1. Archive: i2 Control V2.2
  2. Products
  3. KNX
  4. Vragen
0
Beantwoord

Number of KNX group addresses with i2control V2.2

Patrick PETIT 9 jaar geleden in Products / KNX • bijgewerkt door Theo Derks - NL (distributor) 9 jaar geleden • 6
Hello,
Are there a limitation on the number of KNX group addresses with i2control V2.2. I use the Weinzierl BAOS 772 interface that can handle 1000 address groups
Patrick
Under review
iRidiumNikita 9 jaar geleden
Hello!
The iRidium has no limit to the number of group addresses.

Beantwoord
iRidiumNikita 9 jaar geleden
evg 9 jaar geleden
In one of my projects I have about 2000 adresses
iRidiumNikita 9 jaar geleden
In this case you will need to use two BAOS 772 interface, but iRidium have no limit of group addresses
evg 9 jaar geleden
Absolutely right. I have 10 of them and all is working just fine.
P.s. It takes lot of time to setup all this baoses :)
Theo Derks - NL (distributor) 9 jaar geleden
I have a German customer that is searching for a good visualization software. But he need 40.000 (yes, 40.000) group-addresses in his project.
Can this be done in iRidium?

Customer support service by UserEcho