Your comments
Please contact to Roger Wicks: info@rocfusion.com
For the moment it is possible to work with thermostats controlled by your automation system only.
In the next iRidium version Nest will be supported, but it is not available for the moment.
One of protocols supported by Inels called EPSNET, and you can work with inels variables throw it.
Please see all the details on our wiki pages: http://wiki2.iridiummobile.net/EPSNET
I checked with your settings throw Remote Server. Sometimes it takes up to 20 seconds on Server side (it doesn't answer sometimes), but connection established.
With Internet Mode I see Online without delay. Is it looks different for you with iLife app?
Hello!
1. Please try to use the command "READ STATUS OF UNIVERSAL SWITCH" to ask the switch status. If it possible, the variable answer to you with status. Some HDL variables doesn't broadcast if somebody change their ststus. Some of UV switches (for example IR blaster) doesn't answer at all. You have to setup this command with Timer: 3000 ms (for example) to know the status
2. Please see the full list of DLP commands and feedbacks:
Command:
| Operation Code | Panel Control | DLP panel control | |
| Parameter | Option | Value * | |
| 1 | IR Control | 0 | 0 = OFF, 1 = ON |
| 2 | Lock Panel | 0 | 0 = OFF, 1 = ON |
| 3 | AC Power | 0 | 0 = OFF, 1 = ON |
| 4 | Cooling Temp | 0 | 0-84 |
| 5 | Fan Speed | 0 | 0 = Auto, 1 = High, 2 = Medium, 3 = Low |
| 6 | AC Mode | 0 | 0 = Cooling, 1 = Heating, 2 = Fan , 3 = Auto, 4 = Dehumidfy |
| 7 | Heat Temp | 0 | 0-84 |
| 8 | Auto Temp | 0 | 0-84 |
| 9 | Rise Temp | 0 | 0-5 |
| 10 | Decrease Temp | 0 | 0-5 |
| 11 | Back Light Status | 0 | 0 = OFF, 1 = ON |
| 12 | Lock AC | 0 | 0 = OFF, 1 = ON |
| 13 | Back LIght Level | 0 | 0-100 |
| 14 | Status Light Level | 0 | 0-100 |
| 15 | Shield Button | 1-255 (Key No.) | Key Status 0 = Invalid, 1 = Valid |
| 16 | Shield Page | 1-255 (Page No.) | Page Status 0 = Invalid, 1 = Valid |
| 17 | Control Button LED | 1-255 (Key No.) | Key Status 0 = Invalid, 1 = Valid |
| 18 | Control Button | 1-255 (Key No.) | Key Status 0 = Invalid, 1 = Valid |
| 19 | Dry Temp | 0 | 0-84 |
| 20 | Temp Status | 0 | 0 = OFF, 1 = ON |
| 21 | Temp Mode | 0 | 1 = Normal, 2 = Day , 3 = Night, 4 = Away, 5 = Timer |
| 22 | FH Rise Temp | 0 | 0-5 |
| 23 | FH Decrease Temp | 0 | 0-5 |
| 24 | Lock Setup Page | 0 | 0 = OFF, 1 = ON |
| 25 | Normal Temp | 0 | 0-84 |
| 26 | Day Temp | 0 | 0-84 |
| 27 | Night Temp | 0 | 0-84 |
| 28 | Away Temp | 0 | 0-84 |
| Need Confirm | Disable/Enable | wait for confirmation | |
| Use Timer | false | don't use | |
| 0 | send the command once when app starts | ||
| 1000...n | (s) send the request in interval | ||
* Value - укажите при перетягивании команды на графический элемент
Hello Leszek
Please take a look at our new product iRidium Pro, it supports linear trends:
Hi Ameen
Yes you can control INELS with our EPSNET driver
Hi Nertila
You can use iRidium to control different automation systems, like KNX, Modbus, AMX, HDL, AV, etc. in one user interface. But we don't have a special solution for Leviton yet. If this equipment can be controlled with one of protocols, supported by iRidium, so you can control it with iRidium.
Or you can make your own JavaScript driver for Leviton, if you have a programming skills.
Event, when channel activated:
IR.AddListener(IR.EVENT_CHANNEL_SET, IR.GetDevice("Driver"), function(Name) {
});Customer support service by UserEcho
it is true, but when you convert TP4, you don't have a Hold event at all. If you doesn't have any actions on Hold, it is not a problem, Release will work.