On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.

Please subscribe to the Change Log to know our news

Theo Derks - NL (distributor) 6 months ago in Server Solutions / UMC Server • updated 6 months ago 3


i think it's a good idea to have the possibility to change the name of de iRidium Server (UMC/RPI) in the webinterface. Now, this is only possible in Linux, but installers wants the possibility to change this also by themself in webinterface.



Theo Derks - NL (distributor) 1 year ago in Server Solutions / Linux Server • updated 7 months ago 2


after hours and hours of testing, installing, contacting support (thanks Oleg ;-) ), i found out that you can expect problems with some brands SD-Cards.

i used Kingston SDCIT/16Gb and SDCIT/32Gb cards with brand new Raspberry Pi Model 3, and have had much troubles with it.

After googling in the internet, i found out these cards are not 100% compatible with RaspBerry Pi.

So, please, take care for the right brand and type (also the type is important) using in RaspBerry Pi.



Theo Derks - NL (distributor) 2 years ago in Server Solutions / OnBox Server • updated by Oksana (expert) 5 months ago 7
Every installer knows: you have to use static IP-addresses in Home Automation devices.

This is one of the most important issues for a stable Home Automation configuration.

But in the current version, the OnBox can not be configured with a static IP-address. This is absolutely needed in the first public release of iRidium Server for OnBox. NO INSTALLER will use Unix commands to set a static IP-address in the OnBox. NO WAY.

Please add a graphical and easy-to-use module to configure ALL network settings of OnBox iRidium server:

Configure DHCP or Static

If choose static:
Subnet mask



Oksana (expert) 5 months ago

Hello Theo,

Now we have a the OnBox system image file for testing (static IP and ntp time):


Instruction for OnBox Firmware Replacing:


You should use version server from 1.0.11

Евгений Лешкив 2 years ago in Server Solutions / UMC Server • updated by Oksana (expert) 1 year ago 7

Как настроить дату и время на UMC сервере?

E меня сейчас 1970й год

Oksana (expert) 1 year ago

Добавим в вэб панель, этот функционал.

Выбор часового пояса и установка даты и времени.

Theo Derks - NL (distributor) 6 months ago in Server Solutions / UMC Server • updated by Aleksandr Romanov (CTO) 2 months ago 2


In The Netherlands and many other countries in Europe, we have daylightsavingtime now. (time is set 1 hour forwards).

Now, it's not possible to set the date and time correct in UMC Server.

For example:

It's 2th april 2017 now - 22:18 hour

If i set this time into UMC- server webinterface, the only possibility is to set it like this:

But then, the result of this, the time is changed to 23:18 !

Please correct this, this is a big bug for the server, because now time-based clocks are not working ok!



Waiting for user's reply
Oksana (expert) 2 years ago in Server Solutions • updated 2 years ago 1

Cash the data downloaded to the client for their displaying in a trend for one session.



1. Open the page with the trend.

2. The client starts downloading data from the database and display them in the trend.

3. Close the page with the trend (or minimized i3 pro).

4. Open the page with the trend again.

-> the data start to download from 0 - it takes time and if the data are received via the mobile Internet it also takes extra traffic.

What we want:

4. Open the page with the trend again

-> the data which were downloaded before are uploaded from cash and only new data is downloaded from the database (if there was some time since you last opened the page with the trend).

The data which are not required (out of the displayed Range) can be gradually deleted.

Dmitrii P 2 years ago in Server Solutions / Windows Server • updated by Oksana (expert) 1 year ago 2

[ Filter ___________] for [x] Commands Name [x] Feedback Name [ apply] [clear]

[ Commands Filter ___________] [apply] [clear]
[ Feedback Filter ____________] [apply] [clear]

the second is preferrable, as command name may have nothing in common with Feedback name.

Theo Derks - NL (distributor) 1 week ago in Server Solutions • updated by Aleksandr Romanov (CTO) 1 week ago 1


We want a more workable logging in iRidium server.

For example:

a log-entry when server is rebooted (manual)

a log-entry when server is rebooted after power supply failure

a log-entry when internet is not available

a log-entry when clients are not accessible.


So --> more detailed and usable log-entries to debug errors in case of problems.



Waiting for user's reply
AlexDr 3 months ago in Server Solutions / Linux Server • updated by Aleksandr Romanov (CTO) 1 month ago 42

Я создал на сервере (linux) канал и одноименный тег. При изменении канала значение, передаваемое в канал, сохраняется через вызов серверного скрипта (функция задана в Script Modiefer) в одноименном серверном теге:

function SaveChannelTagState(in_Type, in_Name, in_Value){
    IR.SetVariable("Server.Tags."+in_Name, in_Value);

На сервер значение тега меняется - видно через веб интерфейс.

В настройках тега установлены параметры 

  • Persist = Yes
  • Store in DB = Signed 32bit

Но стоит перезалить проект на сервер или перезагрузить сам сервер - все значения тегов теряются. Причем как-будто он берет значения из какого-то кеша. Значения устанавливаются не нулевые, а какие-то промежуточные, когда-то давно установленные.

Как это исправить? Надо чтоб значения тегов запоминались на сервере.

Oksana (expert) 2 months ago


Задача вошла в версию 1.1.7

Under review
Barry Jones 4 months ago in Server Solutions • updated by Martin Lang 4 months ago 4

hi is there a way of sending a http command to server to trigger a macro,

I.e. To control IR device connected to a global cache device,