Your comments

Dear Clayton,
at the moment you can use these gesture events: TOUCH_MOVE, TOUCH_DOWN, TOUCH_UP
You can read more about them on our wiki instructions.
http://iridiummobile.net/wiki2.0/index.php?title=GUI_API#IR.EVENT_TOUCH_MOVE
http://iridiummobile.net/wiki2.0/index.php?title=GUI_API#IR.EVENT_TOUCH_UP
http://iridiummobile.net/wiki2.0/index.php?title=GUI_API#IR.EVENT_TOUCH_MOVE
Actually installers need these gestures.
Thank you for your idea about new events. They will be added in the future.


With best wishes,
Victoria Vaynert.
Matthijs, you are always welcome!

It is impossible, iRidium requests for data and if it doesn't request you will not receive any variables. For more information how iRidium for Modbus driver works read here: http://wiki2.iridiummobile.net/Modbus


Have a good day,
Victoria Vaynert.

Dear Matthijs, you can request about 200 variables (the usual number is 40-60). You mix two things: every 50 ms 1 transaction is requested to a little group of addresses not to 4000. If 4000 addresses are requested it will take more time. At best a controller can request in 1000-2000 ms using iRidium. And moreover speed depends on connection to the controller: connection can be direct among controllers, or they can be connected via router.
With regards,
Victoria Vaynert.

I cannot answer your questions. It depends on a controller you use. Please test it on your own and then you can send us your feedback!


With regards,
Victoria Vaynert.

Hello Matthijs,
our command has checked work of Modbus controller and to be exact import from CSV, 4000 commands and 4000 feedback channels. Everything worked correctly, the project asked for data and sent commands. Recommended frequency of request is 10000 ms. Actually every register must work with about 56535 addresses but it depends on controller power.


With regards,
Victoria Vaynert.

Dear Nick, you can use Project Token and send the value 1 to it. 1 means active state of a graphic item. And when calling the Hide Popip command write 0 in Project Token. Then assign Token with the Value of a graphic item you are using. The graphic item must have Feedback: Channel.
Please use as a example this project (see the attachment).
With best wishes,
Victoria Vaynert.


Project 1.irpz
Hello, Erwin!


It is possible to create a project based on the XML file.The .irpz file contains the Project.irp file, it’s the xml file of the project. The xml file contains all information about your project, its pages, popups, effects and scripts and etc. This file is created by Editor. But it can be also created manually. Please read and learn the structure of the file before you create it manually.


With regards,
Victoria Vaynert.
Thank you Faisal!


We're pleased to hear such nice words from you!


Regards,
Victoria Vaynert.
Jan,
you are welcome!

Feel free to contact us,
Victoria Vaynert.