Your comments

Hello.

For Intel HD very important a stable framerate, especially if the screen resolution changes dynamically. Locally no problems. When switch i3Pro in full screen, the resolution changes to what is specified in the project settings. If it is greater than actual, the VNC session will see only "black screen". In some cases you can work around this, but it's not a problem of the render. This is a problem of the device.

Hello.

If your devices do not support OGL 3.0, then the rendering in i3Pro will not work. If there is DX11, try temporarily using DX11 instead of OGL. Probably the problem is in fullscreen via VNC will not appear. Note: DX11 is beta, use it with caution.

Make sure that the device you connect supports OpenGL 3.0 and correctly working with him (do a load test on your hardware). Westmere Microarchitecture (Socket 1156) will not work, because it only supports OpenGL 2.1.

Hello.

What is Render in the panel project (OGL, DX11, etc.)?

Hello.

If you want a solution without scripting, it is possible to use a Scheme Blocks.
Example attached.

bs_pnl.irpz

bs_srv.sirpz


In the attached example: if the feedback "Virtual 1" comes to a value less than 20, then the project panel shows "0" (red field). If the feedback "Virtual 1" is coming 20 or more, it transferred to the feedback "Virtual 2" and the project panel displays the integer part of the obtained value (green field).

If you connect via RDP or Radmin - the problem remains? TeamViewer uses its own proprietary protocol. It is not documented in transfer of the image. We got the normal work of the presented project in full screen when connecting via RDP and connect via Radmin. You need to match the project resolution and screen resolution on computers.

The problem is the screen resolution. Color depth and the manufacturer/model of the videocard do not affect the appearance blackscreen in a remote connection. If you set a project resolution of 1920*1080, you do not need it to start on the screen with a lower resolution (if you have a screen 1600*900 - in project, specify same). Moreover, it is not necessary to connect remotely from the device on which the resolution even less (e.g. 1280*720). Under these conditions, in most cases, the application window will be unreadable, even through teamviewer, even through RDP.

Please specify: what resolution is used in Project Properties (Landscape Width and Landscape Height)? What is the screen resolution on the device, which is connected via Teamviewer? What screen resolution is used on the device that is connected?

Hello.


Make a copy of the project and in Project Properties set the Target Device:

iPad 1, 2 (1024x768)


Note: Landscape Width and Landscape Height does not exceed the real resolution on the computer to which you want to connect remotely. The screen resolution on the computer from which you will connect remotely, should not be less than that specified in the project.


Run the project on a computer running Windows and connect to this computer via RDP. Expand the project in full screen. The project looks like a black window?


Optional: on this computer install Radmin and try to connect via Radmin. Expand the project in full screen. The project looks like a black window?


Same thing try to do it through Teamviewer.