Hello, I have iPad 1 with i2 control 2.0 for testing purposes (many of my customers have the same iPad). On my PC I upgraded iRidium to the latest one - 2.2.3.
Unfortunatelly I just found out, that when I try to update GUI on my iPad1, it is not possible - I receive "You use old version i2 control, please update your application to the version 2.2 or late" message.
But, on iPad1 I'm not able to download i2 control 2.2, due to old version of iOS (and this iOS I'm not able to update due to Apple restriction - iPad 1 is not supported for newer iOS).
So, it means, that only way how to use my old iPad 1 (and many of my customers too), is to keep installed also iRidium transfer and GUI Editor also in old - 2.0 - version?
And if yes - will it work on the same PC with iRidium 2.2.3 - I have a bad experiences with this, because both versions of Transfer save its data to the same location? Is there any way, how to change this working directory for each (2.0 and 2.2) Transfer version?

We are testing the iridium module in Android tablet and it connects to itunes ok but suddenly the pop up "itunes/disconnected" page appears and after pushing "try again" doesn't connect again, is always loading.

Using the emulator from the Gui Editor in a local PC goes fine.

Maybe firewall is disconnecting the link between tablet and pc with itunes???

Hello,

First of all, sorry I do not speak English and I hope my question is clear enough.

I do not know the SIP protocol, so I appreciated being able to use the iRidium Mobile SIP client (javascript module).
I made some tests with 3 x SIP clients:
- 1 SIP client (SIP Javascript iRidium Mobile module) installed on a desktop PC (with windows 7)
- 1 SIP client (SIP Javascript iRidium Mobile module) installed on a laptop PC (Windows 8.1)
- 1 SIP client (SIP Javascript iRidium Mobile module) installed on a tablet (android 4.1.1)


The 3CX SIP server is installed on the laptop PC (Windows 8.1).

For the tests I have not audio/video door. I did the tests with only the 3 clients iridium described above.
I configured the 3 clients and 3CX Phone System in accordance with the Note: http://wiki2.iridiummobile.net/Setting_up_SIP_Telephony_in_iRidium#Setting_up_SIP_Servers
 
The calls made by each client are working. But after a time, one or more clients no longer appear on the server (telephone) and are no longer managed.
 
I removed the sleep of the laptop PC on which the server is installed and this seems to be the solution to the problem.
Next, I programmed on the android tablet where a SIP client is installed, a sleep after a few minutes. And exactly the same problem.
 
You cannot program a sleep on the tablet or on the PC with SIP management ?

Best Regards,

Patrick

I'm control Lighting of myhome system. I want to expand system.I don't know setup local bus and INT of iridium. Now , I want to send 2 command to 2 address (A=1,PL=1 ,interface =main ) and ( A=1, PL=1, interface =2. I read document of automation system , I see they are setup I3,I4 of actuator.
I use to driver MyHome

Hi,

Is there a way to delete a device that has been created by an script?

I have an UPNP device which I want to delete.


Thanks,


Roger

Hi to all, I'm locking for a solution that use JS to write some variable (for example a temperature read from KNX sensors) to an excel sheet or to a text file. Is there any possibility to write such files ?
And finally to save the file to a network location such a NAS or an FTP folder.
Thanks in advance for the support.

In iridium Editor I have configured TV for Universal switch ,, Some of Rooms Switch not working with the 8 in 1 sensor ,,When i try it manually with the sensor ,it works fine ,, when i am trying to work with the iridum Ipad, It does not work here all 8 in 1 sensor configured IR signals are same,, Here i came to know two models sensor are used for the TV configuaration in that one 8 in 1 sensor model(HDL.MS08M.2C) and second 8 in 1 sensor model (HDL.MS08Mn.2C) ,, Those models have Same IR signal Functions ,, here (HDL.MS08M.2C) model is working fine with the iridium ipad applicatio,,,, (HDL.MS08M.2C) model doesnt work with the iridium IPAD,, BUt Its working by manually as i checked in transmit signal,, It works,, when I try to check it on the iridum application ,, it doesnot work,, ,,

Hi,

When you try to use the sample project found at http://wiki2.iridiummobile.net/Systems_API#Updating_Project_via_Commands and open it GUI Editor 2.2.3 it says that this project is for iRidium Studio.

Thanks,


roger