0
Отвечен

How to setup the group climate for each rooms?

Punith 9 лет назад в Продукты / HDL-BUS Pro обновлен Ekaterina (head of support) 9 лет назад 5
How to setup the group climate for each rooms?


Kindly see the attachments which is marked in the yellow and please tel me the ways

Image 8240

Image 8241


Отвечен
You have to make their own DLP panel with AC support in each room with AC.
Add the user intrface for DLP panelin your project and use the command to control AC true the DLP
is it room temperature or AC temperature ??

Which one should be configured in the Blue item, and behind that there is same value in the left side,
Make it clear please,,
Normally the DLP Read the Atmosphere temperature ,,, (Room temperature) how to setup it?


Which one is preferable for that multistate button

0: invalid1: IRfunction (0:off,1:on)
2: Lock key ofpanel (0:off,1:on)
3: AC power (0:off,1:on)
4: Cooling Temp (0~84)
5: Fanspeed (0:auto,1:high,2:medium,3:low)
6: AC Mode (0:cooling,1:heating,2:fan,3:auto,4:dehumidfy)
7: Heating Temp (0~84)
8: Auto Temp (0~84)
9: Rise Temp (0~10)
10: Decrese temp (0~10)

11: LCD back light status (0:off,1:on)
12: Lock AC (0:off,1:on)
13: Back Light (0~100)
14: Status Light (0~100)
15: Shield Button (1~16)
16: Shield Page (1~4)
17: Control Button Status (0:off,1:on)
18: Control Button (1~16)
19: Dry Temp (0~84)
20: Floor Heating Status (0:off,1:on)
21: Heating Mode (5:timer,4:away,3:night,2:day,1:normal)
22: Rise Temp (1~5)
23: Decrease Temp (1~5)

24: Setuppage Lock (0:off,1:on)

which one can be controlled and How many command i have to use it for so...
Punit we have sent u the project demonstrate how to get the room temperature and the AC temperature.
Here it is again:
https://s3.amazonaws.com/iRidiumWiki2.0/Driver_HDL/HDL_DLP_AC.irpz

The blue button shows the current room temp. The gray button show the temp should be applyed. The mode buttons shows the current mode.



Сервис поддержки клиентов работает на платформе UserEcho