Напишите здесь описание Вашего форума ...
+7

New iRidium studio 2019

Aleksandr Romanov (CTO) 7 maand geleden in Tips and Tricks bijgewerkt door Anderson Carlos Costa 6 maand geleden 0

The new branch of iR studio 2019 is a completely different architecture and a new user experience. Interface changes will be gradual to simplify the transition from the previous version.


Setup new studio available: https://iridi.com/download/software/v3/

Discussion of the functionality, ideas and errors please send to technical support mail support@iridiummobile.ru with the note "iridium studio 2019".

In this thread, old posts will be cleared.

Now implemented functionality:

https://support.iridiummobile.net/knowledge-bases/22/articles/19384-iridium-studio-2019-istoriya-versij

Nearest plans :
1) Import from ETS

2) GC Cloud

3) Velbus Driver

4) Z-Wave Driver

5) ZigBee driver

6) Bus77 Driver

+2

HDL Enviro Panel module setup in i3 lite.

Dmitriy Shilyaev 4 maand geleden in Tips and Tricks bijgewerkt door Adir Peleg 4 maand geleden 5

After adding the module to the project, fill in the setup, where we specify the IP, Port gate and SubnetID and DeviseID, which are assigned to the HDL Enviro Panel.

After filling up the setup module, in order to add the necessary devices associated with the HDL Enviro Panel, you must click the “plus” button:

In the menu that opens, you can select the devices you need:

When you select a device, a window is displayed in which you must specify the device number, which can be viewed in HDL Buspro (for example, AC):

In i3 lite, this parameter is entered in this field (for example, AC):

After these actions, the widget of the device you need will be added and you can manage it via i3 lite.

+1
Will be answered

Control the routines by script

Christophe MATHEY 6 maand geleden in Tips and Tricks bijgewerkt door Tanapol E. 2 maand geleden 5

Hello Iridium,

I would be interesting to enable/dsable the sever's routines by script.

Get access to the property 'Enable' of routines would be interessting for our end customer..

This point will complet the property of schedule what you are rending access by script...

+1
Under review

MQTT Import

Ferry 9 maand geleden in Tips and Tricks bijgewerkt door Vladimir Ovchinnikov 9 maand geleden 3


Is it possible to import MQTT tags into the server via an import? I have many tags that I want to import. This could be much faster via CSV import.

Thanks

+1
Under review

Read status of UV HDL

Roger Stenvoll 1 jaar geleden in Tips and Tricks bijgewerkt door Slava Zhuravlev (expert) 5 maand geleden 14

Hi!

I am able to set UV command using the UV module in Iridium Lite.

Is it possible to read and display the status of a given UV?

Best regards,

Roger

0
Beantwoord

Limit max characters in an editbox

Naeem 1 maand geleden in Tips and Tricks bijgewerkt door Vladimir Ovchinnikov 1 maand geleden 3

Is there a way to limit the maximum characters in an editbox?
I would like to make a field where you can use a maximum of 3 characters but the .maxLength command does not work.
The .length command does work but I am still able to enter more than 3 characters but then it just gives an error if i use more than 3.

0

I3Lite and Doorbird

Knut Harboe 2 maand geleden in Tips and Tricks bijgewerkt door Dmitriy Shilyaev 2 maand geleden 3

Hi!

Can Doorbird work without SIP server in i3Lite??

Knut

0
Under review

How program token ring in iridium?

Tubi Alvarez 2 maand geleden in Tips and Tricks bijgewerkt door Vladimir Ovchinnikov 2 maand geleden 1


¿Alguien puede ayudarme a programar un anillo de token?

0
Beantwoord

Incoming TCP message

Harm 4 maand geleden in Tips and Tricks bijgewerkt door Vladimir Ovchinnikov 4 maand geleden 5

Hello,

Has someone of you some experience with incoming TCP messages?
I have an TCP trigger in an Axis camera to the IP-address from the iRidium server. I have used port 8888 to send the message.

In the server I have added an TCP device with the IP-address from the Axis camera on port 20.

For testing I have added an script:

var driver = IR.GetDevice("Axis M1065-LW");
IR.AddListener(IR.EVENT_RECEIVE_DATA, driver, function(text) {
var strings = text.split('\r\n');
var string;

IR.Log(text);

});

When I trigger the alarm, I don't see any message incoming.

How can I see the message? What do I miss?

0
Beantwoord

Keep log window open with on EXIT EVENT

Kenny Stoepel 4 maand geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 4 maand geleden 3

I'm using some js code to run IR.EVENT_EXIT. all is working well except that debugging my code is very hard to debug because closing the emulator also closes to Logging window immediatly. 

Is there any workaround that the log window could stay open when closing the emulator?