iRidium Pro. Change Log

RU: история версий iRidium Pro на русском языке

06/06/2024 iRidium Setup 1.3.66.0.37494

Client (1.3.66.37494)

The iOS version of the client will be released on Monday 10.06.2024

Bus77:

  • Added support for devices with 127 scenarios, new interface for scenario configuration link
  • Added support for devices with improved button functionality link

Server (1.3.66.37494)

Bus77:

  • Added support for devices with 127 scenarios, new interface for scenario configuration link
  • Added support for devices with improved button functionality link

    Studio (1.3.66.37494)

    Bus77 project:

    • Added support for devices with 127 scenarios, new interface for scenario configuration link
    • Added support for devices with improved button functionality link

    17/04/2024 iRidium Setup 1.3.65.0.37309

    Client (1.3.65.37309)

    Drivers:

    • Sonos. The connection between the driver and the equipment is restored

    Server (1.3.65.37309)

    Drivers:

    • Yandex Alice. Stability of connection to the cloud service during periods of increased load is increased

    Studio (2.0.50.37309)

    Bus77 project:

    • TW dimmer. New subdevice is added: TW dimmer
    • FS-BT6-OLED. New sub-device FS-BT6-OLED (Thermostat Screen) is added
    • Curtains. Support for phase and pulse control is added
    • Voltage regulator. Control from Bus77 buttons and sensors is added
    • UMC. Function for automatic sockets closing while working with a line is added
    • Process of flashing devices that leads to errors during flashing (disabling ping and second connection) is fixed
    • Warning popups about the need to update the firmware and about the impossibility of updating the firmware is added

    10/04/2024 iRidium Setup 1.3.64.0.37089

    Client (1.3.64.37089)

    Drivers:

    • SIP. SIP client connection via Linphone SIP Service to make audio/video calls is configured
    • SIP. Video communication with the Akuvox panel is improved: for transmitting a video stream and when making video calls

    Server (1.3.64.37089)

    Drivers:

    • AV & Custom System (WebSocket). Passing values when using the Headers parameter is fixed. Now, when adding the Headers parameter, the logic for sending data will not break
    • Modbus RTU. The Modbus RTU driver, TCP Gate protocol, for the HSS server is improved. Now the HSS server will be able to receive data from Modbus devices
    • Domintell. The Domintell driver for the DISM20 module is improved. Now the DISM20 channel addresses will be read in full and in the correct order

    Offline licensing:

    • Offline License. The encryption method for the client-server connection to increase the level of data security is changed

    Studio (2.0.49.37089)

    Drivers:

    • KNX. The scene numbering has been changed in accordance with ETS5 (from 1 to 64) and now there is no need to match the numbers when working in iRidium Studio
    • iRidium Server. Remote Cloud Control connection type was renamed to Direct & Remote Cloud Control for greater information content
    • AV Remote Control / ProAV Control Processor. New Data type for the IR subdevice - “Pronto Hex” is added. It allows you to configure the type of data used, IR.Hex or Pronto Hex.
    • Virtual. Back copying of Commands and Feedbacks from the Virtual driver between projects is added. That will help you to create new projects based on old ones

    Panel project:

    • Master Project. It is no longer possible to create a new master project, you can only edit previously created ones
    • Relations. Creation of a connection to the state of the Trend / Bar Chart / Pie Chart elements to avoid critical errors is removed
    • Automatic selection of a text field by transition with "Tab" is removed

    Web-panel (1.0.10.0)

    Drivers:

    • iRidium server. On the server web interface, in the iRidium server driver parameters, new counters “Virtual Channels”, “Virtual Tags”, “All channels” and “All Tags” is added. That will help to form an understanding of the number of tags in the project without returning to editing in iRidium Studio and quickly form an understanding of license costs

    05/03/2024 iRidium Setup 1.3.63.0.36872

    Client (1.3.63.36872)

    Features:

    • When downloading a project from the cloud, the application interface is not blocked

    Drivers:

    • Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added
    • ITC. Driver for managing ITC conference system controllers is added
    • AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added
    • MyHome. Command formation when using single digit numbers in A-PL settings is fixed

    Mac OSx (1.3.63.36868)

    • Window scaling bug in i3Pro application is fixed

    Server (1.3.63.36872)

    Features:

    • Ability to update iRidium Server application for the EU region is implemented
    • Web interface. A checkbox for disabling SSH access to the device on iRidi hardware platforms
    • Web interface. The page header now displays the current OS version and microcontroller firmware on ProAV Control Processor Basic and ProAV Control Processor Advanced devices

    Drivers:

    • Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added
    • ITC. Driver for managing ITC conference system controllers is added
    • AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added
    • MyHome. Command formation when using single digit numbers in A-PL settings is fixed
    • KNX Router (KNXnet/IP) / Serial. The "KNX IP Gateway" setting to enable KNX gateway mode (to replace the script) on platforms: HSS, AV Processor and UMC
    • AV & Custom System (Serial). Added Delimiter, Packet length, Interval time settings for filtering and shaping of incoming data

    Offline licensing:

    • Changes have been made within the framework of information security: the ability to use Transfer has been disabled, unnecessary HTTP traffic has been excluded

    Studio (2.0.48.36872)

    • FBD: For Logic AND, Logic OR, Bin AND, Bin OR blocks, the number of inputs/outputs is expanded to 16
    • FBD: "Interlock" and "Multiple NOT" blocks with the ability to create up to 16 inputs and outputs is added

    Features:

    • The list of prohibited characters for use in names is expanded. Slash symbol '/' is added.

    Drivers:

    • Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added
    • ITC. Driver for managing ITC conference system controllers is added
    • AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added
    • MyHome. Command formation when using single digit numbers in A-PL settings is fixed

    07/02/2024 iRidium Setup 1.3.62.0.36281

    Client (1.3.62.36281)

    • Navigation and interaction with items in the project interface with the help of hotkey combination on Windows are improved
    • The system of project autoupdate from the cloud is improved: a notification popup about the new version of the project, a window with the update progress and a notification window about completion of the update are added

    Drivers:

    • AVCiT. The ability to select video codec when switching a video signal source is added
    • Bus77. Thermostat. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetState and ThState = State, SetStatePID and ThStatePID = StatePID
    • Bus77. Blinds. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetPosition = Position
    • KNX Router Serial. The "ACK all telegrams" parameter for turning on the ACK response function from the server to all incoming telegrams from the KNX bus is added
    • Domintell. Support of the "DIN10V02" analog input module subdevice is added
    • Yealink. Support of the driver to control "Yealink meeting eye 600" is added
    • Yeelight. Support of the driver to control "Yeelight Pro S20 Mesh" is added

    Android (1.3.62:36245)

    • Support of navigation and interaction with items in the project interface using hardware keys of the AV-R device is added
    • The ability to intercept keystrokes on the AV-R device for use in a project is implemented

    System menu:

    • The setting of turning on/off the "Lift to wake" function is added for the AV-R device, this function controls automatic unlocking the device when it is picked up

    Server (1.3.62.36281)

    • AV Processor PX-VP100 (Advanced). The ability to scan devices from both Bus77 buses in iRidium Studio is added
    • Support of Cyrillic characters in the path to the server documents folder, which could lead to the impossibility of starting the server is added
    • The ability to use server events for tracking sunrise and sunset in scripts and project tokens is added
    • The frequency of launching schedules on the server, which could lead to the schedule being disabled is fixed

    Drivers:

    • AVCiT. The ability to select video codec when switching a video signal source is added
    • Bus77. Thermostat. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetState and ThState = State, SetStatePID and ThStatePID = StatePID
    • Bus77. Blinds. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetPosition = Position
    • KNX Router Serial. The "ACK all telegrams" parameter for turning on the ACK response function from the server to all incoming telegrams from the KNX bus is added
    • Domintell. Support of the "DIN10V02" analog input module subdevice is added
    • Yealink. Support of the driver to control "Yealink meeting eye 600" is added
    • Yeelight. Support of the driver to control "Yeelight Pro S20 Mesh" is added

    Studio (2.0.47.36281)

    • Universal import. Setting of Comunity control channel when importing SNMP driver is added

    Drivers:

    • Network drivers. The FullName parameter in the settings of control channels and feedback channels, displaying the full name of the channel with subdevices is added

    JavaScript editor:

    • Setting of the external script editor is moved to the Script tab in the iRidium Studio settings
    • Search for all scripts, including closed, case-insensitive ones is implemented
    • System of group password protection/removal of scripts is implemented

    Panel project

    • When changing the coordinates of a group of graphic items, relative positions between them are saved

    Server project

    • The SunRise and SunSet tokens with the help of which you can get the time of sunrise and sunset for the current coordinates are added
    • Routines. Adding a new condition or action below the highlighted line, not at the end of the block
    • Scheme editor. The ability to select the String data type in the IF(SEL) block is added

    Bus77 project:

    • The ability to scan both Bus77 lines connected to one AV Processor PX-VP100 (Advanced) is added
    • Valve. The "Tap controlled contacts" setting is added
    • Curtains/shutters. The "Stop" button and the "Control is blocked" state are added
    • Light sensor. After reflashing the device, the calibration value of the sensor is restored

    22/12/2023 iRidium Setup 1.3.61.0.35556

      Studio (2.0.46.35556)

      • Bugs fixed

      15/12/2023 iRidium Setup 1.3.61.0.35551

        Client i3 Pro (1.3.61.35551)

        • Bugs fixed

        13/12/2023 iRidium Setup 1.3.60.0.35545

        Studio (1.3.60.35545)

        Drivers

        • HDL Buspro Network. The Dry Contact 51Z subdevice is added link
        • Import from CSV files. At the next import settings of the channels which are already added will be renewed if the names of the channels are the same

        Panel project

        • The tool for adapting images to the item size to remove "the ladder" when showing in i3 Pro is added
        • Workspace. Switching to the «Hand» (dragging) mode with the help of the «Spacebar» hot key is added
        • Highlighting the content of the box when navigating in Tab in the tabs of item properties, commands and drivers is added
        • The remote control «AV-R» when selecting the project resolution is added
        • An image can be dragged from Gallery without highlighting it first
        • Static list. The following settings are added: HIT, ScrollBar (deactivation of scrolling the list of popups), End Indent (space from the bottom edge to the last popup)

        Server project

        • The «DB» tab is added for summary analysis of all tags written in the database

        JS editor

        • Editor workspace focus retention when switching between multiple projects is added
        • Ability to download several ready-made JS files simultaneously is added

        Bus77 project:

        • CO2 Sensor. Ability to configure the connection “When the CO2 norm is exceeded” with relays and binary indicators is added
        • Dimmer. Ability to create an On/Off dimmer connection with a master button is added
        • Thermostat. Settings for upper and lower temperature limits for modes is added
        • Restoring device mechanism configuration in case of unsuccessful firmware and after resetting the device updated
        • Сolor contrast between online and offline devices for easier identification increased
        • Sorting in the device tree occurs by the channel number on the device, and not alphabetically
        • The “+” button for adding events is no longer hidden, when changing the width of the “Connections” tab
        • Update of the gateway IP address in the project after clicking on the “Find device” button is added

        Client i3 Pro (1.3.60.35545)

        • For the debugging convenience messages about the end of the license validity period is shown not more frequently than once in a second

        Graphic items

        • ITEM_PICKER. The Position parameter is added. It enables receipt of the current position of the first visual item of the drum link


        Drivers

        • HDL Buspro Network. Codes for controlling the light temperature when working with the HDL/DALI gateway are added
        • Kramer 3000. Support of the driver is implemented
        • Lutron Homeworks QS. The OUTPUT link and HVAC link commands are added
        • MyHome Network (Beta). The range of values for A and Pl parameters is extended which widens the range of control devices link
        • SIP. The Preview status is added when using the Preview Mode
        • URRI. Support of the driver is implemented
        • HTTP. Digest authentication is improved: support of "qop" is added


        JavaScript

        • In the IR.HideAllPopup() method you can inicate the animation you want to use when closing a group of popups link
        • Functionality of the IR.IsModuleLicensed() method is extended to check if there is support of the AV&Custom System driver in the license when implementing custom drivers on the basis of AV&Custom System link


        Server (1.3.60.35545)

        Drivers

        • Google home. Support of the Curtain subdevice is added link
        • HDL Buspro Network. Codes for controlling the light temperature when working with the HDL/DALI gateway are added
        • Kramer 3000. Support of the driver is implemented
        • Legrand Netatmo. Support of the driver is implemented link
        • Lutron Homeworks QS. The OUTPUT link and HVAC link commands are added
        • MyHome Network (Beta). The range of values for A and Pl parameters is extended which widens the range of control devices link
        • URRI. Support of the driver is implemented
        • Yandex Alice Platform. Possibility to stop the curtains with the comand «Pause the curtains» and the «Pause»feedback channel for monitoring the curtains are added
        • ZONT. Support of the driver is implemented link
        • HTTP.Enhanced Digest Authentication has been implemented, with support for the qop parameter

        18/10/2023 iRidium Setup 1.3.59.0.34184

        Client (1.3.59.34184)

        Licensing

        • The possibility to select Offline licence mode for objects without internet access is added link
        Server (1.3.59.34184)

        Licensing

        • Licensing. The possibility to select Offline licence mode for objects without internet access is added link

        Web-interface

        • The possibility to select a local file to update the server if the link update is not available is added link

        Offline licensing

        • The possibility to deactivate the server via the web-interface is added link
        • The delay mechanism between attempts to enter PIN and PUK codes to prevent quick blocking of the web-interface as a result of unsuccessful attempts is added link

        11/10/2023 iRidium Setup 1.3.58.0.33856

        iRidium Studio 2019 (2.0.43.33856)

        Bus77 проект:

        • Assignment of individual device identifiers (LIDs) during scanning is fixed

        26/09/2023 iRidium Setup 1.3.58.0.33844

        iRidium Studio 2019 (2.0.43.33844)

        Drivers:

        • Displaying of parameters of Modbus Network driver is fixed

        21/09/2023 iRidium Setup 1.3.58.0.33839

        iRidium Studio 2019 (2.0.43.33839)

        Bus77 project:

        • The setting for calibration of the Leak Sensor is added link

        18/09/2023 iRidium Setup 1.3.58.0.33811

        iRidium Studio 2019 (2.0.43.33811)

        Drivers:

        • AV & Custom Systems. Ability to copy and paste commands and feedback between AV drivers is added
        • BlueSound. Additional index parameter for inputs is added
        • Bus77 Network. Saving Bus77 driver parameters when synchronizing with the Bus77 project is implemented
        • HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added link
        • Helvar NET. Ability to create a driver from a CSV file uploaded from the Designer application is added link

        Panel project:

        •  When you select a page or popup in the Projects tree, all commands and feedbacks used on them in the Devices tree are highlighted
        • Alignment of elements relative to one element / group of elements, selected last with Ctrl (requires enabling in settings) is added link
        • Ability to select preset project resolutions for iRidi panels (P6, P8, P10) is added

        Server project:

        • Routines. Saving the width of the columns inside the Routine between openings is added
        • Routines. Bus77 Network. Ability to use the events of the Bus77 driver in conditions is added (for example, by double tapping Bus77 button, turn on KNX lamp) link

        Bus77 project:

        • Support for customizing the HSV indicator (RASIM and COURTIER devices) is added link
        • Arrows for moving Bus77 devices to change the sorting of devices in the tree is added
        • By default, the Device tree in the "Connections and Logic" tab and in the "Connections" window is collapsed to the device level
        • The Studio stops polling the Bus77 bus when switching to another project
        • Thermostat. Manual selection of the "Error" mode is blocked, now it will only appear with a real error from the device
        • FM-808. The behavior at start can be either «On» or «Off» only
        • Global scenes. Minor changes are made
        Client (1.3.58.33811)

        Drivers:

        • HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added link

        Items:

        • Editbox. The error of showing the cursor on the wrong (not highlighted) line is fixed
        Server (1.3.58.33811)

        Drivers:

        • BlueSound. The parameter of setting up commands for selecting the number of the input on the device (Index) is added link
        • HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added link
        • Yandex Alice Platform. The support of the "Alice for Hotels" add-on enabling binding of up to 25 different accounts to 1 server project is added link

        Web interface:

        • The Connect / Disconnect button for drivers in the "Drivers" tab is added link
        • The possibility to update the iRidium Server application by the redirect link from the iRidi web site is added

        22/08/2023 iRidium Setup 1.3.57.0.33241

        iRidium Studio 2019 (2.0.42.33241)

        • Support of ProAV Control Processor (PX-VP100-Advanced) is added link
        • Bus77 Network driver. The Keep alive parameter which sets the frequency of checking the connection with the gateway is added link

        Client (1.3.57.33241)

        • Support of ProAV Control Processor (PX-VP100-Advanced) is added link

        Server (1.3.57.33241)

        • Support of ProAV Control Processor (PX-VP100-Advanced) is added link
        • Bus77 Network driver. The Keep alive parameter which sets the frequency of checking the connection with the gateway is added link

        17/07/2023 iRidium Setup 1.3.56.0.33144

        iRidium Studio 2019 (2.0.41.33144)

        • Bus77 project. The "Make Brighter/Darker from 1 Button" link for Dimmers and DALI Dimmers is added link
        • Server project. An option is added to quickly configure drivers using Serial protocol on iRidi equipment link
        • Server project. Routines. Saving of column widths when editing rules is added
        • Drivers. The "AVCiT" driver is added link
        • Drivers. The "BSS Harman" driver is added link

        Client (1.3.56.33144)

        • Drivers. Support of the "AVCiT" driver is added link
        • Drivers. Support of the "BSS Harman" driver is added link

        Android (1.3.56.33117)

        • Touch Panel P6. Support of the panel is added
        • Touch Panel P6 P8 P10. An option is added to change project orientation from system menu

        Server (1.3.56.33144)

        • Drivers. Support of the "AVCiT" driver is added link
        • Drivers. Support of the "BSS Harman" driver is added link
        • Drivers. Support of the "ProAV Control Processor" driver is added link
        • Support of the AV Processor PX-VM20-Basic device is added link
        • Drivers. AV&Custom System (Serial). Support of the "HRDW Flow Control" for RS-232 on the AV Processor PX-VM20-Basic device is added link
        • Drivers. Yandex Alice Platform. An option is added to edit the device track range in "Media" devices is added link

        20/06/2023 iRidium Setup 1.3.55.0.32640

        iRidium Studio 2019 (2.0.40.32640)

        • Drivers. The Somfy driver is added link
        • Drivers. Lutron QS Beta. The Set Current Temperature (°C) command is added link
        • Panel project. The ability to move the workspace left-right with the touchpad is added
        • Server project. Routines. The saving of the position of the Delay macro in the Then field is fixed
        • Script Editor. The highlighting of paired brackets after the "/" symbol is fixed
        • Bus77 project. I-CAN-DALI. The ability to set up connections for groups, without any devices in them yet, is added link
        • Bus77 project. I-CAN-DALI. The Blink parameter logic is changed link
        • Bus77 project. I-CAN-DALI. The support of DT8 subdevices is added: TW, RGB, RGBW link
        • Bus77 project. The schedule settings window for Thermostat, Blinds, Relay is added
        • Bus77 project. The option to indicate minutes and seconds for the «Shutdown delay» setting of the Movement sensor is added
        • Bus77 project. The Bus77 mechanism for scanning the bus is improved
        • Bus77 project. The Date and time column is added to the Firmware window, firmware is sorted by date and organized by firmware profiles

        Client (1.3.55.32640)

        • Drivers. Lutron QS Beta. Support of the "Set Current Temperature (°C)" command is added link
        • Drivers. BACNet. The "SetSubDeviceParam" and "GetSubDeviceParam" script methods are added link
        • Drivers. Bus77. Support of the CAN-DALI gateway is added: DT8 control: TW, RGB, RGBW link

        Server (1.3.55.32640)

        • Drivers. Lutron QS Beta. Support of the Set Current Temperature (°C) command is added link
        • Drivers. BACNet. The SetSubDeviceParam and GetSubDeviceParam script methods are added link
        • Drivers. Support of the Somfy driver is added link
        • Drivers. Bus77. Support of the CAN-DALI gateway is added: DT8 control: TW, RGB, RGBW link
        • Drivers. Bus77. Support of the CAN-DALI gateway is added: display of device and lamp errors link
        • Drivers. Yandex Alice Platform. Improvements of the service to use sensors in Alice scenes
        • Database. The ability to activate the automatic cleaning of the database is added link

        03/04/2023 iRidium Setup 1.3.54.0.31549

        iRidium Studio 2019 (2.0.39.31549)

        • Panel project. Work with a group of items. Attaching items to guidepath and moving items when holding on any point within the highlighted area link
        • Panel project. Routines. New macros are added: Edit routine settings (to edit without showing the whole list of routines), Show list of all routines (available for editing) link
        • Server project. Routines. Search by routines is added
        • Server project. Routines. General properties for the «Edit from panel» and «Active on server» routines are added
        • Panel and server projects. Fast jumping to a device in the Bus77 project from the projects which are related to the device by using the RMB link
        • Bus77 project. Support of the CAN-DALI gateway is added: setting up and control of LED dimmers and groups link
        • Bus77 project. Support of subdevices is added: Current sensor, Resistance sensor, Voltage sensor, Voltage regulation link
        • Bus77 project. Movement sensor. Support of minutes (old firmware versions) and seconds (new firmware versions) for the «Shutdown delay» setting is added link
        • Bus77 project. Movement sensor. Sections are added in the «States» settings: «State for lighting», «Value»

        Client (1.3.54.31549)

        • Drivers. Support of the Vinteo driver is added link
        • Drivers. Support of the iEAST driver is added link
        • Routines. New macros are added: Edit routine settings (to edit without showing the whole list of routines), Show list of all routines (available for editing)

        Android (1.3.54.31501)

        • Support Touch Panel P8 is added link

        Server (1.3.54.31549)

        • Drivers. Support of the Vinteo driver is added link
        • Drivers. Support of the iEAST driver is added link
        • Drivers. Yandex Alice Platform. Possibility to use sensors in Alice scenes is added link

        14/02/2023 iRidium Setup 1.3.53.0.30825

        iRidium Studio 2019 (2.0.38.30825)

        • Bus77 project. The «Relay» subdevice. The «Relay inversion» setting is added link
        • Bus77 project. The new «Voltage Control» subdevice is added link
        • Server project. Rules. The button for cancelling all changes in the «Rule» window is added link
        • Drivers. The WyreStorm driver is added link
        • Drivers. The Digibird driver is added link
        • Drivers. The AV & Custom Systems (SSH) driver is added link

        Client (1.3.53.30825)

        • Drivers. Support of the WyreStorm driver is implemented link
        • Drivers. Support of the Digibird driver is implemented link
        • Drivers. Support of the AV & Custom Systems (SSH) driver is implemented link

        Server (1.3.53.30825)

        • Drivers. Support of the WyreStorm driver is implemented link
        • Drivers. Support of the Digibird driver is implemented link
        • Drivers. Support of the AV & Custom Systems (SSH) driver is implemented link

        17/01/2023 iRidium Setup 1.3.52.1.30424

        iRidium Studio 2019 (2.0.37.30424)

        • Bus77 project. The "States" section for subdevices is added. It shows the current state and errors of subdevices. link
        • Bus77 project. Possibility to calibrate the light sensor is added. link
        • Bus77 project. Possibility to set up "Master-Slave" for motion sensor is added.link
        • Bus77 project. List of commands and feedback channels for the "HSV dimmer" subdevice is changed. link
        • Bus77 project. Automatic scanning of the line when creating a new project is added. link

        30/11/2022 iRidium Setup 1.3.52.0.30278

        iRidium Studio 2019 (2.0.36.30278)

        • Bus77 Project. Displaying of «Report rate of the line» for gateways is added link
        • Bus77 Project. Support of Scenes is added link
        • Bus77 Project. Support of Global Scenes is added link
        • Bus77 Project. Support of the Scene Switch mode is added for the «Button» subdevice link
        • The list of functions in the prompter of the JS editor is expanded link
        • Possibility to copy all states of the item style via the RMB menu is added link
        • Possibility to move items in the project tree by the D&D method is added link

        Client (1.3.52.30278)

        • Items. Advanced List. The "Stop by Tap" setup is added link
        • Drivers. Support of the "Televic Conference" driver is added link
        • Drivers. Support of the "SpinetiX" driver is added link
        • Drivers. Support of the "Satel Integra Network" driver is added link

        Server (1.3.52.30278)

        • Drivers. Support of the "Televic Conference" driver is added link
        • Drivers. Support of the "SpinetiX" driver is added link
        • Drivers. Support of the "Satel Integra Network" driver is added link
        • Drivers. Z-Wave. Support of the "Aeotec WallMote" scene switch is added link

        15/11/2022 iRidium Setup 1.3.51.1.30061

        iRidium Studio 2019 (2.0.35.30061)

        • Bus77. DM-1400 support added link
        • Bus77. Thermostat. PID control mode support added link
        • Bus77. Line polling frequency for IS-CAN display added link

        Server (1.3.51.30061)

        • Bugs fixing

        28/10/2022 iRidium Setup 1.3.51.0.29741

          Client (1.3.51.29740)

          • Bugs fixing

          Server (1.3.51.29740)

          • Bugs fixing

          26/10/2022 iRidium Setup 1.3.50.0.29728

          iRidium Studio 2019 (2.0.34.29728)

          • Possibility to move (by D&D) "Project Token" to the "Relations" and "Command" sections of the "Programming" window is added link
          • Dynamic images. The "Disconnect when minimized" setting is added link

          Client (1.3.50.29728)

          • Dynamic images.Support of the "Disconnect when minimized" setting is added link
          • Drivers. Support of the "Kramer VIA" driver is added link
          • Drivers. Support of the "Biamp Tesira" driver is added link
          • Drivers. Support of the "Novastar" driver is added link

          Server (1.3.50.29728)

          • Drivers. Support of the "Kramer VIA" driver is added link
          • Drivers. Support of the "Biamp Tesira" driver is added link
          • Drivers. Support of the "Novastar" driver is added link

          05/10/2022 iRidium Setup 1.3.48.0.29463

          Client (1.3.48.29495)

          • The problem with UDP Broadcast on iOS 16 is fixed

          15/09/2022 iRidium Setup 1.3.47.1.29461

          iRidium Studio 2019 (2.0.33.29461)
          • Bus77 project and driver. Support of subdevices is added:
            • Curtains/Shutters
            • HSV dimmer
            • Pressure sensor
            • VOC sensor
            • Noise sensor
            • Diode
          • Bus77 project. Support of the Master button mode is added for Button
          • JS. Icons for statuses in pasword-protected scripts are added
          • Support of HDL MDT06015.533;HDL-MC64-DALI.431 is added

          02/09/2022 iRidium Setup 1.3.47.0.29357

          Client (1.3.47.29357)

          • Bugs fixing

          Server (1.3.47.29357)

          • Bugs fixing

          26/08/2022 iRidium Setup 1.3.46.0.29323

          iRidium Studio 2019 (2.0.32.29323)

          • Bugs fixing

          Client (1.3.46.29323)

          • Bugs fixing

          Server (1.3.46.29323)

          • Bugs fixing

          24/08/2022 iRidium Setup 1.3.45.0.29317

          iRidium Studio 2019 (2.0.31.29317)

          • Drivers. KNX Router (KNXnet/IP) / Serial (UMC). The new subtype for channels is added - ‘7.600 Absolute colour temperature’
          • Possibility to create ‘Bus77’ projects is added link

          Client (1.3.45.29317)

          • PJLink. Volume control is added link
          • Drivers. Support of the ‘Panasonic PTZ’ driver is added link

          Server (1.3.45.29317)

          • PJLink. Volume control is added link
          • Drivers. Support of the ‘Panasonic PTZ’ driver is added link
          • Sber Salut. The following subdevices are added: link

                            - Radiator/heater

                            - Floor heating

                            - LED strip

                            - Opening sensor

                            - Motion sensor

                            - Relay

                            - Temperature and humidity sensor

                            - Blinds/Shutters

                            - Curtains

                            - Fan

                            - Scene switch

          • Licence. Support of local licensing of projects is added

          27/06/2022 iRidium Setup 1.3.44.0.28482

          iRidium Studio 2019 (2.0.30.28482)

          • Import. The "Bus77 Project import" is added link

          Client (1.3.44.28482)

          • Drivers. Support of the "Bus77" driver is added link

          Server (1.3.44.28482)

          • Drivers. Support of the "Bus77" driver is added link

          20/06/2022 iRidium Setup 1.3.43.0.27870

          iRidium Studio 2019 (2.0.29.27870)

          • Schemes. The "Sel" block-scheme is added link
          • Setup of processing for the "\n\r" line break symbols is added in the Text property of an item link
          • Possibility to change the item size for the size of an image on it is added 

          Client (1.3.43.27870)

          • Drivers. Support of the "Lutron QSX" driver is added
          • Drivers. "Z-Wave.Me". Support of work by the remote token
          • Drivers. Helvar. Support of feedback channels is added: Query Device Is Disabled, Query Lamp Failure, Query Device Is Failure, Query Device Is Missing. link

          Server (1.3.43.27870)

          • Drivers. Support of the "Lutron QSX" driver is added
          • Drivers. "Z-Wave.Me". Support of work by the remote token
          • Drivers. Helvar. Support of feedback channels is added: Query Device Is Disabled, Query Lamp Failure, Query Device Is Failure, Query Device Is Missing. link

          03/06/2022 iRidium Setup 1.3.42.0.27748

          Client (1.3.42.27748)

          • Fixing bugs

          Server (1.3.42.27748)

          • Fixing bugs

          31/05/2022 iRidium Setup 1.3.41.0.27738

          Client (1.3.41.27738)

          • Fixing bugs

          Server (1.3.41.27738)

          • Fixing bugs

          17/05/2022 iRidium Setup 1.3.40.0.27726

          iRidium Studio 2019 (2.0.28.27726)

          • Possibility to copy the Virtual driver between the projects is added link
          • The window for setting up the Advanced List item is modified link
          • Possibility to change the size of a group of items is added link

          Client (1.3.40.27726)

          • The "Cancel download" button is added when downloading projects from the cloud link
          • Support of "ETS Remote" is added link
          • Support of the Z-Wave.Me driver is added
          • Fixing bugs

          Server (1.3.40.27726)

          • UMC. Support of "ETS Remote" is added link
          • Support of the Z-Wave.Me driver is added
          • Fixing bugs

          13/04/2022 iRidium Setup 1.3.39.0.27478

          iRidium Studio 2019 (2.0.27.27478)

          • Drivers. Ajax Network.Support of new subdevices is added link
          • Drivers. Yandex Alice Platform. Support of new subdevices is added link
          • Setting up of the template for text displaying on the Button item at D&D [Command, Feedback,Token] in the workspace of the panel project is added. link
          • Opening of the server project from the menu of the panel project tab is added. link
          • A new way of project scaling to display the "Page;Popup" items in the workspace is added. (ZoomToFit) link
          • The hot keys Ctrl+ (+/-/0) for changing the project scaling are added. link
          • The button for activating the window for creating animation from the General tab of the popup is added. link
          • The window for selecting several popups to be displayed on the page is added. link
          • The window of popup selection for the "Static List" item is modified. link

          Client (1.3.39.27478)

          • Fixing bugs

          Server (1.3.39.27478)

          • Drivers. Ajax Network.Support of new subdevices is added link
          • Drivers. YandexAlicePlatform. Possibility of work with sensors is added link

          01/04/2022 iRidium Setup 1.3.38.0.27261

          Client (1.3.38.27261)

          • Bugs fix

          Server (1.3.38.27261)

          • Bugs fix

          28/03/2022 iRidium Setup 1.3.37.0.27254

          Client (1.3.37.27254)

          • Bugs fix

          Server (1.3.37.27254)

          • Bugs fix

          21/02/2022 iRidium Setup 1.3.36.0.27163

          iRidium Studio 2019 (2.0.26.27163)

          • Support of Drag&Drop for feedbacks from the Devices tree to the Relations area (the Programming window) is added link
          • The "Hand" tool for moving the working area of the panel project is added link
          • Highlighting of group addresses when importing from the ETS project ( "by the building structure" like in the ETS Import panel) is added link
          • Drivers. Support of the "Philips Dynalite" driver is added link
          • Serbian language is added

          Client (1.3.36.27163)

          • Items.EditBox. Possibility of text highlighting and operations "Cut","Copy" and "Delete" are added
          • Drivers. Support of the "Philips Dynalite" driver is added link

          Server (1.3.36.27163)

          • Drivers. Support of the "Philips Dynalite" driver is added link
          • Drivers. Sber Salut. Support of the HVAC subdevice is added link (Only russian) link

          10/12/2021 iRidium Setup 1.3.35.0.26916

          iRidium Studio 2019 (2.0.25.26916)

          • Bug fixes

          Client (1.3.35.26916)

          • Bug fixes

          Server (1.3.35.26916)

          • Bug fixes

          6/12/2021 iRidium Setup 1.3.34.0.26848

          iRidium Studio 2019 (2.0.24.26834)

          • Saving of the scaling for displaying a project in Studio is added for each project separately
          • The "Delete, All relation and command" function is available via "RMB" for groups of graphic items
          • Support of fractional spacing for fonts is available link
          • Support of indents for texts in items is available link
          • Possibility to use "Forward value to" for driver tokens is added

          Client (1.3.34.26834)

          • Drivers. BACNet Network. Mode selection for update of variables is added

          Server (1.3.34.26838)

          • Drivers. Support of the "Sber Salut" voice assistant is added (Only russian) link
          • Drivers. Support of the "Mail Marusya" voice assistant is added (Only russian) link
          • Drivers. Support of the "Ajax Network" driver is added
          • Linux. Support of NVMe discs is added
          • Drivers. BACNet Network. Mode selection for update of variables is added
          • Support of Raspberry Pi 4 Model B is added link

          25/10/2021 iRidium Setup 1.3.33.0.26283

          iRidium Studio 2019 (2.0.23.26283)

          • Items. Tokens filled, empty are added for level, circular level, multistate level, multistate circular level items link
          • Items. Support of switching the item states on the Projects panel (the States tab) is added link
          • Items. The template for outputting fractional values ($F,1..$F,5) is added, so that the separator character of the fractional part is a comma link
          • Items. The default behaviour of the Up/Down button item is changed (without без built-in connections) link
          • JS editor. Text search by closed scripts (not only by open ones) is added
          • JS editor. Possibility to scroll the script window below the last text line (like in Visual Studio) is added
          • JS editor. Tabulation setup is added link
          • Schemes. Auto creation of the scheme template when dragging a scheme block to an empty workspace is added link
          • Schemes. Possibility to select the number of outputs for the "Duplicate" block is added link
          • System tokens. Application. The “Clear Project Tokens” token is added (available for writing only) link
          • Possibility to paste images from the exchange buffer to the workspace and project resources is added link
          • Support of proportional scaling when importing a vector based image is added link
          • Possibility to move the page across the workspace to work in negative coordinates is added link
          • Possibility to copy all auxiliary guiding lines form one page to another is added link
          • Possibility of multiple selection and moving popups with Ctrl/Shift in the editor of the popup groups is added link

          Client (1.3.33.26283)

          • Drivers. TIS Network. Support of new subdevices is added: Media control, Thermostat, Logic 4T sensor, Logic Health sensor, Logic PIR sensor, Logic 10F sensor, Digital input, Floor Heating, Universal Switch Project, Universal Switch DVD, Universal Switch IPTV, Universal Switch TV Box, Universal Switch TV, RGB link
          • Drivers. Tion Network. Support of the "Zone sensor" subdevice is added + minor improvements link
          • Drivers. Support of the "Onvif Network" driver is added link
          • Support of the “Clear Project Tokens” system token and the JS method IR.ClearProjectTokens() for resetting the current values to the default ones is added link

          Server (1.3.33.26283)

          • Drivers. ZigBee. Support of "Danfos" equipment is added link
          • Drivers. ZigBee. Support of USB memory sticks is added: "Nortek HUSBZB-1", "Elelabs Zigbee USB Adapter", "DEFARO SprutStick Pro". link

          31/08/2021 iRidium Setup 1.3.32.0.25676

          iRidium Studio 2019 (2.0.22.25676)

          • Universal import from JS. The ability to import virtual variables is added link
          • The ability to open the "Forward Value To - Object Selection" window by clicking "Enter" is added
          • Closing of tabs (scripts, projects) by the middle mouse button is added
          • Drivers. HDL Buspro Network. Operation codes for working with the Granit panel are added

          Client (1.3.32.25676)

          • JavaScript. IR.CalculateHash. Support of the algorithms hmac_md5, hmac_sha1, hmac_sha256, hmac_sha384, hmac_sha512 is added link
          • JavaScript. Support for working with a byte array in the JS methods IR.Base64Encode and IR.Base64Decode is added
          • Drivers. Domintell. Support of hardware (QG2; EV1; DX2; DPBC01; DPBC02; DPBC04; DPBC06) is added
          • Drivers. Domintell. The ability to adjust the delay between sent commands is added
          • Drivers. Crestron. Support of SSL authentication for processors 3 (with firmware 1.6+) and 4 series is added
          • Drivers. Crestron. The ability to send the Serial type commands with Unicode support for new types of connections is added
          • Drivers. HDL Buspro Network. Support of Granit panel is added

          Server (1.3.32.25676)

          • JavaScript. IR.CalculateHash. Support of the algorithms hmac_md5, hmac_sha1, hmac_sha256, hmac_sha384, hmac_sha512 is added link
          • JavaScript. Support for working with a byte array in the JS methods IR.Base64Encode and IR.Base64Decode is added
          • Drivers. Domintell. Support of hardware (QG2; EV1; DX2; DPBC01; DPBC02; DPBC04; DPBC06) is added
          • Drivers. Domintell. The ability to adjust the delay between sent commands is added
          • Drivers. Crestron. Support of SSL authentication for processors 3 (with firmware 1.6+) and 4 series is added
          • Drivers. Crestron. The ability to send the Serial type commands with Unicode support for new types of connections is added
          • Drivers. ZigBee. Support of Xiaomi Aqara hardware is added
          • Drivers. ZigBee. The support of Legrand Netatmo is added
          • Drivers. HDL Buspro Network. Support of Granit panel is added

          07/07/2021 iRidium Setup 1.3.31.0.25286

          iRidium Studio 2019 (2.0.21.25286)

          • Drivers. iNels. GROUP DIGITAL control command is realized.

          • Drivers. Intesis driver is added link

          • Drivers. TV LG WebOS driver is added link

          • Drivers. Support of KNX USB interface (KNX HID) is added link

          • A capability to change fonts in a whole project is added.

          • A capability to turn on/off a group of scripts is added (JS editor). 

          • Display of individual addresses of BAOS devices in the synchronization menu of ETS with a project is added.

          • Bugs fixes.

          Client (1.3.31.25286)

          • Drivers. iNels.GROUP DIGITAL control command is realized.

          • Drivers. Intesis driver is added link

          • Drivers. TV LG WebOS driver is added link

          • Drivers. Support of KNX USB interface (KNX HID) is added link

          • Drivers. Bluesound. Processing the feedback of the Play event is added.

          • Use of the HMAC SHA-256 encryption method is realized in scripts.

          • Bugs fixes.

          Server (1.3.31.25286)

          • Drivers. iNels. GROUP DIGITAL control command is realized.

          • Drivers. Intesis driver is added  link

          • Drivers. TV LG WebOS driver is added link

          • Drivers. Support of KNX USB interface (KNX HID) is added link

          • Drivers. Bluesound. Processing the feedback of the Play event is added.

          • Drivers. ModBus. Support of server monitoring of messages in the Modbus bus is added (Direct RS-485 and TCP connection).

          • Use of the HMAC SHA-256 encryption method is realized in scripts.

          • Bugs fixes

          Site

          • Drivers. AMX. A capability to turn on/off "Single Beep" during import of TP4 projects via an account (web-interface) is added.

          16/06/2021 iRidium Setup 1.3.30.0.24942

          iRidium Studio 2019 (2.0.20.24942)

          • Drivers. Samsung TV fixes
          • Other non-critical fixes

          Client (1.3.30.24942)

          • Drivers. Modbus fixes
          • Drivers. Samsung TV fixes
          • Other non-critical fixes

          Server (1.3.30.24942)

          • Drivers. Modbus fixes
          • Drivers. Samsung TV fixes
          • Other non-critical fixes

          31/05/2021 iRidium Setup 1.3.29.0.24874

          iRidium Studio 2019 (2.0.19.24874)

          • Drivers. HDL Buspro Network. Support of commands containing Operation code - "Floor Heating Control (DLP)" for the "Enviro" panel is added link
          • Drivers. Support of the "Wake-on-LAN" driver is added link
          • Drivers. Support of the "EIDE" driver is added
          • Drivers. Support of the "Xicato" driver (to control equipment via the IP gate) is added
          • Drivers. Support of the "Bluesound" driver is added link
          • Drivers. Yamaha Network. Minor improvements are made after testing the drive on models "Yamaha WX-021" и "WX-051"
          • Drivers. Helvar. Support of decimal values for the "Direct Level Group" & "Direct Level Device" commands is added
          • Drivers. Larnitech. Support of the "CO2 sensor" is added link

          Client (1.3.29.24874)

          • Drivers. HDL Buspro Network. Support of commands containing Operation code - Floor Heating Control (DLP) for the Enviro panel is added link
          • Drivers. Support of the Wake-on-LAN driver is added link
          • Drivers. Support of the EIDE driver is added
          • Drivers. Support of the Xicato driver (to control equipment via the IP gate) is added
          • Drivers. Support of the Bluesound driver is added link
          • Drivers. Yamaha Network. Minor improvements are made after testing the drive on models Yamaha WX-021 и WX-051
          • Drivers. Helvar. Support of decimal values for the Direct Level Group & Direct Level Device commands is added
          • Drivers. Larnitech. Support of the CO2 sensor is added link

          Server (1.3.29.24874)

          • Drivers. HDL Buspro Network. Support of commands containing Operation code - Floor Heating Control (DLP) for the Enviro panel is added link
          • Drivers. Support of the Wake-on-LAN driver is added link
          • Drivers. Support of the EIDE driver is added
          • Drivers. Support of the Xicato driver (to control equipment via the IP gate) is added
          • Drivers. Support of the Bluesound driver is added link
          • Drivers. Yamaha Network. Minor improvements are made after testing the drive on models Yamaha WX-021 и WX-051
          • Drivers. Helvar. Support of decimal values for the Direct Level Group & Direct Level Device commands is added
          • Drivers. Larnitech. Support of the CO2 sensor is added link

          Site

          • The "Strizh" JS module is added link

          11/05/2021 iRidium Setup 1.3.28.0.24432

          iRidium Studio 2019 (2.0.18.24432)

          • Drivers. The "PJLink" driver is added
          • Bugs fixes

          Client (1.3.28.24432)

          • Drivers. Support of "PJLink" driver is added
          • Launch speed of i3Pro app is increased
          • Bugs fixes

          Server (1.3.28.24432)

          • Drivers. Support of "PJLink" driver is added
          • Bugs fixes

          14/04/2021 iRidium Setup 1.3.27.0.24322

          iRidium Studio 2019 (2.0.17.24322)

          • Localization for French language in the studio interface is updated
          • Drivers. The "Amazon Alexa (v3) Network" driver is added
          • Yandex Alice Platform. Added commands:

                    - "Humidity" for the "Thermostat" and "Conditioner" subdevices link

                    - "TemperatureCelsius" for the "Air humidifier" subdevice link

                    - "Range" for the "Blinds" subdevice link

                    - The RGB channel is removed from the "Lamp" device. The new "RGB lamp" subdevice is added link

          • KNX. The subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added link
          • Drivers. The "Samsung TV" driver for R/Q series is added link

          Client (1.3.27.24320)

          • KNX. Support of subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added link
          • Drivers. Support of the “Samsung TV” driver for R/Q series is added link
          • SIP. The "Automatic gain control" setting is added link

          Server (1.3.27.24320)

          • Drivers. Support of the “Amazon Alexa (v3) Network” driver is added
          • Voice assistants (YandexAlice,GH,Alexa). Possibility to work via the new skill - “iRidium Assistant” - is added
          • Yandex Alice Platform. Added commands:

                     - "Humidity" for the "Thermostat" and "Conditioner" subdevices link

                     - "TemperatureCelsius" for the "Air humidifier" subdevice  link

                     - "Range" for the "Blinds" subdevice link

                     - The RGB channel is removed from the "Lamp" device. The new "RGB lamp" subdevice is added link

          • KNX. Support of subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added link
          • Drivers. Support of the “Samsung TV” driver for R/Q series is added link

          22/03/2021 iRidium Setup 1.3.26.0.24029

          iRidium Studio 2019 (2.0.16.24029)

          • Driver. Yandex Alice Platform.  The "Use name" parameter for subdevices is added link
          • The native Yamaha driver is added link
          • Auxiliary guides for aligning elements are added link
          • Opening of the Dropdown menu by presssing "RMB" is added for the tools "Draw","Item Position","Align","Spacing","Text align","Grid"

          Client (1.3.26.24029)

          • iOS. Support of Face ID is added link
          • Drivers. Support of Yamaha driver is added link
          • JS. Possibility to activate/deactivate the proximity sensor on iOS and Android devices is added link
          • Drivers. Larnitech. Speed of the driver work is increased

          Server (1.3.26.24029)

          • Drivers. Support of Yamaha driver is added link
          • Drivers. Yandex Alice Platform. Support of the "Device name" parameter for subdevices is added link
          • JS. Possibility to connect the Amazon Alexa voice assistant to an iRidium project via scripts is added link
          • Drivers. Larnitech. Speed of the driver work is increased

          8/02/2021 iRidium Setup 1.3.25.0.23568

          iRidium Studio 2019 (2.0.15.23568)

          • Support of user databases from the old studio versions (.*irdb) is improved - Display of folders for serials of devices is added;
          • Possibility to set up editable server routines is added ; link
          • The "TextArea" item is added; link
          • Possibility to select addresses from the panel of ETS import (for data synchronization) is added ; link
          • The "indent" property is added for "Static List"; link
          • Possibility to transfer sounds from one project to another is added; link
          • Camera can be selected in the item properties in the "Image" field now.

          Client (1.3.25.23561)

          • Drivers. AV&Custom systems (HTTP). Possibility to send the "DELETE" and "PATCH" type requests is added;
          • Drivers. BacNet Network. Possibility to setup time of re-subscribing the driver;
          • Drivers. HDL Buspro Network. Support of Operation code: Read Status of Channels (DALI) is added;
          • Possibility to edit server routines from the panel project is added. link

          Server (1.3.25.23561)

          • Drivers. AV&Custom systems (HTTP). Possibility to send the "DELETE" and "PATCH" type requests is added;
          • Drivers. BacNet Network. Possibility to setup time of re-subscribing the driver;
          • Drivers. HDL Buspro Network. Support of Operation code: Read Status of Channels (DALI) is added;

          14/12/2020 iRidium Setup 1.3.24.1.22973

          iRidium Studio 2019 (2.0.14.22973)

          • Added the ability to select scripts to transfer to a server project when creating it based on a panel project;
          • Added automatic setting of the "send value by hold" value to the "send value by" property of the "trigger button" element when using the "hold" event;
          • Added the ability to disable rulers in schemes;
          • Added the ability to choose to add / not add Single Beep sound when importing "TP4" project into the studio;
          • Added the ability to adjust the step for the "Level" item;
          • Added the ability to copy folders via the "RMB" context menu in the project tree;
          • Added the ability to change the name of scripts with the "F2" key;
          • Added hotkeys for "Copy Style State" and "Paste Style State";
          • Added "RTL" support for Arabic;
          • Added the ability to customize the "Pie Chart" from the editor (without knowing "JS");
          • Improved the "Vertical Center Align" tool;
          • Fixed "Scale to Fit" parameter for importing "(AMX) TP5" projects into studio;
          • Added "Drag Drop" items inside the schedule window and the routine window;
          • Added search for "ETS" import window.

          25/11/2020 iRidium Setup 1.3.24.0.22733

          iRidium Studio 2019 (2.0.13.22397)

          • Drivers. The TION driver is added link
          • Drivers. AV&Custom System (HTTP). Capability to select Digest authentication in driver settings is added link
          • Drivers. Sonos. The "Sonos groups" driver is added to work with grouping players link

          Client (1.3.24.22733)

          • Javascript. Support of methods for working with item animation is added link
          • Drivers. Sonos. Capability to work with grouping players is added link
          • Drivers. AV&Custom System (HTTP). Capability to work with Digest authentication is added link
          • Drivers. Support of the TION driver is added link
          • iRidium P7-PoE. Support of methods for side lighting control is added link

          Server (1.3.24.22733)

          • Drivers. Sonos. Capability to work with grouping players is added link
          • Drivers. AV&Custom System (HTTP). Capability to work with Digest authentication is added link
          • Drivers. Support of the TION driver is added link

          11/11/2020 iRidium Setup 1.3.23.1.22386

          iRidium Studio 2019 (2.0.13.22386)

          • hotkeys Ctrl + C and Ctrl + V now work in the Project tree
          • events in the Programming window can now be minimized
          • when creating a Level item its Direction is selected automatically
          • the Close button (the cross) for dialog windows is added
          • the setting for indent size – Tab – is added in the script tools / options / script 
          • errors in the Domintel scanner are fixed
          • the RMB menu for the schedule window is improved
          • names in the i/o window for schemes are displayed in short now for better readability
          • folders can be renamed in the global sound gallery now
          • sounds from the global gallery can be drag’n’dropped into scripts 
          • popup size can be changed right after its unlocking now
          • the dialog window for command creating opens now when drag’n’dropping a command to the circular level
          • the horizontal scrolling by Shift + wheel is added in the script editor 
          • the Min, Max properties of the Level item can now be used in relations
          • import of Beckhoff ADS is added
          • the color selection window is improved (now you can select brightness from the palette)
          • the Text Effect Color property is added in Object Properties / States
          • the item properties are displayed in Object Properties now even when it is in a group
          • minor bugs and errors are fixed, minor ui bugs are fixed and overall stability is improved

          14/10/2020 iRidium Setup 1.3.23.0.22094

          iRidium Studio 2019 (2.0.12.22094)

          • Improved stability, fixed bugs;
          • Improved GUI;
          • FBD schemas can have a repetition interval of less than 1 second;
          • Added new gallery of graphics items;
          • Added hotkey Shift + F2 to insert text on all element states in the workspace;
          • Fixed alignment tools;
          • Improved compatibility with projects from the old version;
          • Added folders to the script tree;
          • Drivers. The Sonos native driver is added; link
          • Drivers. HDL. New commands for IR emitters are added. link
          • Drivers. KNX. The token of the poll status is added - TagUpdate link

            Client (1.3.23.22094)

            • Drivers. Support of the Sonos native driver is added;link
            • Win. Editbox. Highlighting of text with hot keys is added:
              • Shift + Home to select all text before marker.
              • Shift + End to select to select all text after marker.
              • Shift + Left arrow to select one character before marker.
              • Shift + Right arrow to select one character after marker.
            • Drivers. HDL. Support of new commands for IR emitters is added.link
            • Drivers. KNX. Support of token of the poll status is added - TagUpdate link

              Server (1.3.23.22094)

              • Drivers. HDL. Support of new commands for IR emitters is added.link
              • Drivers. KNX. Support of token of the poll status is added - TagUpdate link

              10/09/2020 iRidium Setup 1.3.22.0.21556

              iRidium Studio 2019 (2.0.11.21556)

              • Work of schemes is corrected;
              • Corrections in Domintell scanner are made;
              • Export and import of schemed are added;
              • Support of devices with WebSocket protocol is added to Domintell scanner; link
              • The set of block-schemes is widened;
              • Changes in the design are made;
              • Critical errors are corrected;
              • Drivers. KNX. The "Read request"parameter is added to channel settings; link
              • Drivers. The "AV & Custom Systems (WebSocket)" driver is added; link
              • Drivers. The "Keep Alive" parameter is added for all TCP drivers; link
              • Drivers. Domintell. The "WebSocket" type of protocol to work with DGQG04 module is added. link

              Client (1.3.22.21554)

              • Drivers. KNX. Support the "Read request" parameter is added; link
              • Drivers. Support of the "AV & Custom Systems (WebSocket)" driver is added; link
              • Drivers. Support of the "Keep Alive" parameter is added for all TCP drivers; link
              • Drivers. Domintell. Support of work with DGQG04 module is added. link

              Server (1.3.22.21554)

              • Drivers. Z-Wave. Support of "Fan Mode" and "Fan State" for termostate is added; link
              • Drivers. KNX. Support the "Read request" parameter is added; link
              • Drivers. Support of the "AV & Custom Systems (WebSocket)" driver is added; link
              • Drivers. Support of the "Keep Alive" parameter is added for all TCP drivers; link
              • Drivers. Domintell. Support of work with DGQG04 module is added. link

              05/08/2020 iRidium Setup 1.3.20.1.21085

              iRidium Studio 2019 (2.0.10.21085)

              • Errors in import of Crestron driver are corrected;
              • Drag'n'dropping commands between folders in the driver tree is corrected
              • Changes in design are made;
              • Work with history is improved;
              • Larnitech scanner is added;
              • Support of user databases with *.db resolution is added.

              16/07/2020 iRidium Setup 1.3.20.0.21001

              • Bugs fixes.

              13/07/2020 iRidium Setup 1.3.19.0.20956

              Client (1.3.19.20956)

              • Win. System Menu. Setting for changing client window orientation is added; link
              • Bugs fixes.

              06/07/2020 iRidium Setup 1.3.18.2.20923

              iRidium Studio 2019 (2.0.9.20923)

              • Import of names of BAOS datapoints is corrected;
              • System of creating folders when importing EST projects is changed;
              • Filling the Description field with a group address and a subtype of KNX channel is added;
              • Capability to move folders between Global Caché devices is added;
              • Changes in design are made;
              • Stability is improved.

              11/06/2020 iRidium Setup 1.3.18.1.20787

              iRidium Studio 2019 (2.0.8.20787)

              • Error in synchronization of a panel project with a server one is corrected.
              • Saving projects in the gallery is corrected.
              • SIP driver is added to a server project.
              • Capability to turn off scripts is added.
              • 1-Wire import is added
              • Zigbee import is added.
              • Support of projects from the old studio is improved.
              • Work of the studio on Windows 7 is improved.

              28/05/2020 iRidium Setup 1.3.18.0.20605

              iRidium Studio 2019 (2.0.7.20635)

              • Improved support of projects from old studio;
              • Improved work of Forward value to;
              • Improved work of Duotecno;
              • Added feature to set a password for a script file;
              • Added support of KNX projects from the new version of ETS;
              • Changes in design;
              • Improved stability of the studio.

              Client(1.3.18.20605)

              • JavaScript. The IR.OpenPhotoCamera() method to activate the system camera is added; link
              • Javascript. The IR.DeleteImage() method to delete the camera created via scripts is added; link
              • Drivers. The SIP driver is updated. Added: link
                - work via the TCP protocol
                - possibility to redirect calls
                - the "Preview" mode before replying
                - the "Do not disturb" mode
                - improved sound processing
              • Dirvers. ControlArt 7Port. Possibility to send commands for Somfy is addded; link
              • Drivers. AMX. The IRLB commands for working with items on lists is added; link

              08/05/2020 iRidium Setup 1.3.16.3.20299

              iRidium Studio 2019 (2.0.6.20299)

              • Corrections in item resize when they are added from the gallery;
              • Corrections in item resize when project resolution is changed;
              • Support of KNX projects with a password is added.
              • Date of last synchronization is added to ETS import;
              • Moving folders with commands between channels of GC driver is added;
              • Stability is improved.

              20/04/2020 iRidium Setup 1.3.16.2.20204iRidium

              iRidium Studio 2019 (2.0.5.20204)
              • Deletion of connections when copying an item is corrected;
              • Error in the work of Duotecno scanner is corrected;
              • Error of sending wrong values to levels is corrected;
              • Error at impulse creation is corrected;
              • Display of item names in show usage commands is added;
              • "Forward value to" feature is added; link
              • Minor corrections in design are made.

              06/04/2020 iRidium Setup 1.3.16.1.20039

              Client(1.3.16.20039)

              • Drivers. Support of the "ControlArt 7Port" driver is added; link
              • JavaScript. Listeners for the beginning and the end of the KNX bus polling are added; link
              • JavaScript. Listener for receiving a license by the client is added; link
              • Drivers. SNMP. The "Interval between tag polls" and "Maximum number of tag polls" parameters are added; link

                    Server(1.3.16.20039)

                    • Drivers. Support of the "ControlArt 7Port" driver is added; link
                    • JavaScript. Listeners for the beginning and the end of the KNX bus polling are added; link
                    • JavaScript. Listener for receiving a license by the client is added; link
                    • Drivers. SNMP. The "Interval between tag polls" and "Maximum number of tag polls" parameters are added; link

                          iRidium Studio 2019 (2.0.4.20039)

                          • Errors in schemes are corrected;
                          • Errors during import are corrected;
                          • An error of creating a command with a delay is corrected;
                          • An error of copying a device into another subnet is corrected;
                          • Behavior of a dialogue to assign a command to an item is;
                          • ControlArt 7Port driver is added;
                          • New KNX import is added; link
                          • "None" is added to the landscape orientation of the Screensaver.
                          • Import of "xml" and "csv" files for BacNet is added link





                          16.03.2020 iRidium Studio 2019 1.3.16.0

                          • Parsing of cameras from old projects is corrected;
                          • Tree of scripts is added;
                          • Changes in design;
                          • Improved stability.

                          02.03.2020 iRidium Studio 2019 1.3.15.0

                          • Display of level cursor is corrected;
                          • Bug in display of slider settings of circular levels is corrected;
                          • Search function is added to the list of manufacturers for Global Caché;
                          • Search function is added to dropdown lists;
                          • Changes in design.

                          18.02.2020 iRidium Studio 2019 1.3.12.2

                          • Wrong type of connection is corrected in 1-Wire driver;
                          • Project resolution is added to the name when importing from master project;
                          • Button to synchronize with a server project is added;
                          • Capability to change the color of item border is added;
                          • Stability is improved.


                          04/02/2020 iRidium Studio 2019 1.3.12.1

                          • Fixed tokens in folders;
                          • Fixed disabling items in tree ;
                          • Fixed schemes with virtual tags and commands;
                          • Fixed import of Crestron driver;
                          • Improved support old projects;
                          • Added script update from external editor without requests


                          20.01.2020 iRidium Studio 2019 1.3.12.0

                          • Fixed Clipsal driver;
                          • Fixed server on downloading projects with diagrams from the cloud;
                          • Fixed learning iTach devices;
                          • Added New blocks to schemes (Min, Max, Map);
                          • Added highlighting selected characters in script editor;
                          • Added Undo / Redo buttons to script editor;
                          • Added tooltips for feedback in charts editor;
                          • Added protected projects
                          • Added the ability to hide items in the project tree;
                          • Improved old projects support;
                          • Improved studio stability;
                          • Improved studio design.


                          12.10.2019 iRidium Studio 2019 1.3.11.10

                          • Fixed import of ETS;
                          • Pop-up groups editor can showed as dialog;
                          • Improved Script editor;
                          • Improved Design.

                          25.11.2019 iRidium Studio 2019 1.3.11.9

                          • Fixed detect names by the HDL scanner;
                          • Fixed Yandex Alice Platform driver;
                          • Fixed save projects on network storage;
                          • Added of macros gallery;
                          • Improved optimization.


                          11.11.2019 iRidium Studio 2019 1.3.11.8

                          • HDL Scanner can scan with several network cards;
                          • Fixed Inels Wireless driver;
                          • Fixed choice of recording format in the database;
                          • Improved programming view;
                          • Added import of custom drivers databases;
                          • Added display licenced tags counter for server project
                          • Added number of attempts and scan time to HDL Scanner;
                          • Improved optimization.

                          28.10.2019 iRidium Studio 2019 1.3.11.7

                          • Fixed the KNX LMx driver (Logic Machine), added connection settings;
                          • DnD commands / feedbacks to Programming View;
                          • Strict and non-strict select for items in Workspace
                          • Added color picker to the script editor;
                          • Added a new Label item;
                          • Improved support for old projects;
                          • Improved studio design.

                          14.10.2019 iRidium Studio 2019 1.3.11.6

                          • Improved states panel;
                          • New colors dialog;
                          • Added "copy of element state style" to right-click menu;
                          • Added Drag-n-Drop and double-click to template selection window for static list;
                          • Added "horizontal scroll" hot key as Shift + mouse wheel;
                          • Added new Apple devices resolutions;

                          30.09.2019 iRidium Studio 2019 1.3.10.5

                          • Fixed fonts dialog;
                          • Fixed HDL Driver;
                          • Fixed encripted scripts load;
                          • Improve i2 and i3 projects support;
                          • Added BACNET Import;
                          • Added Emulator button for server projects;
                          • Added Multi-State Images import to GUI Gallery (jsut drop images with separator '_' to make it);
                          • Added new alignment tool - Set horizontal / vertical spaces (you can specify the distance between the elements);

                          16.09.2019 iRidium Studio 2019 1.3.10.4

                          • Improved old projects support;
                          • Improved stability;
                          • Added save project protection when not enough space on the hard drive;
                          • Added stop playing sounds in the gallery;
                          • Fixed studio window crash on minimize;
                          • Fixed projects resize;

                          02.09.2019 iRidium Studio 2019 1.3.10.3

                          • Сhanges in server schedules;
                          • Сhanges in server routines;
                          • Сhanges in the Yandex Alice driver;
                          • Сhanges in the transfer;
                          • Сhanges in the script editor;
                          • Fixes import to the gallery;
                          • Added items grouping;
                          • Added D-n-d in the programming window;
                          • Added D-n-d in the macro window;
                          • Added ability to minimize events in the programming window;
                          • Improved performance.

                          19.08.2019 iRidium Studio 2019 1.3.10.2

                          • Corrections in HDL driver;
                          • Corrections in KNX Router (KNXnet/IP) / Serial (UMC) driver;
                          • Corrections in Transfer work;
                          • Start page is added;
                          • Capability to DnD text is added;
                          • Interface is improved.

                          05.08.2019 iRidium Studio 2019 1.3.10.1.17761

                          • Corrected errors in Windows 7 work;
                          • Corrections in Virtual driver; 
                          • Corrections in Amazon Alexa Network driver;
                          • Corrections in Google Home Network driver;
                          • Corrections in import of TPDesign5 projects;
                          • Improved work with scripts;
                          • Improved work with projects from old studio;
                          • Improved work with studio when opening projects from windows explorer;
                          • Added import from сsv file (*.csv) to Modbus driver.


                          22.07.2019 iRidium Studio 2019 1.0.1.17590

                          • Corrected errors in Windows 7 work;
                          • Corrections in Virtual driver; 
                          • Corrections in Amazon Alexa Network driver;
                          • Corrections in Google Home Network driver;
                          • Corrections in import of TPDesign5 projects;
                          • Improved work with scripts;
                          • Improved work with projects from old studio;
                          • Improved work with studio when opening projects from windows explorer;
                          • Added import from сsv file (*.csv) to Modbus driver.


                          21.06.2019 iRidium Studio 2019 1.0.0.17309


                          • Development of scanner;
                          • Development of graphic items;
                          • Development of a server project;
                          • Development of import from ETS project;
                          • Development of converting AMX projects;
                          • Development of search when adding drivers and subdevices;
                          • Corrections in AV & Custom Systems driver:
                          • Corrections in Larnitech driver;
                          • Corrections in Helvar driver;
                          • Corrections in Domintell driver;
                          • Corrections in KNX driver;
                          • Corrections in HDL driver;
                          • Corrections in Serial drivers;
                          • Global Cache cloud is added;
                          • Helvar TCP / UDP driver is added;
                          • ZWave Network is added;
                          • Corrections in project merge;
                          • Corrections in selecting groups of items;
                          • Corrections in search in all scripts;
                          • Fast panel is moved down;
                          • Optimization of working with projects from the Studio of previous versions.


                          20.05.2019 iRidium Studio 2019 1.0.0.17064

                          • Added search for channels and feedbacks in the server project;
                          • Fixes in the HDL driver;
                          • Corrections to the driver Driver KNX Router;
                          • Driver BACNet driver fixes;
                          • Fixes in the AV & Custom Systems driver (TCP / UDP / HTTP);
                          • Removed Galact DVR driver (beta);
                          • Fixed a bug with the transfer of text containing Enter;
                          • Correction of camera bugs from the studio gallery;
                          • Bug fix with fioat function for levels
                          • Added icons to menu items;
                          • Added support for AMX projects;
                          • Added import of ETS projects;


                          15.04.2019 iRidium Studio 2019 1.0.0.16825

                          Tools:

                          • Creating a panel project
                          • Creating a server project
                          • Opening projects
                          • View recently used projects.
                          • Item alignment
                          • Text alignment
                          • Grid
                          • Communications window
                          • Item Settings Panel

                          Localization

                          • Russian
                          • English
                          • Netherlands

                          Studio settings

                          • emulator settings
                          • workspace settings
                          • Backups
                          • Setting the project's default graphic theme

                          Project Settings

                          • Project resize
                          • Setting up start pages
                          • Screensaver setting
                          • Setting project passwords
                          • Remote debugging setup
                          • Project info

                          Server project

                          • Driver setup
                          • Setting rules
                          • Schedule setting
                          • System tokens
                          • Project Tokens

                          Panel project

                          • Workspace
                          • Graphic elements
                            • Button
                            • Level
                            • Multistate button
                            • Multistate level
                            • Joistick
                            • Editbox
                            • List
                            • Up / Down button
                            • Trigger button
                            • Virtual key
                            • Static list
                            • Linear trend
                            • Pie char
                            • Bar char
                            • Circular level
                            • Advanced list
                          • Gallery
                            • Global Gallery
                            • Local Gallery
                            • Sounds
                            • Cameras
                            • Fonts
                          • drivers in the project
                          • System tokens
                          • Project Tokens
                          • System tokens
                          • Project Tokens
                          • Modules

                          Drivers

                          • SNMP
                          • Sip
                          • MQPP
                          • Modbus TCP
                          • Modbus TCP Server (Slave mode)
                          • Modbus RTU
                          • Mosbus ASCII
                          • Lutron
                          • KNX Router
                          • KNX IP BAOS 771-774 / 777
                          • KNX BAOS 770
                          • iRidium Server
                          • iNels RF
                          • Helvar
                          • Hdl
                          • Global cache
                          • Epsnet
                          • Elko EP iNels
                          • DuoTecno
                          • Domintell
                          • AV & Custom systems (HTTP)
                          • AV & Custom systems
                          • Crestron
                          • Clipsal
                          • Beckhoff
                          • Bacnet
                          • AMX
                          • 1-Wire

                          Scanners / Importers

                          • HDL scanner
                          • DuoTecno Scanner
                          • Domintell scanner

                          Scripts

                          • Work with script modules
                          • Intellectual hint
                          • Script helper
                          • Work in a third-party IDE

                            This article was helpful for 14 people. Is this article helpful for you?