1. i2 Control V2.2
  2. Готовые скриптовые модули
  3. Готовое решение
+2
Завершен

PJLink protocol

Joseanio Galdino 10 лет назад в Готовые скриптовые модули • обновлен 8 лет назад • 14
Attached you will find a project with the PJLink protocol realisation.
A code to control and have feedback to any video projector with ethernet port and compatible with PJLink protocol.
I have tested with several models of Sanyo, Mitsubishi, Dell, Sony, NEC, and other, and all of them works fine with this code.

PJLink2(1).irpz

Завершен
Oksana (expert) 10 лет назад
José R. Angstmam 10 лет назад
Valeu grande Galdino, vou testar....grato
rusanov 9 лет назад
Tried your module today - worked great on Optoma EH415 projector, will try later on Panasonic. It controls inputs and power, including status feedback.

Question: is there any way to control other functions of projector through PJLink - menu, navigation etc.?

Thank you very much again!

Joseanio Galdino 9 лет назад
Hi Rusanov,
Thanks for your feedback,

Unfortunately the menu control is not part of PJlink Protocol it is focused in power control, input selection and status feedback. To do this we need to open a telnet connection ( not necessarily on port 23, can change depending on manufacturer ) with the projector and use the proprietary protocol of manufacturer, much more work.

PJLink Specification
Михаил Бутузов 9 лет назад

Hi Joseanio Galdino,

I try your program on panasonic projector, but it is not work. Tell me please, there are, a Authtorizathion in your program? There I can set a password and login?



Joseanio Galdino 9 лет назад

HI,


At the moment PJllink2 JS do not have the resource to authentication. The PJLink protocol authentication, is not simply inform user and password, is more complex. When the authentication feature is enabled in the Project and the tcp cliente connect to projector by port 4352, the projector send to the client an random number, the client need get this random number add the projector name , apply a MD5 algorithm, and send the result to the projector, within 30 seconds, if not the projector finish the connection.

So when I wrote the JS the time was short, and I did without authentication. I have intent to implement this in a new version in some time.

But, all PJlink compliance projectors have the possibility to disable authentication , and the PJlinj2 JS will work fine.


Sorry by that.


Михаил Бутузов 9 лет назад

Thank you.

I will try disable authentication.

Михаил Бутузов 9 лет назад

Hello,

This module is not work with Panasonic projectrors. I am try it on many projectors. Please add function authentication in the script, because I cant control Panasonic with feedback via tcp ip. Thank you.

Joseanio Galdino 9 лет назад

These week we finished an installation with 3 Panasonic Projectors 2 x WD6300 and 1 PT-Z870UK, all of them controled by pjlink working fine , we only need to set the network password as none,

so login: admin1 ( default to Panasonic ) and password: none ( blank )

Михаил Бутузов 9 лет назад

Ok Thanks. I will try it again.

+1
Joseanio Galdino 9 лет назад

for help: from panasonic PT-Z870 on page 168.


Nikolay Rusanov 8 лет назад

Joseanio, could you please help with question about your driver here?

http://support.iridiummobile.net/topics/12046-pjlink-and-optoma-projector-trouble/


Thank you!

Joseanio Galdino 8 лет назад

Hi Nikolay,


workaround the information below, maybe help you.



Joseanio Galdino 8 лет назад

You can use the official pjlink test software for confirm that teh projector is answering correct to the comands. http://pjlink.jbmia.or.jp/english/data_cl2/PJLink_5-2.zip


Сервис поддержки клиентов работает на платформе UserEcho