Add your idea or search for answers in existing topics. The most popular ideas will be implemented faster!
We have moved our support service to a new technical support system. Since 17.01.2022, we have disabled the ability to create appeals through the userecho personal account. Now all requests are processed via mail to support@iridi.com .
Thank you for your understanding and have a nice day.
No similar topics found.
0
Under review
Pansonic Tv IP control
Prashant Mendonca 9 years ago
in Products / AV & Custom Systems
•
updated by Ekaterina (head of support) 9 years ago •
1
Anyone tried Pansonic Tv IP control??
0
Waiting for user's reply
LonWorks Protocol (ISO IEC 14908)
Alejandro de Mingo 11 years ago
in Products / Other drivers
•
updated by Oksana (expert) 10 years ago •
2
Hello,
We are a company which develop LonWorks devices, we are interesting in integrating iridium platform with lon devices but iridium doesn´t support this protocol.
Is there a way to integrate LonWorks with Iridium or a company which develop the driver in iridium control panels?
Regards,
Alex
We are a company which develop LonWorks devices, we are interesting in integrating iridium platform with lon devices but iridium doesn´t support this protocol.
Is there a way to integrate LonWorks with Iridium or a company which develop the driver in iridium control panels?
Regards,
Alex
0
Answered
IR.Log
Dennis Dekker 9 years ago
in Products / Other drivers
•
updated by Theo Derks - NL (distributor) 9 years ago •
6
Is it possible to log the “Dimmer Units” or “Switch/Relay Units” from a Duotecno or KNX driver?
For example:
function tttt()
{
IR.Log(IR.GetVariable("Drivers.DuoTecno Network.Dimmer Units“));
}
0
Answered
Slow to show feedback
We have a KNX site with approximately 200 group addresses and we are experiencing a lag between sending commands and feedback showing in iRidium.
Do you have any suggestions?
0
Answered
Maximum number of MODBUS commands/feedbacks
Hello,
is there a maximum of MODBUS commands/feedbacks in Iridium?
I'm workin on a project with about 4000 MODBUS objects.
Is this gonna work of could this give some troubles?
is there a maximum of MODBUS commands/feedbacks in Iridium?
I'm workin on a project with about 4000 MODBUS objects.
Is this gonna work of could this give some troubles?
0
Merging KNX project files
Hi,
BIG thank you for adding the option to merge a new knxproj file into an existing KNX driver in a project. This works.
One point to note, the text for the question that you are asked when you import a new KNX knxproj file when an existing KNX driver is in the current project.
It would sound better if you said something like, "merge knxproj file into existing knx driver" as opposed to replace, which implies that the current driver will be removed.
Thanks,
Roger
BIG thank you for adding the option to merge a new knxproj file into an existing KNX driver in a project. This works.
One point to note, the text for the question that you are asked when you import a new KNX knxproj file when an existing KNX driver is in the current project.
It would sound better if you said something like, "merge knxproj file into existing knx driver" as opposed to replace, which implies that the current driver will be removed.
Thanks,
Roger
0
Waiting for user's reply
AMX tp4 file visualisation - Touchmap function
Marian Rybansky 10 years ago
in Products / AMX
•
updated by Ekaterina (head of support) 10 years ago •
3
Hello,
I would like to ask you if we have implemented Touch Map function of
Multi-State Bargraph in AMX visualisation ?
It is for "Value Direction" Property of General tab where can be - Vertical,
Horizontal or Touch map ...
Thank you for information
I would like to ask you if we have implemented Touch Map function of
Multi-State Bargraph in AMX visualisation ?
It is for "Value Direction" Property of General tab where can be - Vertical,
Horizontal or Touch map ...
Thank you for information
0
Answered
Remote access for I2control app
HI
I was configured a iridium application for the remote access, before I2control was working fine through remote ly the ip address was appeared in the gate while open the application from other network ,, NOw it works only local, i dont know what i did wrong ,then here follow the application, It does not able to work through remotely
I have done port forwarded in the router and i am sure this was worked that i seen a different IP adress in the iridium gate when i was access through my mobile
Now i dont know why it does not work
I was configured a iridium application for the remote access, before I2control was working fine through remote ly the ip address was appeared in the gate while open the application from other network ,, NOw it works only local, i dont know what i did wrong ,then here follow the application, It does not able to work through remotely
I have done port forwarded in the router and i am sure this was worked that i seen a different IP adress in the iridium gate when i was access through my mobile
Now i dont know why it does not work
0
Answered
How to display the mode and status of KNX HVAC system
Ekaterina (head of support) 10 years ago
in Products / KNX
•
updated by Dmitry - support (expert) 9 years ago •
2
The KNX actuators are responding separate values as below;
Mode: | Comfort | Standby | Night | Protection | Heating | $21 | $22 | $24 | $A8 | Cooling | $41 | $42 | $44 | $C8 |- We are sending heating/cooling value as bit
- And sending the mode as byte
- But the byte value we are receiving is changing according to heating and cooling
- We are sending and receiving the Mode with the separated bytes
Please see the script sample how to do it:
HVAC.irpz
0
Answered
Change Subnet ID by script
Joseanio Galdino 9 years ago
in Products / HDL-BUS Pro
•
updated by Ekaterina (head of support) 9 years ago •
1
Hi All,
Is there a way to change the subnet ID of a HDL device included in a project, by java script ??
Something like :
IR.GetDevice("Relay").SetParameters({Subnet ID: "101", Device ID: "22"})Customer support service by UserEcho
