Uw opmerkingen

Same with windows client (current version from our site) - it works.

Seems like your crestron parameters getting lost when you add the module. If you tell me your test conditions I will try by your way.

Also try to enter IP-ID as "32" on your windows client as Vaclav said before. According to your screen your parameters don't get lost on windows client. 

I just tested it with our crestron system - it works fine.
Test conditions: iPhone 5S, app from appstore and module version 1.12.0 (the actual one).
I will try it on windows also and tell you about results.

On which device do you have the empty fields after pressing the gear button? And which app version? There should be parameters that you have entered.

Hello,

sorry for the delay.


I will check tomorrow how it works with our crestron.

Is the problem solved?

Same with control: if you trying to control from configurator or from project before you press "Make public" it will not have success.

This is not homekit issue.
This happens because Domintell IP module holds only 1 connect. So when you upload your project on server it makes your Domintell busy by the server.

Yes, i3 lite works via the server but only in project mode after you press "Make public" button. In configator you are using panel mode. So you have server connected and trying to make connect from panel and get rejected. 

So basically I can advice you to setup your domintell so it can hold multi-connect. Or just turn off server while you setuping modules. 

We will check it at Monday. Same with 2N problem that you have described at other topic.


Sorry for the delayed answer.

Добрый день.


Остались ли у вас проблемы при работе с устройством? Можем мы считать эту задачу решенной? 

Добрый день.


Ожидаем от вас более подробного описания к требованиям к кнопке, чтобы добавить эту реализацию в план разработки.

Hello.


Is the problem still actual?