Hello,

after hours and hours of testing, installing, contacting support (thanks Oleg ;-) ), i found out that you can expect problems with some brands SD-Cards.

i used Kingston SDCIT/16Gb and SDCIT/32Gb cards with brand new Raspberry Pi Model 3, and have had much troubles with it.

After googling in the internet, i found out these cards are not 100% compatible with RaspBerry Pi.

So, please, take care for the right brand and type (also the type is important) using in RaspBerry Pi.

Thanks

Theo

Hi

We want a more workable logging in iRidium server.

For example:

a log-entry when server is rebooted (manual)

a log-entry when server is rebooted after power supply failure

a log-entry when internet is not available

a log-entry when clients are not accessible.

etc.

So --> more detailed and usable log-entries to debug errors in case of problems.

Thanks

Theo

Я создал на сервере (linux) канал и одноименный тег. При изменении канала значение, передаваемое в канал, сохраняется через вызов серверного скрипта (функция задана в Script Modiefer) в одноименном серверном теге:

function SaveChannelTagState(in_Type, in_Name, in_Value){
    IR.SetVariable("Server.Tags."+in_Name, in_Value);
}

На сервер значение тега меняется - видно через веб интерфейс.

В настройках тега установлены параметры 

• Persist = Yes
• Store in DB = Signed 32bit

Но стоит перезалить проект на сервер или перезагрузить сам сервер - все значения тегов теряются. Причем как-будто он берет значения из какого-то кеша. Значения устанавливаются не нулевые, а какие-то промежуточные, когда-то давно установленные.

Как это исправить? Надо чтоб значения тегов запоминались на сервере.

Как настроить дату и время на UMC сервере?

E меня сейчас 1970й год

Cash the data downloaded to the client for their displaying in a trend for one session.

Example:

Now:

1. Open the page with the trend.

2. The client starts downloading data from the database and display them in the trend.

3. Close the page with the trend (or minimized i3 pro).

4. Open the page with the trend again.

-> the data start to download from 0 - it takes time and if the data are received via the mobile Internet it also takes extra traffic.

What we want:

4. Open the page with the trend again

-> the data which were downloaded before are uploaded from cash and only new data is downloaded from the database (if there was some time since you last opened the page with the trend).

The data which are not required (out of the displayed Range) can be gradually deleted.

[ Filter ___________] for [x] Commands Name [x] Feedback Name [ apply] [clear]

or
[ Commands Filter ___________] [apply] [clear]
[ Feedback Filter ____________] [apply] [clear]

the second is preferrable, as command name may have nothing in common with Feedback name.

hi is there a way of sending a http command to server to trigger a macro,

I.e. To control IR device connected to a global cache device, 

iRidium Server 1.1.4/1.1.5 stopps the HDL requests via automatic timer after a few days running. Sending commands works but the timers are not running. With the HDL Wireless devices you have to pull each DryContact Status over and over again. That works only for a few days!

Hello,

I would like some help with server-side script, which would receive IP-notify from mobotix T25, so push notification could be sent.

This solution would be perfect as direct SIP call is not possible to iridium app, running in background mode.

Здравствуйте.

Когда планируется поддержка Z-wave для Server? Например через USB стики?