Поделитесь своими идеями, пожеланиями и примерами в этом разделе. Идеи, за которые голосуют чаще всего, будут реализованы быстрее!
Мы перевели нашу службу поддержки на новую систему технической поддержки. С 17.01.2022 мы отключили возможность создавать обращения через личный кабинет userecho. Теперь все запросы обрабатываются по почте на support@iridi.com .
Спасибо вам за ваше понимание и хорошего дня.
Похожие темы не найдены.
+1
Завершен
An Alternative Clipsal CBus Driver for CGate
JAMware has written a Clipsal CBus CGate Driver.
The driver is a fully functional driver with the following features:- Options of SITE licensing or DEVICE licensing
- Free DEMO version - Download today
- Full, free technical support
- Multiple networks
- Applications Supported
- Lighting
- Enable
- Trigger
- Feedback from Measurement Data
- Feedback from HVAC (Thermostat)
Please Note:
The JAMware C-Gate driver requires an existing iRidium Pro License. This can be ANY iRidium Pro License, including the AV & Custom System Device License Pro and Pro Site licenses. Therefore you must also purchase an iRidium license through your iRidium mobile account as you normally would.
Pricing for the JAMware CBus CGate Driver (in addition to iRidium licenses)
- SITE license $123.00 USD
- DEVICE license $ 41.00 USD
To Buy:
- Send your HWID's (for device licenses) or serial Numbers (for site licenses) to iridium@jamware.co.nz
- We return the sample project with the driver ready to merge into your project
We also offer a full project-build Programming Service including options of
- using your graphics and template or we provide graphics and template (see sample projects below)
- 3D floor plans
- scripting to add extra features
- driver writing
- Remote Access setup to allow your customer to access the project when off-site
- URL updating of projects (no more site visits to update projects)
- Size of project (numer of controlled devices, light data points etc)
- If graphics are provided
- If template is provided
- Sample project 1- Demo of a house plan, containing lighting, AV, security, camera, weather: Watch on YouTube
- Sample project 2- Demo of a tabbed layout with a live project, containing lighting, AV, security, camera, weather. All changes in state are based on feedback from the devices: Watch on YouTube
- Download and fillout the Quotation Spreadsheet
- Download and complete the Non-disclosure agreement to protect your IP -
- Send the completed spreadsheet and NDA to iridium@jamware.co.nz
- We will give you a fixed price quote within 3 business days (New Zealand time, +13GMT)
0
Отвечен
Cbus shutter control
Hi,
Is anyone able to give some pointers as to how I work with a CBus shutter control. Not sure of the button type/config I need.
Keeping the default settings from the CBus Cgate driver (as lighting app and immediate ramp) with a trigger button lets move the blinds in one direction only.
Have tried cloning the command and changing to on/off but wasn't able to get it working.
Thanks,
Damian
Is anyone able to give some pointers as to how I work with a CBus shutter control. Not sure of the button type/config I need.
Keeping the default settings from the CBus Cgate driver (as lighting app and immediate ramp) with a trigger button lets move the blinds in one direction only.
Have tried cloning the command and changing to on/off but wasn't able to get it working.
Thanks,
Damian
Ответ
Olga (expert)
10 лет назад
Dear Damian,
Please see the example of using the button here: CBusTestBed_iPhone (button).irpz
Commands are assigned to the button using Send Number. Then write a number depending on the button function (Up = 255).
If you want to control from 1 button, then you have to use scripts. Please describe in details what you want to get from the button (for example, what will happen to the button if you click on the it in iRidium - your curtains go up and then you strop them using the wall panel, not the interface. In what sequence should the commands be sent when clicking Up/Down/Stop? etc.)
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Please see the example of using the button here: CBusTestBed_iPhone (button).irpz
Commands are assigned to the button using Send Number. Then write a number depending on the button function (Up = 255).
If you want to control from 1 button, then you have to use scripts. Please describe in details what you want to get from the button (for example, what will happen to the button if you click on the it in iRidium - your curtains go up and then you strop them using the wall panel, not the interface. In what sequence should the commands be sent when clicking Up/Down/Stop? etc.)
Sincerely yours,
Olga Ermakova
iRidium mobile Team
0
Отвечен
C-Bus Load Completed Event
HI,
Could someone please let me know what the event I should be listening for once C-Bus has finished loading?
I want to run some script post the connection to CBus so I can display a "percentage of lights on" label.
Thanks,
Damian
Could someone please let me know what the event I should be listening for once C-Bus has finished loading?
I want to run some script post the connection to CBus so I can display a "percentage of lights on" label.
Thanks,
Damian
Ответ
Olga (expert)
10 лет назад
Dear Damian,
If you need the event which will be activated when after the application start all feedback from C-Bus is received, then we don't have such event.
If you need the event of when the driver connected to the equipment (EVENT_ONLINE), then it doesn't work for the C-Bus driver.
We can recommend you to set up delay after the application start and then monitor the Online token (see the project in the attachment). The delay has to be selected individually for your installation after checking in the log when the last feedback from the equipment comes.
C-Bus SetInterval Status.irpz
Sincerely yours,
Olga Ermakova
iRidium mobile Team
If you need the event which will be activated when after the application start all feedback from C-Bus is received, then we don't have such event.
If you need the event of when the driver connected to the equipment (EVENT_ONLINE), then it doesn't work for the C-Bus driver.
We can recommend you to set up delay after the application start and then monitor the Online token (see the project in the attachment). The delay has to be selected individually for your installation after checking in the log when the last feedback from the equipment comes.
C-Bus SetInterval Status.irpz
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Сервис поддержки клиентов работает на платформе UserEcho