Your comments
Dear Patrick,
As there is no official release version of Windows 10 at the moment, we do not support it. But we plan to do it.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
As there is no official release version of Windows 10 at the moment, we do not support it. But we plan to do it.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Dear Hidal78b,
We tested iTunes installed on Win + ipad air 2 (iOS 8.1.3), Samsung Galaxy S5 mini (Android 4.2.2) in turns using i2 control V2.2 (2.2.2). We didn't notice any connection loss.
So it is possible that the problem you experience is an issue of your Android device. To check that, you need to try controlling the module from any other Android or iOS device at the same conditions (but not from the PC with the installed iTunes!).
To eliminate the effect of the network settings, it is required to turn off firewall on the PC with the installed iTunes.
If you try both of these variants, but still have problems, then please send us the log of i2 Control work on Android (use Debugging log).
If is necessary to activate loggin, then restart i2 control V2.2 and after that work as usual, keeping track of reconnections to iTunes. Then send us the log by e-mail.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
We tested iTunes installed on Win + ipad air 2 (iOS 8.1.3), Samsung Galaxy S5 mini (Android 4.2.2) in turns using i2 control V2.2 (2.2.2). We didn't notice any connection loss.
So it is possible that the problem you experience is an issue of your Android device. To check that, you need to try controlling the module from any other Android or iOS device at the same conditions (but not from the PC with the installed iTunes!).
To eliminate the effect of the network settings, it is required to turn off firewall on the PC with the installed iTunes.
If you try both of these variants, but still have problems, then please send us the log of i2 Control work on Android (use Debugging log).
If is necessary to activate loggin, then restart i2 control V2.2 and after that work as usual, keeping track of reconnections to iTunes. Then send us the log by e-mail.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Dear Patrick,
At the moment we do not have such option. We plan to do it in the future but there are no particular dates for that.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
At the moment we do not have such option. We plan to do it in the future but there are no particular dates for that.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Dear Punit,
AC in HDL is controlled with the help of DLP panels which have a particular set of commands. You can see an example of controlling AC mode and temperature values via the DLP panel.
Description:
http://wiki2.iridiummobile.net/Examples_of_Controlling_Equipment_of_the_HDL-BUS_Pro_Bus#Conditioners
Examples:
https://s3.amazonaws.com/iRidiumWiki2.0/Driver_HDL/HDL_DLP.irpz
https://s3.amazonaws.com/iRidiumWiki2.0/Driver_HDL/HDL_DLP_AC.irpz
Sincerely yours,
Olga Ermakova
iRidium mobile Team
AC in HDL is controlled with the help of DLP panels which have a particular set of commands. You can see an example of controlling AC mode and temperature values via the DLP panel.
Description:
http://wiki2.iridiummobile.net/Examples_of_Controlling_Equipment_of_the_HDL-BUS_Pro_Bus#Conditioners
Examples:
https://s3.amazonaws.com/iRidiumWiki2.0/Driver_HDL/HDL_DLP.irpz
https://s3.amazonaws.com/iRidiumWiki2.0/Driver_HDL/HDL_DLP_AC.irpz
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Hello, Punit!
1. You should set port forwarding of the camera (80 or 554) to the external network to have the remote connection on the router.
2. In the project you should indicate external IP address of the router, to which the camera is connected. The address must be static or it must use the service DDNS.
Best regards,
iRidium mobile Support Team
1. You should set port forwarding of the camera (80 or 554) to the external network to have the remote connection on the router.
2. In the project you should indicate external IP address of the router, to which the camera is connected. The address must be static or it must use the service DDNS.
Best regards,
iRidium mobile Support Team
Dear Damian,
We plan to implement it but not in the nearest future as we have a lot of other tasks.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
We plan to implement it but not in the nearest future as we have a lot of other tasks.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Dear Damian,
Please see the example of using the button here: CBusTestBed_iPhone (button).irpz
Commands are assigned to the button using Send Number. Then write a number depending on the button function (Up = 255).
If you want to control from 1 button, then you have to use scripts. Please describe in details what you want to get from the button (for example, what will happen to the button if you click on the it in iRidium - your curtains go up and then you strop them using the wall panel, not the interface. In what sequence should the commands be sent when clicking Up/Down/Stop? etc.)
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Please see the example of using the button here: CBusTestBed_iPhone (button).irpz
Commands are assigned to the button using Send Number. Then write a number depending on the button function (Up = 255).
If you want to control from 1 button, then you have to use scripts. Please describe in details what you want to get from the button (for example, what will happen to the button if you click on the it in iRidium - your curtains go up and then you strop them using the wall panel, not the interface. In what sequence should the commands be sent when clicking Up/Down/Stop? etc.)
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Dear Carlos,
The driver for MZBOX is not ready at the moment. We'll get to working on it in our next versions.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
The driver for MZBOX is not ready at the moment. We'll get to working on it in our next versions.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Dear Paul,
We replied to you already.
Please tell us if you have some other questions.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
We replied to you already.
Please tell us if you have some other questions.
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Customer support service by UserEcho
At the moment trends are built only with the help of scripts. There are no ready instruments for that. We plan to implement this function in V3.0. Most likely it will be released by the end of the year.
Sincerely yours,
Olga Ermakova
iRidium mobile Team