Напишите здесь описание Вашего форума ...
+7

New iRidium studio 2019

Aleksandr Romanov (CTO) 7 месяцев назад в Tips and Tricks обновлен Anderson Carlos Costa 6 месяцев назад 0

Новая ветка iR studio 2019 - это совершенно другая архитектура и новый пользовательский опыт. Изменения интерфейса будут постепенными, чтобы упростить переход из предыдущей версии.

Setup новой студии доступен: https://iridi.com/download/software/v3/

Обсуждение функционала, идеи и ошибки просим присылать на почту тех.поддержки support@iridiummobile.ru с пометкой "iridium studio 2019".

В этой теме старые сообщения будут подчищаться.

Сейчас реализован функционал:

https://support.iridiummobile.net/knowledge-bases/22/articles/19384-iridium-studio-2019-istoriya-versij

Ближайшие планы:

1) Import from ETS

2) GC Cloud

3) Velbus Driver

4) Z-Wave Driver

5) ZigBee driver

6) Bus77 Driver

+2

HDL Enviro Panel module setup in i3 lite.

Dmitriy Shilyaev 4 месяца назад в Tips and Tricks обновлен Adir Peleg 4 месяца назад 5

After adding the module to the project, fill in the setup, where we specify the IP, Port gate and SubnetID and DeviseID, which are assigned to the HDL Enviro Panel.

After filling up the setup module, in order to add the necessary devices associated with the HDL Enviro Panel, you must click the “plus” button:

In the menu that opens, you can select the devices you need:

When you select a device, a window is displayed in which you must specify the device number, which can be viewed in HDL Buspro (for example, AC):

In i3 lite, this parameter is entered in this field (for example, AC):

After these actions, the widget of the device you need will be added and you can manage it via i3 lite.

+1
Будет отвечен

Control the routines by script

Christophe MATHEY 6 месяцев назад в Tips and Tricks обновлен Tanapol E. 2 месяца назад 5

Hello Iridium,

I would be interesting to enable/dsable the sever's routines by script.

Get access to the property 'Enable' of routines would be interessting for our end customer..

This point will complet the property of schedule what you are rending access by script...

+1
На рассмотрении

MQTT Import

Ferry 9 месяцев назад в Tips and Tricks обновлен Vladimir Ovchinnikov 9 месяцев назад 3


Is it possible to import MQTT tags into the server via an import? I have many tags that I want to import. This could be much faster via CSV import.

Thanks

+1
На рассмотрении

Read status of UV HDL

Roger Stenvoll 1 год назад в Tips and Tricks обновлен Slava Zhuravlev (expert) 5 месяцев назад 14

Hi!

I am able to set UV command using the UV module in Iridium Lite.

Is it possible to read and display the status of a given UV?

Best regards,

Roger

0
Отвечен

Limit max characters in an editbox

Naeem 1 месяц назад в Tips and Tricks обновлен Vladimir Ovchinnikov 1 месяц назад 3

Is there a way to limit the maximum characters in an editbox?
I would like to make a field where you can use a maximum of 3 characters but the .maxLength command does not work.
The .length command does work but I am still able to enter more than 3 characters but then it just gives an error if i use more than 3.

0

I3Lite and Doorbird

Knut Harboe 2 месяца назад в Tips and Tricks обновлен Dmitriy Shilyaev 2 месяца назад 3

Hi!

Can Doorbird work without SIP server in i3Lite??

Knut

0
На рассмотрении

How program token ring in iridium?

Tubi Alvarez 2 месяца назад в Tips and Tricks обновлен Vladimir Ovchinnikov 2 месяца назад 1


¿Alguien puede ayudarme a programar un anillo de token?

0
Отвечен

Incoming TCP message

Harm 4 месяца назад в Tips and Tricks обновлен Vladimir Ovchinnikov 4 месяца назад 5

Hello,

Has someone of you some experience with incoming TCP messages?
I have an TCP trigger in an Axis camera to the IP-address from the iRidium server. I have used port 8888 to send the message.

In the server I have added an TCP device with the IP-address from the Axis camera on port 20.

For testing I have added an script:

var driver = IR.GetDevice("Axis M1065-LW");
IR.AddListener(IR.EVENT_RECEIVE_DATA, driver, function(text) {
var strings = text.split('\r\n');
var string;

IR.Log(text);

});

When I trigger the alarm, I don't see any message incoming.

How can I see the message? What do I miss?

0
Отвечен

Keep log window open with on EXIT EVENT

Kenny Stoepel 4 месяца назад в Tips and Tricks обновлен Aleksandr Romanov (CTO) 4 месяца назад 3

I'm using some js code to run IR.EVENT_EXIT. all is working well except that debugging my code is very hard to debug because closing the emulator also closes to Logging window immediatly. 

Is there any workaround that the log window could stay open when closing the emulator?



Сервис поддержки клиентов работает на платформе UserEcho