i3 Lite

закрытый форум для бета-тестеров

Мы перевели нашу службу поддержки на новую систему технической поддержки. С 17.01.2022 мы отключили возможность создавать обращения через личный кабинет userecho. Теперь все запросы обрабатываются по почте на support@iridi.com .

Спасибо вам за ваше понимание и хорошего дня.

+4
Идет голосование

Ability to add categories like Cameras, AV, Climate to main page

Govinda Raja 8 лет назад обновлен Андрей Григорук 7 лет назад 4 1 дубликат

Currently only floors and rooms can be added to main page. Please give us ability to add Categories like cameras, AV, Climate, Security etc to main page.

+3
На рассмотрении

Deactivation of i3 lite server

Theo Derks - NL (distributor) 7 лет назад обновлен Donatas Kasparavicius 5 лет назад 16

Hi,


When an iRidium lite server is activated, and is known in iRidium lite, it's possible that i3 lite server changed his IP-address (after reboot, after installing new router, etc).


Then, when the server is found in i3 lite, and 'activated', it's not possible to de-activate the server.


Please make this possible.


Thanks


Theo


+2
Идет голосование

change icon color

Thales Cavalcanti 7 лет назад обновлен Aleksandr Romanov (CTO) 7 лет назад 1

I saw that do not have a icon to Power ON and other to Power OFF, is it possible to change the button color to do this, use the same icon but, green to ON and red to Off?

+1
Отвечен

domintell scanner

Wouter Verbeeck 7 лет назад обновлен Slava Zhuravlev (expert) 6 лет назад 25

Hi,


I'm trying to setup my iridium gate to work with i3lite and Domintell.

Once the gate is setup for use, do I need to install the homekit module?

If yes, what homekit code do I need to use?


I seem to have trouble getting it started


kind regards,

Wouter

+1
Запланирован

room organiser

Wouter Verbeeck 7 лет назад обновлен Ilya Markov (expert) 7 лет назад 1

Hey there,


Just ran some testing on i3 lite with Iphone7 again. Domintell system with 2x DBIR01 relay, 1x button(1x), 1x button (6x), dimmer module, shutter module (latest 2 are not tested today)

Clean install of i3lite, new project created. No server


Results:

When creating the very basics interface, I'm organising my home.

So far the following things I find an issue:

- When I choose from 'template' house, I can't insert more than 1 bathroom, as there is already one listed on the second floor. I understand this is the case for other rooms as well. To fix this, I have to add a different room, change the name and change the icon. 

- Once I inserted some rooms, I would like to organise them. Make a different order. This does not seem to be possible.

- I cant't find an Icon suitable for a basement (minus 1 for example?)

- After scanning with Domintell Scanner, I get the names of the different relays on the DBIR01 from the Domintell system (seems to work fine, I'll change in other post concerning the relay names.

- After assigning relay widgets to rooms, I try controlling the relays with the widgets. As stated in another post, the relays can not be switched. However, when i change a relay by domintell switch or with programming interface (Domintell), I do receive the feedback from the relay's status. However, this doesn't work in the system configuration section.


I hope this gives you some ideas.


We really look forward to working with the i3lite app and Domintell as we have more projects pending.


Best regards,


Wouter


+1
Запланирован

Processes in i3 Lite

Theo Derks - NL (distributor) 8 лет назад обновлен Aleksandr Romanov (CTO) 7 лет назад 1

Hi,

Installer can (has to) create project on tablet, and save in the cloud.

Why he need his iRidium account (on a PC) to attach a license to this project?

Why he can not select an already paid license (of trial), and attach this license to the created project?

Or is this already 'in plans' to develop this integration?


Thanks


Theo


0
Отвечен

Satel i3 lite module

Teo Tudor 5 лет назад обновлен Aleksandr Romanov (CTO) 5 лет назад 2

Hi,

Concerning the new Satel Integra module on the store I was wondering what the "ID" means when adding a widget, for example a button.

I can not find an option in Integra where I can assign and ID or anything else to a function and it isn't explained anywhere.

In short can I get an explanation on how this works and what I need to do to make it work.

The module says it is online for me.

We have an Integra 64.

We also have a KNX module in the Integra but from what I see it doesn't matter for this.

Thank you

0

Delay in routine after movement of sensor

fredrikml 5 лет назад обновлен Dmitriy Shilyaev 5 лет назад 9

Hi,

I have a garage door with an logic sensor which detects that the door is closed or open. I also have movement sensor in the garage. I am trying to make a routine which closes the garador (if it is open) and there is not any movement for 10 minutes. However I am not able to get the delay working as planned. 

I think the problem is that it says when Garage door åpen OR there is no movement, DO delay and thereafter close. 

I guess it should be AND and not OR, but not able to choose between OR and AND

Image 34311

0
На рассмотрении

Format for CSV file in Modbus TCP driver

Célio Silva 7 лет назад обновлен Slava Zhuravlev (expert) 7 лет назад 1

Hi,


I see that there is a way to upload a file with the equipments in the Modbus TCP. What is the format/columns of the file?

0
Не ошибка

scrolling in windows i3 lite app

Johan van de Glind 7 лет назад обновлен Aleksandr Romanov (CTO) 7 лет назад 2

I have like 20 sensors, but i cant scroll down in the listImage 21558
there are multiple preset names, but i can't scroll down
Image 21559


i can drag down but i cant scroll down, i think that is a problem



Сервис поддержки клиентов работает на платформе UserEcho