When do you plan on releasing the TV network control modules for brands like Sony, Samsung & LG ?

Personal when we will have a module for Yamaha equipment, as has already been done for the equipment of Onkyo and Marantz.

Hi,

at this moment, setting or displaying degrees (for temperature) is only possible in 'rounded numbers': e.g. 20 degrees, 24 degrees.

Installer ask for 24.5, or 20.3, or 20.8 degrees.

Is it possible to implement this in i3 lite modules?

Thanks

Theo

Hi i´m erik from juno automation, in brazil. I´m testing iridium lite with sbus automation cable and wifi and it´s working very well, but the relay modules(wifi and cable) does not working properly when i click the relay button the first time it works correctly and the the button stops working. the button change the color and a animation(thinking animation) does not stop. If I close the app and restart the relay buttons works again. What can i do to resolve this issue?

Thanks, Erik Matsumoto.

I use a KNX IR device that allows me to send different IR values for 1 (explicit on) and 0 (explicit off). I can also assign a scene no. The scene recall sends multiple IR commands.

Please incorporate additional parameters for the KNX under button settings to select switch that can be given Value 1 for on and 0 for off. for example we should be able to use type as 1bit and Subtype as switch.

In addition we should also be able to use type as Scene Number and Subtype Scene Number. Just like the KNX button implementation.

How can third party app be opening from i3lite be opening using URL scheme?

for example nflx://

If we accidentally add a device in KNX IR module, how do we delete the device without having to delete the entire module.

It's very important to have a possibility to access server sitting behind a router which has dynamic DNS name

Having a Modbus TCP server implemented on lite platform.
Defined IP address and port at the setup time.
Can not change the address afterward...

I have the same problem as Nick Sutton.

The heat controller of HDL is disabled. I cannot adjust the mode or temperature.

It reads the correct temperature and I can turn on and off the heat.

But not adjust the mode or temperature.

This is still an issue after the update!

Knut