Hello.
In the panel project you specified the correct Host and Port for the server?

Yes, right.

Hello
To activate macros in Google home, you can also use: "set [macros name]".

Hello
To control AC Fan Speed and AC Mode change, use macros in the i3 lite application.
To activate macros or scenes in Amazon, use the "turn on" command, which we cannot change.

Добрый день.

Чтобы связать hdl-кнопку с камерой, вам необходимо использовать модуль Camera Wizzard, после добавления через него камер в приложении i3 lite нужно сделать следующие действия:
1) добавить правило в приложение i3 lite
2) в правиле выберите вкладку «КОГДА» и нажмите «Добавить событие», затем выберите кнопку HDL в списке устройств и выберите условие Press/Release (нажата или отпущена)
3) на вкладке «ТОГДА» нажмите «Добавить действие» и выберите необходимую камеру, где выбираем действие "Show popup"

После создания правила, когда кнопка HDL нажата/отпущена, i3 lite отобразит полноэкранный попап с выбранной камерой.

Hello, to see what Google Home is related to Gate you need:

1. In the Assistant application, go to the settings menu

2. On the "Home control" tab

3. In this window you can see that the application is connected to "i3 Control" and you can also see the list of devices managed in the project with Google Home

To verify the correctness of the connected account, you need to log off to "i3 Control", when you log in, it specifies the share used to connect to Google Home.

How Gate for Google Home works:
1. Upload a project with your devices onto iRidium cloud (if you already have your project on the cloud you can skip the step).
2. Go to http://www.iridiummobile.net/my-account/services/, authorize and select your project. You will need the secret key to setup Google Home module.
3. Add the "Gate for Google Home" module to the project. Module automatically receives the secret key.
4. Select "Gate for Google Home" device in configurator, open settings for the device (gear icon on top right) and select components of the project that you want to control with Google Home. By default you have all devices in project selected.
4. Upload the project to iRidium server.
5. Go to home control section in Google Home app and select "i3 Control" in device list (on the step you need to have Google Home app installed and configured).
6. Authorize, select the project and press the "Link project" button.
7. Devices are ready and can be controlled with Google Home.
To control a device with Google Home use the device name from i3 lite app. Names also can be changed in Google Home app

To create a macro:
1. go to the macros tab

2. To add a macro, click on the plus button (you can also press "create a macro")

3. Enter the name of the macro and click OK.

4. In the appeared window in the submenu "DO" click "Add action" to add an action for the device

5. In the next window, select the type "Device"

6. We choose the device we need (in our case, for example, a relay is taken)

7. In the window that opens, select the action that will occur when the macro is activated.

To add a macro to Gate:
1. Go to the module, click the gear button

2. In the "Settings" menu that opens, select "Macros"

3. In the window that opens, check the required macro and click "Done"

4. To make changes, the project must be published to the server.

Hello, now the button control can be implemented in the AMX module via relays.
The operation of the button with Gate will be implemented through macros within 3 days, allowing you to control the button in Google Home by activating the macro.
In the future, the button control will be implemented without the use of a macro.

After adding the module to the project, open "device" tab

For adding a command click on the gear button

In the opened window, fill fields, where "Input name" is the command name in the project, and Input UV command (number) is the command number in the HDL UV / Logik device.

To add, click the "Done" button.

Widget created by the teams in the project