On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.

Please subscribe to the Change Log to know our news


Передача значения канала обратной связи HDL в переменную

Андрей Покровский 2 years ago in iRidium Script • updated by Ekaterina (head of support) 2 years ago 12

Подскажите пожалуйста конструкцию скрипта для передачи значения канала обратной связи HDL в переменную.

Пробовал так:

var motion=IR.GetVariable("Drivers.HDL-BUS Pro Network (UDP).Tags.HDL-MC48IPDMX_231:Sequence Control");

и так:

var motion=IR.GetVariable("Server.Tags.HDL-BUS Pro Network (UDP).HDL-MC48IPDMX_231:Sequence Control").

Значение motion остается равным 0, хотя значение тега изменяется.

Значения System Tokens и Driver Tokens передаются без проблем.


var hour=IR.GetVariable("System.Time.Hour");

Under review

eBus Vaillant driver?

Martin Lang 2 years ago in Products / Other drivers • updated by Dmitry - support (expert) 1 year ago 2

Do you know about any eBus implementation solutions? eBus is used for example on Vaillant Heating/Solar systems. Interfacing with eBus is done via interfaces like this one:



i3 Pro menu

Theo Derks - NL (distributor) 2 years ago in Applications / i3 Pro • updated by Oksana (expert) 2 years ago 1


In the new menu in i3 Pro, it would be great if we can see which account is logged-in at a specific moment. This is not showed at this moment in the new menu.

Please add.



Oksana (expert) 2 years ago

Hello Theo,

You should add this info in your Kabinet

Oksana (expert) 2 years ago

Здравствуйте, Андрей

Если бы в Setup на сайте находился троян, то к этому времени были бы сообщения от других пользователей. Тем не менее, мы повторили ваш путь, скачали заново и проверили сам файл сетапа, а так же папку с установленными файлами при помощи Microsoft Essential. Вирусов не обнаружено.

Попробуйте сделать полную проверку вашего компьютера.


Emulator. Меню управления аккаунтом и проектами обработка по F7

Vladimir Bykov 2 years ago in Applications / i3 Pro • updated 2 years ago 10


В разделе инструкции, посвященному эмулятору вы пишите, что по F7 должно открываться меню управления аккаунтом и проектами.

Однако, по факту меню не открывается.

Как его все-таки вызвать, чтобы залогиниться?


Galaxy View support

Andrey Honich 2 years ago in Applications / i3 Pro • updated by Oksana (expert) 1 year ago 7


I'm using Samsung Galaxy View as my room control panel. But unfortunately it's not among compatible devices for i3 pro. Are there plans to support this device for i3 pro please? For me it is very important. I2 control is supported on Galaxy View.

Oksana (expert) 1 year ago

Hello Andrey,

Please, check, now, you can find i3 pro (1.0.5) on Google Play for Galaxy View

Not a bug

Server project, UDP Showing a online when it is not

Jackie Roos 2 years ago in Server Solutions • updated by Oksana (expert) 2 years ago 8


In a server/client project the UDP driver online token is showing as online when the server is connected, but the device is not. Tested only in Windows Server.

Eg in server, to make sure, I tried setting the host to empty, and another IP that is does not have any device connected on my network.

BUT! The driver online token still shows online as true. The only time the state is changed to offline is when the server is not running

Please fix, thanks


Hello Jackie,

This is situation is normal for UDP protocol.


User Datagram Protocol is a simpler message-based connectionless protocol. Connectionless protocols do not set up a dedicated end-to-end connection. Communication is achieved by transmitting information in one direction from source to destination without verifying the readiness or state of the receiver.

Server Sends commands to offline devices

Jackie Roos 2 years ago in Server Solutions • updated 2 years ago 2


When server is not connected to a device, it will still try and send a command (tested only in Windows server). This could have undesired side-effects as it could cause an error in the driver.

Please change server so that if a device if offline, even if the client sends a command, no commands are sent

In the short term I will put this in my drivers (Except UPD drivers as they report as online when they are not: http://support.iridiummobile.net/topics/9006-server-project-upd-showing-a-online-when-it-is-not/)

   IR.AddListener(IR.EVENT_CHANNEL_SET, THIS.DEVICE, function(command, value){                      
      if (IR.GetVariable("Global.Online")){    


Waiting for user's reply

The way commands are added affects if value is truncated or not

Jackie Roos 2 years ago in Applications / Studio (Server editor) • updated 1 year ago 7

1. EXISTING button and command that was created by opening iRidium 2 project into iRidium 3,and the parameter sent to server is 254

Value is truncated to 254:

2. Copy and paste EXISTING button that was created by opening iRidium 2 project into iRidium 3 with different command but existing same value (254/203/1). Change command to Enable On,

Value is not truncated (254/203/1)

3. create a new button and drag on the command, enter the value 254/203/1

Value is truncated to 254:

Please fix ASAP

Under review

external access to database

Daniel Petrini 2 years ago in Server Solutions / Windows Server • updated by Oksana (expert) 2 years ago 1


I would like to feed the Iridium server database with external device data, so that I can show in Visualization on panels as a trend.

How can I feed data to Iridium server?
I checked Rest API in http://dev.iridiummobile.net/REST_API/en but it has no information about how to access the database from external devices.