PIN code for Transfer and Client (new) 04/09/2015

PIN codes were added to the latest versions of the Transfer and the Client.

PIN codes are introduced to prevent uploading designs onto a panel via Transfer by chance.

Do the following on the panel:

1. Enter SystemMenu
Image 9427

2. Open Update
Image 9428

3. Enter PIN code for the current control panel in the PIN field.
Image 9429

Do the following in the Transfer:
1. Click the right mouse button on the required panel and select "Properties" in the window that appears.
Image 9424

2. Find PIN in Panel properties
Image 9425

3. Enter the PIN code, that you used on the panel, in the PIN field.
Image 9426

If you entered a different PIN code, an error is logged in the Tranfer.

This article was helpful for 1 person. Is this article helpful for you?