- i2 Control V2.2
- General
-
Вопросы
0
Отвечен
Problem with IP Cam
Hey every one
I have a problem when i try to connect my ip camera to iridium.
I use following URL i browser and i get image when pressing Test in Browser
http://192.xxx.xxx.xxx/videostream.cgi?user=[xx]&pwd=[xx]&resolution=32
Its image in browser:
And its setup:
When i transfer to Ipad i only get the blue image / button ..
Сервис поддержки клиентов работает на платформе UserEcho
Hello!
Which IP camera do you use?
could you try to use a simple alphanumeric password if you haven't already? I have had problems with using special characters in the past.
its tried :(
Hey again.
Its a no name cam but found on a ispy s list with following parameters
Create in the camera settings of the user, which will have the name and password.
Then use your link on the thread using the name and password of the user you created.
http://192.168.0.100/videostream.cgi?user=name&pwd=pass&resolution=32
Also make the following camera settings:
1) Demuxer = <Default>
2) Refresh = 1000
3) Delete "Param"
Dmitry, thanks a lot.. what a stupid error.. i forgot to remove [ ]... it works .