Your comments

Здравствуйте!


Отпишитесь, пожалуйста, о результатах.

Здравствуйте!


Мы исправили проблему с токеном SSID. Теперь, при выходе из зоны покрытия WiFi или при переключении на другой WiFi, этот токен будет менять свое состояние. Попробуйте скачать новую версию 1.2.5:13944

Здравствуйте!


Спасибо за обращение! Проблема с получением данных о WiFi сети подтвердилась. Постараемся исправить в ближайшее время. 

Что же касается скрипта, то я рекомендовал бы вместо таймера использовать глобальный слушатель, т.к. он будет реагировать только на изменение токена или тэга, в отличие от таймера, который срабатывает всегда в указанные промежутки времени. 

Например:


IR.SetGlobalListener(IR.EVENT_GLOBAL_TAG_CHANGE, function(name, value)
{
          
                    
     
     
});
// Subscribe 
IR.SubscribeTagChange("System.Net.SSID");

Hello!


ETS send data on KNX bus, not directly to iRidium

Yes, i understand this. I wrote you about the same.

but i connected on our client and i recorder the telegrams of 2bit...see attachment

As far as I understand your client has equipment that supports the type of group address 2bit? 

When sending a command to the bus, you could also see the response in the ETS? Could you give us access to this equipment?

if iridium not receive this data type from ets, why iridium must 
receive if this telegrams are send from an device?

Iridium does not receive data from the ETS, it gets them from the KNX bus. Therefore, if nothing comes from the bus, then Iridium will not get anything.

Hello!


you have checked that iridium not receive the 2bit and 4bit data type, why you change this ticket as "not a bug"?

We can not test the work with the variable 2bit, because we do not have the appropriate equipment. As far as I understand, you also do not have the proper equipment.

A variable with type 4bit does not return any data and this is written on our Wikipedia.



But I'm not sure about the variable with type 2Bit. Because if I try to query the state of this variable in ETS, then I do not see any answer.


If I ask for the state of another variable, then the answer comes.


Therefore, to test this variable, we need hardware that supports it.

I closed the ticket, but we do not refuse to help you. And if there is a possibility to check this variable, we will inform you about the results.

Hello!


At the moment I close the ticket. But if you will have equipment on which you can check, then write to us.

Hello!


Thanks for the info! We will try to fix it.

Hello!


Sorry for delay with answer. In the latest server versions, setting up remote logging is working fine.

Здравствуйте!


Планируем на этой неделе.