Support of the iEAST driver is added link
Routines. New macros are added: Edit routine settings (to edit without showing the whole list of routines), Show list of all routines (available for editing)

Android (1.3.54.31501)

Support Touch Panel P8 is added link

Server (1.3.54.31549)

Drivers. Support of the Vinteo driver is added link
Drivers. Support of the iEAST driver is added link
Drivers. Yandex Alice Platform. Possibility to use sensors in Alice scenes is added link

14/02/2023 iRidium Setup 1.3.53.0.30825

iRidium Studio 2019 (2.0.38.30825)

Bus77 project. The «Relay» subdevice. The «Relay inversion» setting is added link
Bus77 project. The new «Voltage Control» subdevice is added link
Server project. Rules. The button for cancelling all changes in the «Rule» window is added link
Drivers. The WyreStorm driver is added link
Drivers. The Digibird driver is added link
Drivers. The AV & Custom Systems (SSH) driver is added link

Client (1.3.53.30825)

Drivers. Support of the WyreStorm driver is implemented link
Drivers. Support of the Digibird driver is implemented link
Drivers. Support of the AV & Custom Systems (SSH) driver is implemented link

Server (1.3.53.30825)

Drivers. Support of the WyreStorm driver is implemented link
Drivers. Support of the Digibird driver is implemented link
Drivers. Support of the AV & Custom Systems (SSH) driver is implemented link

17/01/2023 iRidium Setup 1.3.52.1.30424

iRidium Studio 2019 (2.0.37.30424)

Bus77 project. The "States" section for subdevices is added. It shows the current state and errors of subdevices. link
Bus77 project. Possibility to calibrate the light sensor is added. link
Bus77 project. Possibility to set up "Master-Slave" for motion sensor is added.link
Bus77 project. List of commands and feedback channels for the "HSV dimmer" subdevice is changed. link
Bus77 project. Automatic scanning of the line when creating a new project is added. link

30/11/2022 iRidium Setup 1.3.52.0.30278

iRidium Studio 2019 (2.0.36.30278)

Bus77 Project. Displaying of «Report rate of the line» for gateways is added link
Bus77 Project. Support of Scenes is added link
Bus77 Project. Support of Global Scenes is added link
Bus77 Project. Support of the Scene Switch mode is added for the «Button» subdevice link
The list of functions in the prompter of the JS editor is expanded link
Possibility to copy all states of the item style via the RMB menu is added link
Possibility to move items in the project tree by the D&D method is added link

Client (1.3.52.30278)

Items. Advanced List. The "Stop by Tap" setup is added link
Drivers. Support of the "Televic Conference" driver is added link
Drivers. Support of the "SpinetiX" driver is added link
Drivers. Support of the "Satel Integra Network" driver is added link

Server (1.3.52.30278)

Drivers. Support of the "Televic Conference" driver is added link
Drivers. Support of the "SpinetiX" driver is added link
Drivers. Support of the "Satel Integra Network" driver is added link
Drivers. Z-Wave. Support of the "Aeotec WallMote" scene switch is added link

15/11/2022 iRidium Setup 1.3.51.1.30061

iRidium Studio 2019 (2.0.35.30061)

Bus77. DM-1400 support added link
Bus77. Thermostat. PID control mode support added link
Bus77. Line polling frequency for IS-CAN display added link

Server (1.3.51.30061)

Bugs fixing

28/10/2022 iRidium Setup 1.3.51.0.29741

Client (1.3.51.29740)

Bugs fixing

Server (1.3.51.29740)

Bugs fixing

26/10/2022 iRidium Setup 1.3.50.0.29728

iRidium Studio 2019 (2.0.34.29728)

Possibility to move (by D&D) "Project Token" to the "Relations" and "Command" sections of the "Programming" window is added link
Dynamic images. The "Disconnect when minimized" setting is added link

Client (1.3.50.29728)

Dynamic images.Support of the "Disconnect when minimized" setting is added link
Drivers. Support of the "Kramer VIA" driver is added link
Drivers. Support of the "Biamp Tesira" driver is added link
Drivers. Support of the "Novastar" driver is added link

Server (1.3.50.29728)

Drivers. Support of the "Kramer VIA" driver is added link
Drivers. Support of the "Biamp Tesira" driver is added link
Drivers. Support of the "Novastar" driver is added link

05/10/2022 iRidium Setup 1.3.48.0.29463

Client (1.3.48.29495)

The problem with UDP Broadcast on iOS 16 is fixed

15/09/2022 iRidium Setup 1.3.47.1.29461

iRidium Studio 2019 (2.0.33.29461)

Bus77 project and driver. Support of subdevices is added:
- Curtains/Shutters
- HSV dimmer
- Pressure sensor
- VOC sensor
- Noise sensor
- Diode
Bus77 project. Support of the Master button mode is added for Button
JS. Icons for statuses in pasword-protected scripts are added
Support of HDL MDT06015.533;HDL-MC64-DALI.431 is added

02/09/2022 iRidium Setup 1.3.47.0.29357

Client (1.3.47.29357)

Bugs fixing

Server (1.3.47.29357)

Bugs fixing

26/08/2022 iRidium Setup 1.3.46.0.29323

iRidium Studio 2019 (2.0.32.29323)

Bugs fixing

Client (1.3.46.29323)

Bugs fixing

Server (1.3.46.29323)

Bugs fixing

24/08/2022 iRidium Setup 1.3.45.0.29317

iRidium Studio 2019 (2.0.31.29317)

Drivers. KNX Router (KNXnet/IP) / Serial (UMC). The new subtype for channels is added - ‘7.600 Absolute colour temperature’
Possibility to create ‘Bus77’ projects is added link

Client (1.3.45.29317)

PJLink. Volume control is added link
Drivers. Support of the ‘Panasonic PTZ’ driver is added link

Server (1.3.45.29317)

PJLink. Volume control is added link
Drivers. Support of the ‘Panasonic PTZ’ driver is added link
Sber Salut. The following subdevices are added: link

- Radiator/heater

- Floor heating

- LED strip

- Opening sensor

- Motion sensor

- Relay

- Temperature and humidity sensor

- Blinds/Shutters

- Curtains

- Fan

- Scene switch

Licence. Support of local licensing of projects is added

27/06/2022 iRidium Setup 1.3.44.0.28482

iRidium Studio 2019 (2.0.30.28482)

Import. The "Bus77 Project import" is added link

Client (1.3.44.28482)

Drivers. Support of the "Bus77" driver is added link

Server (1.3.44.28482)

Drivers. Support of the "Bus77" driver is added link

20/06/2022 iRidium Setup 1.3.43.0.27870

iRidium Studio 2019 (2.0.29.27870)

Schemes. The "Sel" block-scheme is added link
Setup of processing for the "\n\r" line break symbols is added in the Text property of an item link
Possibility to change the item size for the size of an image on it is added

Client (1.3.43.27870)

Drivers. Support of the "Lutron QSX" driver is added
Drivers. "Z-Wave.Me". Support of work by the remote token
Drivers. Helvar. Support of feedback channels is added: Query Device Is Disabled, Query Lamp Failure, Query Device Is Failure, Query Device Is Missing. link

Server (1.3.43.27870)

Drivers. Support of the "Lutron QSX" driver is added
Drivers. "Z-Wave.Me". Support of work by the remote token
Drivers. Helvar. Support of feedback channels is added: Query Device Is Disabled, Query Lamp Failure, Query Device Is Failure, Query Device Is Missing. link

03/06/2022 iRidium Setup 1.3.42.0.27748

Client (1.3.42.27748)

Fixing bugs

Server (1.3.42.27748)

Fixing bugs

31/05/2022 iRidium Setup 1.3.41.0.27738

Client (1.3.41.27738)

Fixing bugs

Server (1.3.41.27738)

Fixing bugs

17/05/2022 iRidium Setup 1.3.40.0.27726

iRidium Studio 2019 (2.0.28.27726)

Possibility to copy the Virtual driver between the projects is added link
The window for setting up the Advanced List item is modified link
Possibility to change the size of a group of items is added link

Client (1.3.40.27726)

The "Cancel download" button is added when downloading projects from the cloud link
Support of "ETS Remote" is added link
Support of the Z-Wave.Me driver is added
Fixing bugs

Server (1.3.40.27726)

UMC. Support of "ETS Remote" is added link
Support of the Z-Wave.Me driver is added
Fixing bugs

13/04/2022 iRidium Setup 1.3.39.0.27478

iRidium Studio 2019 (2.0.27.27478)

Drivers. Ajax Network.Support of new subdevices is added link
Drivers. Yandex Alice Platform. Support of new subdevices is added link
Setting up of the template for text displaying on the Button item at D&D [Command, Feedback,Token] in the workspace of the panel project is added. link
Opening of the server project from the menu of the panel project tab is added. link
A new way of project scaling to display the "Page;Popup" items in the workspace is added. (ZoomToFit) link
The hot keys Ctrl+ (+/-/0) for changing the project scaling are added. link
The button for activating the window for creating animation from the General tab of the popup is added. link
The window for selecting several popups to be displayed on the page is added. link
The window of popup selection for the "Static List" item is modified. link

Client (1.3.39.27478)

Fixing bugs

Server (1.3.39.27478)

Drivers. Ajax Network.Support of new subdevices is added link
Drivers. YandexAlicePlatform. Possibility of work with sensors is added link

01/04/2022 iRidium Setup 1.3.38.0.27261

Client (1.3.38.27261)

Bugs fix

Server (1.3.38.27261)

Bugs fix

28/03/2022 iRidium Setup 1.3.37.0.27254

Client (1.3.37.27254)

Bugs fix

Server (1.3.37.27254)

Bugs fix

21/02/2022 iRidium Setup 1.3.36.0.27163

iRidium Studio 2019 (2.0.26.27163)

Support of Drag&Drop for feedbacks from the Devices tree to the Relations area (the Programming window) is added link
The "Hand" tool for moving the working area of the panel project is added link
Highlighting of group addresses when importing from the ETS project ( "by the building structure" like in the ETS Import panel) is added link
Drivers. Support of the "Philips Dynalite" driver is added link
Serbian language is added

Client (1.3.36.27163)

Items.EditBox. Possibility of text highlighting and operations "Cut","Copy" and "Delete" are added
Drivers. Support of the "Philips Dynalite" driver is added link

Server (1.3.36.27163)

Drivers. Support of the "Philips Dynalite" driver is added link
Drivers. Sber Salut. Support of the HVAC subdevice is added link (Only russian) link

10/12/2021 iRidium Setup 1.3.35.0.26916

iRidium Studio 2019 (2.0.25.26916)

Bug fixes

Client (1.3.35.26916)

Bug fixes

Server (1.3.35.26916)

Bug fixes

6/12/2021 iRidium Setup 1.3.34.0.26848

iRidium Studio 2019 (2.0.24.26834)

Saving of the scaling for displaying a project in Studio is added for each project separately
The "Delete, All relation and command" function is available via "RMB" for groups of graphic items
Support of fractional spacing for fonts is available link
Support of indents for texts in items is available link
Possibility to use "Forward value to" for driver tokens is added

Client (1.3.34.26834)

Drivers. BACNet Network. Mode selection for update of variables is added

Server (1.3.34.26838)

Drivers. Support of the "Sber Salut" voice assistant is added (Only russian) link
Drivers. Support of the "Mail Marusya" voice assistant is added (Only russian) link
Drivers. Support of the "Ajax Network" driver is added
Linux. Support of NVMe discs is added
Drivers. BACNet Network. Mode selection for update of variables is added
Support of Raspberry Pi 4 Model B is added link

25/10/2021 iRidium Setup 1.3.33.0.26283

iRidium Studio 2019 (2.0.23.26283)

Items. Tokens filled, empty are added for level, circular level, multistate level, multistate circular level items link
Items. Support of switching the item states on the Projects panel (the States tab) is added link
Items. The template for outputting fractional values ($F,1..$F,5) is added, so that the separator character of the fractional part is a comma link
Items. The default behaviour of the Up/Down button item is changed (without без built-in connections) link
JS editor. Text search by closed scripts (not only by open ones) is added
JS editor. Possibility to scroll the script window below the last text line (like in Visual Studio) is added
JS editor. Tabulation setup is added link
Schemes. Auto creation of the scheme template when dragging a scheme block to an empty workspace is added link
Schemes. Possibility to select the number of outputs for the "Duplicate" block is added link
System tokens. Application. The “Clear Project Tokens” token is added (available for writing only) link
Possibility to paste images from the exchange buffer to the workspace and project resources is added link
Support of proportional scaling when importing a vector based image is added link
Possibility to move the page across the workspace to work in negative coordinates is added link
Possibility to copy all auxiliary guiding lines form one page to another is added link
Possibility of multiple selection and moving popups with Ctrl/Shift in the editor of the popup groups is added link

Client (1.3.33.26283)

Drivers. TIS Network. Support of new subdevices is added: Media control, Thermostat, Logic 4T sensor, Logic Health sensor, Logic PIR sensor, Logic 10F sensor, Digital input, Floor Heating, Universal Switch Project, Universal Switch DVD, Universal Switch IPTV, Universal Switch TV Box, Universal Switch TV, RGB link
Drivers. Tion Network. Support of the "Zone sensor" subdevice is added + minor improvements link
Drivers. Support of the "Onvif Network" driver is added link
Support of the “Clear Project Tokens” system token and the JS method IR.ClearProjectTokens() for resetting the current values to the default ones is added link

Server (1.3.33.26283)

Drivers. ZigBee. Support of "Danfos" equipment is added link
Drivers. ZigBee. Support of USB memory sticks is added: "Nortek HUSBZB-1", "Elelabs Zigbee USB Adapter", "DEFARO SprutStick Pro". link

31/08/2021 iRidium Setup 1.3.32.0.25676

iRidium Studio 2019 (2.0.22.25676)

Universal import from JS. The ability to import virtual variables is added link
The ability to open the "Forward Value To - Object Selection" window by clicking "Enter" is added
Closing of tabs (scripts, projects) by the middle mouse button is added
Drivers. HDL Buspro Network. Operation codes for working with the Granit panel are added

Client (1.3.32.25676)

JavaScript. IR.CalculateHash. Support of the algorithms hmac_md5, hmac_sha1, hmac_sha256, hmac_sha384, hmac_sha512 is added link
JavaScript. Support for working with a byte array in the JS methods IR.Base64Encode and IR.Base64Decode is added
Drivers. Domintell. Support of hardware (QG2; EV1; DX2; DPBC01; DPBC02; DPBC04; DPBC06) is added
Drivers. Domintell. The ability to adjust the delay between sent commands is added
Drivers. Crestron. Support of SSL authentication for processors 3 (with firmware 1.6+) and 4 series is added
Drivers. Crestron. The ability to send the Serial type commands with Unicode support for new types of connections is added
Drivers. HDL Buspro Network. Support of Granit panel is added

Server (1.3.32.25676)

JavaScript. IR.CalculateHash. Support of the algorithms hmac_md5, hmac_sha1, hmac_sha256, hmac_sha384, hmac_sha512 is added link
JavaScript. Support for working with a byte array in the JS methods IR.Base64Encode and IR.Base64Decode is added
Drivers. Domintell. Support of hardware (QG2; EV1; DX2; DPBC01; DPBC02; DPBC04; DPBC06) is added
Drivers. Domintell. The ability to adjust the delay between sent commands is added
Drivers. Crestron. Support of SSL authentication for processors 3 (with firmware 1.6+) and 4 series is added
Drivers. Crestron. The ability to send the Serial type commands with Unicode support for new types of connections is added
Drivers. ZigBee. Support of Xiaomi Aqara hardware is added
Drivers. ZigBee. The support of Legrand Netatmo is added
Drivers. HDL Buspro Network. Support of Granit panel is added

07/07/2021 iRidium Setup 1.3.31.0.25286

iRidium Studio 2019 (2.0.21.25286)

Drivers. iNels. GROUP DIGITAL control command is realized.
Drivers. Intesis driver is added link
Drivers. TV LG WebOS driver is added link
Drivers. Support of KNX USB interface (KNX HID) is added link
A capability to change fonts in a whole project is added.
A capability to turn on/off a group of scripts is added (JS editor).
Display of individual addresses of BAOS devices in the synchronization menu of ETS with a project is added.
Bugs fixes.

Client (1.3.31.25286)

Drivers. iNels.GROUP DIGITAL control command is realized.
Drivers. Intesis driver is added link
Drivers. TV LG WebOS driver is added link
Drivers. Support of KNX USB interface (KNX HID) is added link
Drivers. Bluesound. Processing the feedback of the Play event is added.
Use of the HMAC SHA-256 encryption method is realized in scripts.
Bugs fixes.

Server (1.3.31.25286)

Drivers. iNels. GROUP DIGITAL control command is realized.
Drivers. Intesis driver is added link
Drivers. TV LG WebOS driver is added link
Drivers. Support of KNX USB interface (KNX HID) is added link
Drivers. Bluesound. Processing the feedback of the Play event is added.
Drivers. ModBus. Support of server monitoring of messages in the Modbus bus is added (Direct RS-485 and TCP connection).
Use of the HMAC SHA-256 encryption method is realized in scripts.
Bugs fixes

Site

Drivers. AMX. A capability to turn on/off "Single Beep" during import of TP4 projects via an account (web-interface) is added.

16/06/2021 iRidium Setup 1.3.30.0.24942

iRidium Studio 2019 (2.0.20.24942)

Drivers. Samsung TV fixes
Other non-critical fixes

Client (1.3.30.24942)

Drivers. Modbus fixes
Drivers. Samsung TV fixes
Other non-critical fixes

Server (1.3.30.24942)

Drivers. Modbus fixes
Drivers. Samsung TV fixes
Other non-critical fixes

31/05/2021 iRidium Setup 1.3.29.0.24874

iRidium Studio 2019 (2.0.19.24874)

Drivers. HDL Buspro Network. Support of commands containing Operation code - "Floor Heating Control (DLP)" for the "Enviro" panel is added link
Drivers. Support of the "Wake-on-LAN" driver is added link
Drivers. Support of the "EIDE" driver is added
Drivers. Support of the "Xicato" driver (to control equipment via the IP gate) is added
Drivers. Support of the "Bluesound" driver is added link
Drivers. Yamaha Network. Minor improvements are made after testing the drive on models "Yamaha WX-021" и "WX-051"
Drivers. Helvar. Support of decimal values for the "Direct Level Group" & "Direct Level Device" commands is added
Drivers. Larnitech. Support of the "CO2 sensor" is added link

Client (1.3.29.24874)

Drivers. HDL Buspro Network. Support of commands containing Operation code - Floor Heating Control (DLP) for the Enviro panel is added link
Drivers. Support of the Wake-on-LAN driver is added link
Drivers. Support of the EIDE driver is added
Drivers. Support of the Xicato driver (to control equipment via the IP gate) is added
Drivers. Support of the Bluesound driver is added link
Drivers. Yamaha Network. Minor improvements are made after testing the drive on models Yamaha WX-021 и WX-051
Drivers. Helvar. Support of decimal values for the Direct Level Group & Direct Level Device commands is added
Drivers. Larnitech. Support of the CO2 sensor is added link

Server (1.3.29.24874)

Drivers. HDL Buspro Network. Support of commands containing Operation code - Floor Heating Control (DLP) for the Enviro panel is added link
Drivers. Support of the Wake-on-LAN driver is added link
Drivers. Support of the EIDE driver is added
Drivers. Support of the Xicato driver (to control equipment via the IP gate) is added
Drivers. Support of the Bluesound driver is added link
Drivers. Yamaha Network. Minor improvements are made after testing the drive on models Yamaha WX-021 и WX-051
Drivers. Helvar. Support of decimal values for the Direct Level Group & Direct Level Device commands is added
Drivers. Larnitech. Support of the CO2 sensor is added link

Site

The "Strizh" JS module is added link

11/05/2021 iRidium Setup 1.3.28.0.24432

iRidium Studio 2019 (2.0.18.24432)

Drivers. The "PJLink" driver is added
Bugs fixes

Client (1.3.28.24432)

Drivers. Support of "PJLink" driver is added
Launch speed of i3Pro app is increased
Bugs fixes

Server (1.3.28.24432)

Drivers. Support of "PJLink" driver is added
Bugs fixes

14/04/2021 iRidium Setup 1.3.27.0.24322

iRidium Studio 2019 (2.0.17.24322)

Localization for French language in the studio interface is updated
Drivers. The "Amazon Alexa (v3) Network" driver is added
Yandex Alice Platform. Added commands:

- "Humidity" for the "Thermostat" and "Conditioner" subdevices link

- "TemperatureCelsius" for the "Air humidifier" subdevice link

- "Range" for the "Blinds" subdevice link

- The RGB channel is removed from the "Lamp" device. The new "RGB lamp" subdevice is added link

KNX. The subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added link
Drivers. The "Samsung TV" driver for R/Q series is added link

Client (1.3.27.24320)

KNX. Support of subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added link
Drivers. Support of the “Samsung TV” driver for R/Q series is added link
SIP. The "Automatic gain control" setting is added link

Server (1.3.27.24320)

Drivers. Support of the “Amazon Alexa (v3) Network” driver is added
Voice assistants (YandexAlice,GH,Alexa). Possibility to work via the new skill - “iRidium Assistant” - is added
Yandex Alice Platform. Added commands:

- "Humidity" for the "Thermostat" and "Conditioner" subdevices link

- "TemperatureCelsius" for the "Air humidifier" subdevice link

- "Range" for the "Blinds" subdevice link

- The RGB channel is removed from the "Lamp" device. The new "RGB lamp" subdevice is added link

KNX. Support of subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added link
Drivers. Support of the “Samsung TV” driver for R/Q series is added link

22/03/2021 iRidium Setup 1.3.26.0.24029

iRidium Studio 2019 (2.0.16.24029)

Driver. Yandex Alice Platform. The "Use name" parameter for subdevices is added link
The native Yamaha driver is added link
Auxiliary guides for aligning elements are added link
Opening of the Dropdown menu by presssing "RMB" is added for the tools "Draw","Item Position","Align","Spacing","Text align","Grid"

Client (1.3.26.24029)

iOS. Support of Face ID is added link
Drivers. Support of Yamaha driver is added link
JS. Possibility to activate/deactivate the proximity sensor on iOS and Android devices is added link
Drivers. Larnitech. Speed of the driver work is increased

Server (1.3.26.24029)

Drivers. Support of Yamaha driver is added link
Drivers. Yandex Alice Platform. Support of the "Device name" parameter for subdevices is added link
JS. Possibility to connect the Amazon Alexa voice assistant to an iRidium project via scripts is added link
Drivers. Larnitech. Speed of the driver work is increased

8/02/2021 iRidium Setup 1.3.25.0.23568

iRidium Studio 2019 (2.0.15.23568)

Support of user databases from the old studio versions (.*irdb) is improved - Display of folders for serials of devices is added;
Possibility to set up editable server routines is added ; link
The "TextArea" item is added; link
Possibility to select addresses from the panel of ETS import (for data synchronization) is added ; link
The "indent" property is added for "Static List"; link
Possibility to transfer sounds from one project to another is added; link
Camera can be selected in the item properties in the "Image" field now.

Client (1.3.25.23561)

Drivers. AV&Custom systems (HTTP). Possibility to send the "DELETE" and "PATCH" type requests is added;
Drivers. BacNet Network. Possibility to setup time of re-subscribing the driver;
Drivers. HDL Buspro Network. Support of Operation code: Read Status of Channels (DALI) is added;
Possibility to edit server routines from the panel project is added. link

Server (1.3.25.23561)

Drivers. AV&Custom systems (HTTP). Possibility to send the "DELETE" and "PATCH" type requests is added;
Drivers. BacNet Network. Possibility to setup time of re-subscribing the driver;
Drivers. HDL Buspro Network. Support of Operation code: Read Status of Channels (DALI) is added;

14/12/2020 iRidium Setup 1.3.24.1.22973

iRidium Studio 2019 (2.0.14.22973)

Added the ability to select scripts to transfer to a server project when creating it based on a panel project;
Added automatic setting of the "send value by hold" value to the "send value by" property of the "trigger button" element when using the "hold" event;
Added the ability to disable rulers in schemes;
Added the ability to choose to add / not add Single Beep sound when importing "TP4" project into the studio;
Added the ability to adjust the step for the "Level" item;
Added the ability to copy folders via the "RMB" context menu in the project tree;
Added the ability to change the name of scripts with the "F2" key;
Added hotkeys for "Copy Style State" and "Paste Style State";
Added "RTL" support for Arabic;
Added the ability to customize the "Pie Chart" from the editor (without knowing "JS");
Improved the "Vertical Center Align" tool;
Fixed "Scale to Fit" parameter for importing "(AMX) TP5" projects into studio;
Added "Drag Drop" items inside the schedule window and the routine window;
Added search for "ETS" import window.

25/11/2020 iRidium Setup 1.3.24.0.22733

iRidium Studio 2019 (2.0.13.22397)

Drivers. The TION driver is added link
Drivers. AV&Custom System (HTTP). Capability to select Digest authentication in driver settings is added link
Drivers. Sonos. The "Sonos groups" driver is added to work with grouping players link

Client (1.3.24.22733)

Javascript. Support of methods for working with item animation is added link
Drivers. Sonos. Capability to work with grouping players is added link
Drivers. AV&Custom System (HTTP). Capability to work with Digest authentication is added link
Drivers. Support of the TION driver is added link
iRidium P7-PoE. Support of methods for side lighting control is added link

Server (1.3.24.22733)

Drivers. Sonos. Capability to work with grouping players is added link
Drivers. AV&Custom System (HTTP). Capability to work with Digest authentication is added link
Drivers. Support of the TION driver is added link

11/11/2020 iRidium Setup 1.3.23.1.22386

iRidium Studio 2019 (2.0.13.22386)

hotkeys Ctrl + C and Ctrl + V now work in the Project tree
events in the Programming window can now be minimized
when creating a Level item its Direction is selected automatically
the Close button (the cross) for dialog windows is added
the setting for indent size – Tab – is added in the script tools / options / script
errors in the Domintel scanner are fixed
the RMB menu for the schedule window is improved
names in the i/o window for schemes are displayed in short now for better readability
folders can be renamed in the global sound gallery now
sounds from the global gallery can be drag’n’dropped into scripts
popup size can be changed right after its unlocking now
the dialog window for command creating opens now when drag’n’dropping a command to the circular level
the horizontal scrolling by Shift + wheel is added in the script editor
the Min, Max properties of the Level item can now be used in relations
import of Beckhoff ADS is added
the color selection window is improved (now you can select brightness from the palette)
the Text Effect Color property is added in Object Properties / States
the item properties are displayed in Object Properties now even when it is in a group
minor bugs and errors are fixed, minor ui bugs are fixed and overall stability is improved

14/10/2020 iRidium Setup 1.3.23.0.22094

iRidium Studio 2019 (2.0.12.22094)

Improved stability, fixed bugs;
Improved GUI;
FBD schemas can have a repetition interval of less than 1 second;
Added new gallery of graphics items;
Added hotkey Shift + F2 to insert text on all element states in the workspace;
Fixed alignment tools;
Improved compatibility with projects from the old version;
Added folders to the script tree;
Drivers. The Sonos native driver is added; link
Drivers. HDL. New commands for IR emitters are added. link
Drivers. KNX. The token of the poll status is added - TagUpdate link

Client (1.3.23.22094)

Drivers. Support of the Sonos native driver is added;link
Win. Editbox. Highlighting of text with hot keys is added:
- Shift + Home to select all text before marker.
- Shift + End to select to select all text after marker.
- Shift + Left arrow to select one character before marker.
- Shift + Right arrow to select one character after marker.

Drivers. HDL. Support of new commands for IR emitters is added.link
Drivers. KNX. Support of token of the poll status is added - TagUpdate link

Server (1.3.23.22094)

Drivers. HDL. Support of new commands for IR emitters is added.link
Drivers. KNX. Support of token of the poll status is added - TagUpdate link

10/09/2020 iRidium Setup 1.3.22.0.21556

iRidium Studio 2019 (2.0.11.21556)

Work of schemes is corrected;
Corrections in Domintell scanner are made;
Export and import of schemed are added;
Support of devices with WebSocket protocol is added to Domintell scanner; link
The set of block-schemes is widened;
Changes in the design are made;
Critical errors are corrected;
Drivers. KNX. The "Read request"parameter is added to channel settings; link
Drivers. The "AV & Custom Systems (WebSocket)" driver is added; link
Drivers. The "Keep Alive" parameter is added for all TCP drivers; link
Drivers. Domintell. The "WebSocket" type of protocol to work with DGQG04 module is added. link

Client (1.3.22.21554)

Drivers. KNX. Support the "Read request" parameter is added; link
Drivers. Support of the "AV & Custom Systems (WebSocket)" driver is added; link
Drivers. Support of the "Keep Alive" parameter is added for all TCP drivers; link
Drivers. Domintell. Support of work with DGQG04 module is added. link

Server (1.3.22.21554)

Drivers. Z-Wave. Support of "Fan Mode" and "Fan State" for termostate is added; link
Drivers. KNX. Support the "Read request" parameter is added; link
Drivers. Support of the "AV & Custom Systems (WebSocket)" driver is added; link
Drivers. Support of the "Keep Alive" parameter is added for all TCP drivers; link
Drivers. Domintell. Support of work with DGQG04 module is added. link

05/08/2020 iRidium Setup 1.3.20.1.21085

iRidium Studio 2019 (2.0.10.21085)

Errors in import of Crestron driver are corrected;
Drag'n'dropping commands between folders in the driver tree is corrected
Changes in design are made;
Work with history is improved;
Larnitech scanner is added;
Support of user databases with *.db resolution is added.

16/07/2020 iRidium Setup 1.3.20.0.21001

Bugs fixes.

13/07/2020 iRidium Setup 1.3.19.0.20956

Client (1.3.19.20956)

Win. System Menu. Setting for changing client window orientation is added; link
Bugs fixes.

06/07/2020 iRidium Setup 1.3.18.2.20923

iRidium Studio 2019 (2.0.9.20923)

Import of names of BAOS datapoints is corrected;
System of creating folders when importing EST projects is changed;
Filling the Description field with a group address and a subtype of KNX channel is added;
Capability to move folders between Global Caché devices is added;
Changes in design are made;
Stability is improved.

11/06/2020 iRidium Setup 1.3.18.1.20787

iRidium Studio 2019 (2.0.8.20787)

Error in synchronization of a panel project with a server one is corrected.
Saving projects in the gallery is corrected.
SIP driver is added to a server project.
Capability to turn off scripts is added.
1-Wire import is added
Zigbee import is added.
Support of projects from the old studio is improved.
Work of the studio on Windows 7 is improved.

28/05/2020 iRidium Setup 1.3.18.0.20605

iRidium Studio 2019 (2.0.7.20635)

Improved support of projects from old studio;
Improved work of Forward value to;
Improved work of Duotecno;
Added feature to set a password for a script file;
Added support of KNX projects from the new version of ETS;
Changes in design;
Improved stability of the studio.

Client(1.3.18.20605)

JavaScript. The IR.OpenPhotoCamera() method to activate the system camera is added; link
Javascript. The IR.DeleteImage() method to delete the camera created via scripts is added; link
Drivers. The SIP driver is updated. Added: link
- work via the TCP protocol
- possibility to redirect calls
- the "Preview" mode before replying
- the "Do not disturb" mode
- improved sound processing
Dirvers. ControlArt 7Port. Possibility to send commands for Somfy is addded; link
Drivers. AMX. The IRLB commands for working with items on lists is added; link

08/05/2020 iRidium Setup 1.3.16.3.20299

iRidium Studio 2019 (2.0.6.20299)

Corrections in item resize when they are added from the gallery;
Corrections in item resize when project resolution is changed;
Support of KNX projects with a password is added.
Date of last synchronization is added to ETS import;
Moving folders with commands between channels of GC driver is added;
Stability is improved.

20/04/2020 iRidium Setup 1.3.16.2.20204iRidium

iRidium Studio 2019 (2.0.5.20204)

Deletion of connections when copying an item is corrected;
Error in the work of Duotecno scanner is corrected;
Error of sending wrong values to levels is corrected;
Error at impulse creation is corrected;
Display of item names in show usage commands is added;
"Forward value to" feature is added; link
Minor corrections in design are made.

06/04/2020 iRidium Setup 1.3.16.1.20039

Client(1.3.16.20039)

Drivers. Support of the "ControlArt 7Port" driver is added; link
JavaScript. Listeners for the beginning and the end of the KNX bus polling are added; link
JavaScript. Listener for receiving a license by the client is added; link
Drivers. SNMP. The "Interval between tag polls" and "Maximum number of tag polls" parameters are added; link

Server(1.3.16.20039)

Drivers. Support of the "ControlArt 7Port" driver is added; link
JavaScript. Listeners for the beginning and the end of the KNX bus polling are added; link
JavaScript. Listener for receiving a license by the client is added; link
Drivers. SNMP. The "Interval between tag polls" and "Maximum number of tag polls" parameters are added; link

iRidium Studio 2019 (2.0.4.20039)

Errors in schemes are corrected;
Errors during import are corrected;
An error of creating a command with a delay is corrected;
An error of copying a device into another subnet is corrected;
Behavior of a dialogue to assign a command to an item is;
ControlArt 7Port driver is added;
New KNX import is added; link
"None" is added to the landscape orientation of the Screensaver.
Import of "xml" and "csv" files for BacNet is added link

16.03.2020 iRidium Studio 2019 1.3.16.0

Parsing of cameras from old projects is corrected;
Tree of scripts is added;
Changes in design;
Improved stability.

02.03.2020 iRidium Studio 2019 1.3.15.0

Display of level cursor is corrected;
Bug in display of slider settings of circular levels is corrected;
Search function is added to the list of manufacturers for Global Caché;
Search function is added to dropdown lists;
Changes in design.

18.02.2020 iRidium Studio 2019 1.3.12.2

Wrong type of connection is corrected in 1-Wire driver;
Project resolution is added to the name when importing from master project;
Button to synchronize with a server project is added;
Capability to change the color of item border is added;
Stability is improved.

04/02/2020 iRidium Studio 2019 1.3.12.1

Fixed tokens in folders;

Fixed disabling items in tree ;
Fixed schemes with virtual tags and commands;
Fixed import of Crestron driver;
Improved support old projects;
Added script update from external editor without requests

20.01.2020 iRidium Studio 2019 1.3.12.0

Fixed Clipsal driver;
Fixed server on downloading projects with diagrams from the cloud;
Fixed learning iTach devices;
Added New blocks to schemes (Min, Max, Map);
Added highlighting selected characters in script editor;
Added Undo / Redo buttons to script editor;
Added tooltips for feedback in charts editor;
Added protected projects
Added the ability to hide items in the project tree;
Improved old projects support;
Improved studio stability;
Improved studio design.

12.10.2019 iRidium Studio 2019 1.3.11.10

Fixed import of ETS;
Pop-up groups editor can showed as dialog;
Improved Script editor;
Improved Design.

25.11.2019 iRidium Studio 2019 1.3.11.9

Fixed detect names by the HDL scanner;
Fixed Yandex Alice Platform driver;
Fixed save projects on network storage;
Added of macros gallery;
Improved optimization.

11.11.2019 iRidium Studio 2019 1.3.11.8

HDL Scanner can scan with several network cards;
Fixed Inels Wireless driver;
Fixed choice of recording format in the database;
Improved programming view;
Added import of custom drivers databases;
Added display licenced tags counter for server project
Added number of attempts and scan time to HDL Scanner;
Improved optimization.

28.10.2019 iRidium Studio 2019 1.3.11.7

Fixed the KNX LMx driver (Logic Machine), added connection settings;
DnD commands / feedbacks to Programming View;
Strict and non-strict select for items in Workspace
Added color picker to the script editor;
Added a new Label item;
Improved support for old projects;
Improved studio design.

14.10.2019 iRidium Studio 2019 1.3.11.6

Improved states panel;
New colors dialog;
Added "copy of element state style" to right-click menu;
Added Drag-n-Drop and double-click to template selection window for static list;
Added "horizontal scroll" hot key as Shift + mouse wheel;
Added new Apple devices resolutions;

30.09.2019 iRidium Studio 2019 1.3.10.5

Fixed fonts dialog;
Fixed HDL Driver;
Fixed encripted scripts load;
Improve i2 and i3 projects support;
Added BACNET Import;
Added Emulator button for server projects;
Added Multi-State Images import to GUI Gallery (jsut drop images with separator '_' to make it);
Added new alignment tool - Set horizontal / vertical spaces (you can specify the distance between the elements);

16.09.2019 iRidium Studio 2019 1.3.10.4

Improved old projects support;
Improved stability;
Added save project protection when not enough space on the hard drive;
Added stop playing sounds in the gallery;
Fixed studio window crash on minimize;
Fixed projects resize;

02.09.2019 iRidium Studio 2019 1.3.10.3

Сhanges in server schedules;
Сhanges in server routines;
Сhanges in the Yandex Alice driver;
Сhanges in the transfer;
Сhanges in the script editor;
Fixes import to the gallery;
Added items grouping;
Added D-n-d in the programming window;
Added D-n-d in the macro window;
Added ability to minimize events in the programming window;
Improved performance.

19.08.2019 iRidium Studio 2019 1.3.10.2

Corrections in HDL driver;
Corrections in KNX Router (KNXnet/IP) / Serial (UMC) driver;
Corrections in Transfer work;
Start page is added;
Capability to DnD text is added;
Interface is improved.

05.08.2019 iRidium Studio 2019 1.3.10.1.17761

Corrected errors in Windows 7 work;
Corrections in Virtual driver;
Corrections in Amazon Alexa Network driver;
Corrections in Google Home Network driver;
Corrections in import of TPDesign5 projects;
Improved work with scripts;
Improved work with projects from old studio;
Improved work with studio when opening projects from windows explorer;
Added import from сsv file (*.csv) to Modbus driver.

22.07.2019 iRidium Studio 2019 1.0.1.17590

Corrected errors in Windows 7 work;
Corrections in Virtual driver;
Corrections in Amazon Alexa Network driver;
Corrections in Google Home Network driver;
Corrections in import of TPDesign5 projects;
Improved work with scripts;
Improved work with projects from old studio;
Improved work with studio when opening projects from windows explorer;
Added import from сsv file (*.csv) to Modbus driver.

21.06.2019 iRidium Studio 2019 1.0.0.17309

Development of scanner;
Development of graphic items;
Development of a server project;
Development of import from ETS project;
Development of converting AMX projects;
Development of search when adding drivers and subdevices;
Corrections in AV & Custom Systems driver:
Corrections in Larnitech driver;
Corrections in Helvar driver;
Corrections in Domintell driver;
Corrections in KNX driver;
Corrections in HDL driver;
Corrections in Serial drivers;
Global Cache cloud is added;
Helvar TCP / UDP driver is added;
ZWave Network is added;
Corrections in project merge;
Corrections in selecting groups of items;
Corrections in search in all scripts;
Fast panel is moved down;
Optimization of working with projects from the Studio of previous versions.

20.05.2019 iRidium Studio 2019 1.0.0.17064

Added search for channels and feedbacks in the server project;
Fixes in the HDL driver;
Corrections to the driver Driver KNX Router;
Driver BACNet driver fixes;
Fixes in the AV & Custom Systems driver (TCP / UDP / HTTP);
Removed Galact DVR driver (beta);
Fixed a bug with the transfer of text containing Enter;
Correction of camera bugs from the studio gallery;
Bug fix with fioat function for levels
Added icons to menu items;
Added support for AMX projects;
Added import of ETS projects;

15.04.2019 iRidium Studio 2019 1.0.0.16825

Tools:

Creating a panel project
Creating a server project
Opening projects
View recently used projects.
Item alignment
Text alignment
Grid
Communications window
Item Settings Panel

Localization

Russian
English
Netherlands

Studio settings

emulator settings
workspace settings
Backups
Setting the project's default graphic theme

Project Settings

Project resize
Setting up start pages
Screensaver setting
Setting project passwords
Remote debugging setup
Project info

Server project

Driver setup
Setting rules
Schedule setting
System tokens
Project Tokens

Panel project

Workspace
Graphic elements
- Button
- Level
- Multistate button
- Multistate level
- Joistick
- Editbox
- List
- Up / Down button
- Trigger button
- Virtual key
- Static list
- Linear trend
- Pie char
- Bar char
- Circular level
- Advanced list

Gallery
- Global Gallery
- Local Gallery
- Sounds
- Cameras
- Fonts

drivers in the project
System tokens
Project Tokens
System tokens
Project Tokens
Modules

Drivers

SNMP
Sip
MQPP
Modbus TCP
Modbus TCP Server (Slave mode)
Modbus RTU
Mosbus ASCII
Lutron
KNX Router
KNX IP BAOS 771-774 / 777
KNX BAOS 770
iRidium Server
iNels RF
Helvar
Hdl
Global cache
Epsnet
Elko EP iNels
DuoTecno
Domintell
AV & Custom systems (HTTP)
AV & Custom systems
Crestron
Clipsal
Beckhoff
Bacnet
AMX
1-Wire

Scanners / Importers

HDL scanner
DuoTecno Scanner
Domintell scanner

Scripts

Work with script modules
Intellectual hint
Script helper
Work in a third-party IDE

Previous article: What's New in iRidium lite

Next article: KNX Home Server and i3 KNX. Changelog (EN)

This article was helpful for 16 people. Is this article helpful for you?

Customer support service by UserEcho