Dear Patrick,

I just noticed that without any action, the number 11 SIP client had been deleted from the server and then added again 1-2 minutes later.

We know about that and change the registration procedure in V2.2.2 a little. But there is no setup for Android at the moment, for Windows and iOS only.

Please see the version for Windows for your testing:
1. Copy the current versions of the files iRidium.exe and Squall.dll from the folder C:\Program Files (x86)\iRidium mobile2\iRidium and save them separately. 
2. Substitute the files in the folder with the licenses from the attachment.
3. Test.

As for the issue, that you cannot find the client on the server, we hope that the changes will fix it.

Sincerely yours,

Olga Ermakova
iRidium mobile Team
iRidium (2).zip

IF all the IP modules (HDL-MBUS01IP.431) is in the same network, you don't need an additional settings.
Use the Host 255.255.255.255 in iRidium and you will be able to control all the devices

Dear Rustem,

The settings of connection to AMX are available for writing via scripts with the following construction:

IR.AddListener(IR.EVENT_START,0,function() 
{ 
    IR.GetDevice("AMX").SetParameters({ Host: "192.168.0.21", 
                                        Port: "12004", 
                                        DeviceID: "1", 
                                        Login: "admin", 
                                        Password: "12345"}); }); 

http://wiki2.iridiummobile.net/Drivers_API#SetParameters

The SetParameters function can activated not at start but after receiving data from the database. The host and port fields should be left empty in the driver settings so that initially the project wouldn't connect to any controller. The , конечно, можно вызвать не по старту, а после получения данных из базы.
The parameter HostIP from the driver tokens is not aailable for writing. The SetParameters function sets all connection parameters at once and you cannot change any of them, if you don't have a password. You need to indicate

Password: ""

There is an instruction for setting up connection parameters in the description of the АМХ driver. Besides commands from iRidium Script API you can use the AMX command Loopback Port. The principles of its work ans setting is not different from the ones for IR.SetParameters

Sincerely yours,

Olga Ermakova
iRidium mobile Team