Add your idea or search for answers in existing topics. The most popular ideas will be implemented faster!
We have moved our support service to a new technical support system. Since 17.01.2022, we have disabled the ability to create appeals through the userecho personal account. Now all requests are processed via mail to support@iridi.com .
Thank you for your understanding and have a nice day.
KNX initial feedback request
Hi,
I was testing the App in KNX Environment (KNX UDP driver). Therefore, i was adding all necessary feedbacks from KNX, including lot of 2byte floating point values. After initialization of the app, i missed lots of them (and also others like 1bit). After investigation, it turned out that the app or the gateway does not send the requests on bus. After initial requests, i can update those values with a read request in knx, those will be updated in the app too.
Looks like that the app or gateway is running into some timeout/ or buffer overflow (if im just requesting a few feedbacks, everything works well)
MDT Gateway SCN.IP000.01 / Weinzierl BAOS 771
Ipad Air 2 / iridium v2.2
latest GUI Editor
Any suggestions?
Best,
Philipp
Iridium And ETS Clima
ETS
Iridium
Saving Scenes
I am trying to implement a project with scenes that are controlled and saved by push buttons and via Iridium. It seems that on some actuators the scenes are saved via the same GA from which they are called, however I cannot find the value/command to send to the actuator in order for it to save the scene.
I do not want to Iridium to control the scene (i.e. send the values to each lamp individually) as doing it this way will add redundancy to the system, if Iridium is down.
If anyone can point me to this information, or just tell me directly, that would be great.
Thanks,
Paul
Iridium + KNX
Здравствуйте. При подключении к KNX IP роутеру в эмуляторе Iridium выдает ошибку: Time of waiting for connection is over. Что это может быть и как это исправить? Спасибо.
Здравствуйте, Егор
Вам уже было отвечено в предыдущей созданной теме: http://support.iridiummobile.net/topic/1067156-iridium-knx/
Так как вы пишите на русском языке, ваш вопрос был перенесен в форум для русскоязычных пользователей.
iRidium native KNX driver (KNXnet/IP) doesn't work with ABB IPR/S 2.1 in Routing mode (nat=false)
In tunneling mode (nat=true) it works fine.
Also, from the same pc laptop (through the same LAN/WAN equipments) another KNXnet/IP client works just fine in routing mode.
Suggestion: the problem in so called ActionMessageCode.
Some KNX Routers/Interfaces might need this parameter defined, some need this to be 0x29.
ActionMessageCode is the first byte after header in KNXnet/IP packet.
For example, for Action packet header if [0..5] 6 bytes length. And the seventh [6] byte will be exactly the ActionMessageCode.
If ActionMessageCode is not 0x29, it will be always equal to 0x11.
Number of KNX group addresses with i2control V2.2
Are there a limitation on the number of KNX group addresses with i2control V2.2. I use the Weinzierl BAOS 772 interface that can handle 1000 address groups
Patrick
Iridium KNX + блок упр-я кондиционером Zennio
Добрый день. Пытаюсь реализовать управление кондиционером, все функции получилось настроить кроме установки режима. Для установки режима используется переменная unsigned 8 bit. В ETS для установки режима я отсылаю значения 0,1,3,9. Вопрос: Как в Iridium чтобы послать например установку режима "Авто" (значение 0) кнопка подсвечивалась оранжевым, а потом например при установке режима "Вентиляция" (значение 9), кнопка "Авто" погасла, а "Вентиляция" подсветилась. Спасибо!
Customer support service by UserEcho
