Modules

On this forum you can discuss iRidium modules with other users. Please post here your questions, ideas or errors you find.

0
Completed
Ilya Markov (expert) 1 year ago in HDL Buspro / HDL Floor Heating • updated 1 year ago 1


HDL Floor Heating


Type: Panel

Developer: iRidium mobile

Manufacturer: HDL


The module enables control of Floor Heating devices in the HDL Buspro bus with manual input of parameters. The HDL scanner can be used for automatic search of HDL Buspro devices. Also the scanner downloads and installs modules for required devices without requesting parameters.The module works by the HDL Buspro protocol.


Functions:

  • Power control;
  • Mode control (available modes: normal, day, night, away, timer);
  • Temperature control.

Sets of Actions, Events, Conditions enables use of all module functions in macros and scenes (routines).


Actions:

  1. Turn on - to turn on the floor heating;
  2. Turn off - to turn off the floor heating;
  3. Set mode - to set the selected mode for the floor heating;
  4. Set temperature - to set the desired temperature for the floor heating.

Events:

  1. On - the floor heating had just been turned on;
  2. Off - the floor heating had just been turned off;
  3. Temperature rises above - temperature has become higher than the indicated value;
  4. Temperature drops above - temperature has become lower than the indicated value;
  5. Mode has changed to - mode has changed to the selected value.

Conditions:

  1. On - the floor heating is on;
  2. Off - the floor heating is off;
  3. Temperature rises above - temperature is higher than the indicated value;
  4. Temperature drops above - temperature is lower than the indicated value;
  5. Mode has changed to - mode is set up to the selected value.