0
Отклонен

I3 config

Patrick PETIT 8 лет назад обновлен Nikolay Rusanov 8 лет назад 8

Hello,


On your site I can not find an explanation on I3 config.
It is possible to download i3 config on apple store!
What is I3 config?

Bests regards

Patrick

Отклонен

"i3 config" - this is old name of our "i3lite" application. http://www.iridiummobile.net/lite/

I think Patrick means that i3 config should be removed from appstore if it has no use

This is not what I meant because I knew i2control, but I do not know version 3.

So if it does not have utility yes it must be deleted !

When we discover version 3, we ask ourselves questions (not you).


In addition what does not facilitate help is that you do not like one can find in other manufacturers, a document for a topic (.pdf). For example iridium_V3.pdf


I do not know version 3, I do not speak English, I only have a technical English.

And since your documents are not in French, there is sometimes an ambiguity about the real meaning.


I came back to you because I had developed a client application with iRidium GUI Editor version 2. I did not commercialize it because I did not have a project for and the license was too expensive.

The license for a panel is not interesting because too complicated to manage when the customer changes his iPhone for example.

Yesterday I looked again at your site because I wanted to see prices and philosophy with version 3. And I have to answer a customer offer. management of a remote KNX installation (lights + blinds) for a witness apartment.

If it's good, there may be 10 apartments on this project.

In a few weeks, early 2017, I have to respond to another project. A witness apartment also and if it is good on this 2nd project there can be up to 80 apartments.


I just looked at the apple store.

You have 3 applications, i3 config (so we forget), i3 lite et i3 pro.


Questions:

1- If I develop a client application like I2control, I need to use iRidium Studio on my PC.?


2- I had downloaded iRidium Studio in September 2015. The version V3.0.0.18093 of 02.09.2015 is the latest version ?


3- There is only one transfer software (iRidium Transfer [panels]), the same for version 2 and for version 3 ?

I use Ridium Transfer [panels] Version: 2.2.3.102


4- For a client application like I2control, the application to download on the apple store is I3 pro ?


5- For I3 pro and for a BAOS KNX viewing project only. I understand that I would have to take the basic version that can handle being used with 5 panels ?

5.1- For a price of 400 euros (as a Professional), What does the abbreviation MSRP mean (assuming it is the price for the customer)?

5.2- In this case, the basic license for 5 panels, there are no limitations on the number of addresses of groups or data points ?

5.3- How is the basic license managed? With the serial number of the Weinzierl BAOS 772 interface?

5.4- If the Weinzierl BAOS 772 interface does not work anymore and needs to be changed, for example due to a lightning surge. How does it happen ? The customer can not pay another license !


Thank you

Best Regards

Patrick


Please see training webinars before start working with iRidium pro.


iRidium v3 is devided on 2 versions now. There is iRidium pro (successor for iRidium 2) with editor and i3 pro app. There is also iRidium lite (i3 lite) app which does not need an editor and gets modules from iRidium store.


Documentation available here.


1- If I develop a client application like I2control, I need to use iRidium Studio on my PC.?

Yes. You can import your v2 projects there


2- I had downloaded iRidium Studio in September 2015. The version V3.0.0.18093 of 02.09.2015 is the latest version ?

No, it is constantly updated, almost every month and available here.

Latest changes can be viiewed here.


3- There is only one transfer software (iRidium Transfer [panels]), the same for version 2 and for version 3 ? I use Ridium Transfer [panels] Version: 2.2.3.102

iRidium pro uses cloud transfer and license.


4- For a client application like I2control, the application to download on the apple store is I3 pro ?

Yes


5- For I3 pro and for a BAOS KNX viewing project only. I understand that I would have to take the basic version that can handle being used with 5 panels ?

Yes, basic is for 5 panels


5.1- For a price of 400 euros (as a Professional), What does the abbreviation MSRP mean (assuming it is the price for the customer)?

MSRP is manufacturer's suggested retail price. Dealer gets lower price then MSRP.


5.2- In this case, the basic license for 5 panels, there are no limitations on the number of addresses of groups or data points ?

If you use only panels - no limitation. If you use iRidium server controller - there is limit to datapoints (feedbacks).


5.3- How is the basic license managed? With the serial number of the Weinzierl BAOS 772 interface?

It is now managed in My Accound section on website. Please see docs and webinar.


5.4- If the Weinzierl BAOS 772 interface does not work anymore and needs to be changed, for example due to a lightning surge. How does it happen ? The customer can not pay another license!

Ofcourse not, with new version controller is not important. Also you can change panels, add or remove (from these 5 panels) new devices as many times as you wish.

1- As there is an application version 2 (i2control) and an application for version 3 (i3 pro), I suppose it is possible to have on an iPhone both functional applications (i2control AND i3 pro)?


2- In My licenses, Where is the documentation that explains pholosophy on the page ?


3- Add folder, for what purpose? Add key, for what use?


4- With version 2 we made a copy of the panel HWID or serial number of the KNX interface for a site license and with version 3, what do we do?

1- As there is an application version 2 (i2control) and an application for version 3 (i3 pro), I suppose it is possible to have on an iPhone both functional applications (i2control AND i3 pro)?

Yes, possible. But keepin mind that i2 control is 32bit application and in iOS 10 it may hove some issues, like not working RTSP or SIP protocol


2- In My licenses, Where is the documentation that explains pholosophy on the page ?

Here


3- Add folder, for what purpose? Add key, for what use?

Add folder to manage multiple projects. Add key if you buy it other way than directly from website


4- With version 2 we made a copy of the panel HWID or serial number of the KNX interface for a site license and with version 3, what do we do?

You just make an account for your client email and invite him into licensed project. On a client panel you (or client) need to login with this email and open the project

OK, thank you.

If the cloud is malfunctioning then the client will not be able to access its installation ?

Cloud is used now to initially license the panel and download the project. Then it will function without cloud or require internet connection.

Сервис поддержки клиентов работает на платформе UserEcho