AV & Custom Systems (UDP) - connection of 2 drivers

If you have to communicate with 2 UDP devices but can't connect with one them with:

[00:00:02.418]   CCustomDevice(2): StartConnect()
[00:00:07.426]   CCustomDevice(2): Time of waiting for connection is over!
[00:00:07.441]   CCustomDevice(2): StartConnect()
[00:00:12.464]   CCustomDevice(2): Time of waiting for connection is over!

It occurs only if 2 devices communicate with the same local port.

Please change a local port of one of devices to the different value. It is not fales the connection with remote equipment.

Previous article: Send a command to AV equipment automatically on project start

Next article: PUT command via HTTP Driver

Is this article helpful for you?

Customer support service by UserEcho