Modules

On this forum you can discuss iRidium modules with other users. Please post here your questions, ideas or errors you find.

0
Completed
Eivind Bø 5 months ago in HDL Buspro / HDL Sensor 12 in 1 • updated by Ilya Markov (expert) 4 months ago 5

How do we control the two relays?


12in1 relays are often used to control garage Doors. It is a impulse type where a closed AMD then opened relay will open or closed garage door. Can we make a button for that? In hdl panels we can use a momentary button

0
Completed
Ilya Markov (expert) 12 months ago in HDL Buspro / HDL Sensor 12 in 1 • updated by Eivind Bø 5 months ago 1


HDL Sensor 12 in 1


Type: Sensor

Developer: iRidium mobile

Manufacturer: HDL


The module enables display of Sensor 12 in 1 devices in the HDL Buspro bus with manual input of parameters. The HDL scanner can be used for automatic search of HDL Buspro devices. Also the scanner downloads and installs modules for required devices without requesting parameters. The module works by the HDL Buspro protocol.


Functions:

  • The module displays value of 6 sensors: Sonic, Motion, 2 Dry contact sensors, Brightness and Temperature.

Sets of Events and Conditions enables use of all module functions in macros and scenes (routines).


Events:

  1. Brightness has become higher - Brightness has become higher than the indicated value;
  2. Brightness has become lower - Brightness has become lower than the indicated value;
  3. Temperature rises above - Temperature has become higher than the indicated value;
  4. Temperature drops below - Temperature has become lower than the indicated value;
  5. Locked - Dry contact has just been locked;
  6. Unlocked - Dry contact has just been unlocked;
  7. Movement - Motion or Sonic detected movement;
  8. No movement - Motion or Sonic detected no movement.

Conditions:

  1. Brightness is higher - Brightness is higher than the indicated value;
  2. Brightness is lower - Brightness is lower than the indicated value;
  3. Temperature is above - Temperature is higher than the indicated value;
  4. Temperature is below - Temperature is lower than the indicated value;
  5. Locked - Dry contact is locked;
  6. Unlocked - Dry contact is unlocked;
  7. Movement - Motion displays detected movement;
  8. No movement - Motion displays detected no movement.