Welcome!

On this forum you can discuss iRidium with other users. iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.

Please send your questions to support team as a private messages.


Please subscribe to the Change Log to know our news

0
Answered
Patrick PETIT 2 years ago in Applications / Studio (Server editor) • updated by Oksana (expert) 2 years ago 1
Hello,

I use the server (for test) with a i2control client and with a KNX driver.
And with the server it's OK for the KNX driver (commands and feedback).

Thank you to answer these questions, I would like to move forward on the server test project (data base) with a panel control project (i2control).

1-
In the documentation it writes (see above): Virtual variables are available for editing from a control panel. You mean from a control panel in the Studio development tool ?
I understood that the Virtual-tags could be changed from a control panel (i2control). It is not the case ?

2-
The Virtual-Tags variables is the database on the server ?

3-
In I/O and Virtual-Tags:
This point is not clear and is not explained.



What does the "Persist"?
In French is thought understand: a saved data. It is not in your document

To save a data in the database must select only the data type "Stored In DB" ?
Or also I have to put Persist = Yes

3-
Is it possible to transfer variables from the database (Virtual-Tags) to a client application i2control ?
Is it possible to transfer data from a client application i2control to the database (Virtual-Tags) server ?
And if yes, how do I transfer the data ?

Thank You
Best Regards

Patrick

0
Under review
Евгений Лешкив 1 year ago in Applications / i3 Pro • updated by Oksana (expert) 1 year ago 2

Some trouble.

When rotating element that is fully on the page everything is ok.

When trying to rotate element that is partially over the screen only visible part is rotating.

0
Completed
Dmitrii P 2 years ago in Applications / i3 Pro • updated by Oksana (expert) 1 year ago 3
Сначало ругается -> потом конектится -> и исчезает.

Красная надпись должна появлятся по факту (нет локальной -> поищем серверную -> нет сервера/свободных лицензий/проблеммы и тд...), а не при старте.
Answer
Oksana (expert) 1 year ago

Здравствуйте,


Сейчас сделали 10 секундную задержку после загрузки проекта (1.0.0.6309). Должно хватить для подключения, даже если связь плохая.


0
Answered
Jackie 2 years ago in Applications / Studio (Server editor) • updated by Oksana (expert) 2 years ago 2
Hi
http://support.iridiummobile.net/topic/819092-otladka-servera-logirovanie
I cannot find what is described in the article above to adjust the server logging levels


Please tell me where to look to find these settings, am I in the right version?
Version 3.0.0.18068

Eg
1. Panel project Settings:

2. Server Project Settings button is disabled
3. Panel project driver properties:

4. Server project Drivers

Answer
Oksana (expert) 2 years ago
Log level can be changes in several ways:
1. Setting in iRidium GUI Editor (Setup of system logs)
- Click Settings

- You'll see the following in the window that appears

In this window you can change settings of the system log level.
2. Setting in iRidium GUI Editor (Driver system)
- Every driver has its own system log level. It's located in the driver settings.

In this window you can change settings of driver logging.
0
Answered
Margolin Oleg 1 year ago in Applications / i3 Pro • updated by Oksana (expert) 1 year ago 12

Создан «Server Project».

В «Server Project» создан «Server.Tags.Virtual 1».

В скрипте создан счетчик от 0 до 99 с шагом +1 раз в секунду.

Значение счетчика посылается в созданный тэг.

Для контроля в лог выводится значение счетчика и значение тэга.

Изменение этого значения я вижу как в логе, так и в web-интерфейсе сервера в закладке «Work/Feedbacks».


В настройках «Server.Tags.Virtual 1» я выбирал разные варианты:

вариант 1

Store In DB: Signed 32bit

DB Save Strategy: Deadband

Deadband = 0


вариант 2

Store In DB: Signed 32bit

DB Save Strategy: Deadband

Deadband = 1


вариант 3

Store In DB: Signed 32bit

DB Save Strategy: Interval

Interval = 1 sec


вариант 4

Store In DB: String UTF8


Затем я посылал файл в трансфер, запускал сервер, открывал web-интерфейс, видел что данные тэга меняются и на графике «Work/Feedbacks» отображаются.

Однако, во вкладке web-интерфейса «System/Database», в пункте DataBase Size: 0b постоянно для всех вариантов 1…4.


Также я делал «Panel Project», из существующего «Server Project», и создавал «Linear Trend». В нем я также не мог отобразить состояние «Server.Tags.Virtual 1» (перебрал несколько настроек).

У меня сложилось впечатление, что значение счетчика не пишется в базу данных.

0
Waiting for user's reply
Dmitrii P 2 years ago in Applications / Studio (Server editor) • updated 2 years ago 2


The idea is ether to add fields that can't be edited that display 2 and Free styles for 3-level address or to show in the editable parameter for KNX IP Router -> Group Address Styles.



3-Level; 2/2/2 = 00010/010/00000010b
2-Level; 2/514 = 00010/010 00000010b
Free-Level; 4610 = 00010 010 00000010b




A project can be switched between levels 2 and 3 in ETS. But if it is FREE, one has to think that 2/2/2 has to be sent to 4610 address.
0
Voting
Theo Derks - NL (distributor) 1 year ago in Applications / Studio (Server editor) • updated by miro.suchanek 4 months ago 5

Hi,

When importing .knxproj-files in iridium Studio, commands are visible in 'Feedback' tree and feedbacks are visible in 'Command' tree.

And example:
A command to switch on/off a light, is also visible in 'Feedbacks'.
A feedback to show the temperature from a Weather station is also visible in 'Commands'.

It takes much time to cleanup all these wrong imported items: installers have to delete manually all feedbacks that are visible in 'Commands', and remove all commands that visible in 'Feedbacks'.

We expected this was fixed after 4 years of experience with KNX...


Please fix.


Thanks


Theo


0
Waiting for user's reply
Alessandro Munari 1 year ago in Applications / Studio (Server editor) • updated by Oksana (expert) 1 year ago 1

Hi team, happy new year. A new year is coming and a new idea is coming too.


When I convert an old project into a new iridium panel project all the drivers will be lost, all the associations will be lost because if a put all the old driver in the server project the name will change. It would be a good idea if you create a simple tool to export old drivers (all togheter) into excel format from the previuos version and import the same file modified (users will made all the changes they need in excel, more easy) and then read the drivers from that excel table. This will be very useful when you have many drivers and associacions. Or if for you will be more esy done this directly in iridium, but I think is more difficult than using an excel table, like the one used to import modbus register already done. Sorry for my explanation but if you need more detailed info, fell free to ask. Best regards, and happy new year.

0
Answered
Андрей 2 years ago in Applications / Studio (Server editor) • updated by Dmitry Shulgin 2 years ago 6
Подскажите по драйверу modbus tcp server (порт 502).
С учетом выхода iridium server получается есть два варианта настроить подключение панелей iridium к iridium server'у:
1. Связать проект панели с проектом сервера, подключение панелей на порт 30464 сервера.
2. Использовать компонент modbus tcp server на стороне iridium server, а на стороне панелей поднять modbus tcp master, которые и будут связаны с сервером через порт 502. ИЛИ это не возможно?
0
Answered
Dmitry Kheymits 2 years ago in Applications / Studio (Server editor) • updated 2 years ago 22
Вопрос отсутствует в Wiki, хотя есть заголовок. Насколько я понимаю для панели не требуется отдельной лицензии, если есть серверная. Тогда как загрузить? Трансфер для панельного проекта требует лицензии.
И попутный вопрос: должен ли работать эмулятор в панельном проекте при запущенном сервере (проект на сервер загружен)?