we have updated our Sonos to firmware 7.2
and the iRidium Sonos module has stopped working:
Can you please fix
Please, check your version of i3pro app (above 1.1.5) and version of project code
Please, add changing a background color (black for light items and white for dark items or choosing between: black, white and transparent) of Gallery items, because it's very difficult to understand, what icons contain.
When gate installed, it's not clear in i3 lite app which license (for which modules) are active.
It's not showed in i3 lite app (in webinterface it's showed, but that's not accessible for end-user).
please show the current (installed) license in i3 lite app, when gate module(s) is activated.
I have a project for AV automation and I'm using a global cache driver to control the device trough rs-232 port.
My device has the command "<11VOxx0x0D" to control the volume, where the 'xx' is the level of volume that goes from 00 to 38.
I need to create a level that controls this volume without the need of the creation of 38 buttons for it. Can anyone help me?
I have been using a SEETEC 10.1" USB DisplayLink monitor running on an INTEL NUC for some applications. When I tried to run i3Pro, it would only display a white screen for the program. The resolution of the monitor is 1024x600. I did find a work around by placing a monitor EDID emulator on the HDMI out of the NUC and then set the display settings to duplicated at 1024x600.
Can you check to see why i3Pro does not display with a DisplayLink monitor.
i need help, i have iphone 6s, resolution in 1366 pixel, i make 1500 pixel list and scroll correctly, if i make 1500 pixel subpage, and i make static list don t scroll, or top or bottom, help please
hi, i have problem with umc server, in setting, i have knx interface offline, i send command but not work, but in ets5, i see umc knx interface and i can send command knx direct on the bus and work correct, help please
I have created a project token via the editor and have it set to a default value.
after changing this value the new value is not updated anyware when running the simulator.
I have a Windows 10 PC set up as an iRidium Server which has dual NICs:
NIC 1 (AV Network) 192.168.3.1, 255.255.0.0 (no internet access - manually set)
NIC 2 (Campus Network) 10.36.132.x, 255.255.255.0 (internet access via DHCP)
On the PC itself I can see the web server via 127.0.0.1:8888 and 10.36.132.x:8888
From another PC on the Campus network I can see it via 10.36.132.x:8888
However, iRidium does not see the 192.168.3.1 address I have setup for the AV network. Is there a way for it to be accessible from multiple IPs? I noticed when starting up, server lists all the IPv4 addresses available to the machine and it does show my 192.168.3.1 address.
I want to be able to have my AV network operate independent on one Ethernet interface, and use the second Ethernet interface to log in to the server from the normal campus network. Can this be done?
Customer support service by UserEcho