0

Onkyo js module

Alessandro Munari 5 лет назад в Bugs and problems обновлен rocfusion 4 месяца назад 7

Hi, the Onkyo module does not work with my HT-R993 Onkyo amplifier. In order to let this AVR works, you need to change, part of the code in this way:


ORIGINAL Line 673: var len = cmd.length + 3;

MODIFIED Line 673: var len = cmd.length + 1;


ORIGINAL Line 673: that.device.Send(['ISCP', 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, len, 0x01, 0x00, 0x00, 0x00, cmd, 0x0D]);


MODIFIED Line 673: that.device.Send(['ISCP', 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, len, 0x01, 0x00, 0x00, 0x00, cmd, 0x0D, 0x0A, 0x1A]);


Just change the "len" calculation and add two more CR caracters (0x0A, 0x1A) This change allow also to work with latest Onkyo AVR,

Same change should be applied also to the Integra protocol.

If you have working and tested versions of ONKYO JS module for i3 pro - could you please upload it here for us?


Thank you!

Hi

What Alessandro has described is the difference between serial and IP commands.




Attached is a script that lets you flip between the serial and IP connections, and also has extras like the network functions control and some other bug fixes.


At the bottom of the script (same script for Onkyo & Integra) you will find this line to change the settings


This has been tested on Integra and used in many projects in V3


Integra-Onkyo V17.js





Bom dia a todos, alguém sabe me informar se o módulo Onkyo no i3 Lite funciona para receiver da marca Integra?

Olá! Sim, o módulo funciona com o equipamento Integra

onkyo module does not control RZ-830 , any thoughts?

hi, when you want to control an onkyo directly over tcp then make sure you are using port 60128 in the driver.  the script works with an rz1100,  the volume control is a bit messed up,  which I corrected 

Сервис поддержки клиентов работает на платформе UserEcho